I have some history with the CH-54. In 1982, in Savannah, Georgia I was an airplane crew chief. The GA National Guard was flying these at the time. I went over and asked to go flying with them. They said no problem. So I hopped in the jump seat with a people pod mounted in back. We did a run-up and the rotor brake failed. So since I was a mechanic, the crew chief and I changed out the component and off we went to pick up the National Guardsman on maneuvers. I was in the back right next to the lever that disconnected the people pod. I was very aware of where that was. We flew them around, dropped them off and after the mission I thanked the crew and went back home. It was a cool experience, and I was struck by the massive size and power of the beast.
Welcome to IPMS/USA Reviews
Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.
IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.
Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact the IPMS/USA First Vice President.
To learn more about IPMS/USA, please see our About Us page.
The EC-145/H145/ UH-72 Lakota series of models from Revell-Germany are some really great kits. Each one is slightly different.
The large canopy is highlighted by a very large single wiper blade that is used for either side. The plastic parts in the kit are large and clunky. Quickboost’s wiper blade assembly is very petite and looks the part. There are three parts to the wiper assembly. They are molded on a single grey resin pour block. The actual wiper blade looks just like a real windshield wiper blade looks. This is attached to the wiper arms, which are mounted sideways on the block. It has two ‘arms’ that will fit nicely in the mounts that Revell has on the kit. The third part is part of the wire strike protection system and goes below the wiper blade base. This part is NOT included in the kit, but it appears to be on almost every H-145 that I can find. Great job Quickboost in recognizing this.
The Kitty Hawk UH-1D is a very good kit. Okay I’m biased, I helped design it. My logo is on the boxtop. There are some things that can be improved due to the limitations of injection molded plastic. That is where Quickboost comes into play. Inexpensive upgrades that make a visual difference.
The release of the HobbyBoss B-24 Liberator was long overdue. While the Monogram kit is a nice kit, it was showing its age with raised panel lines and some fit issues. On the heels of their 1/32nd kit of the same airplane, HobbyBoss released the 1/48th scale kit. They fixed some issues such as the wings but one of the criticisms of the kit is the shape of the engine nacelles. That is where this set comes in.
This is a pretty basic kit without much detail. I started getting the interior ready for paint. In this case I was going to use Rustoluem texture paint to get that “undercoated” look. Of course that meant masking off the side panels. While the side panels were masked. I went ahead and “undercoated” the chassis. Ties it all together.
The roll bar, tube bumpers, and wheels were painted gloss black and the coated with some powder that’s supposed to look like chrome. It doesn’t but gives a pleasant finish.
I use HOK Stratto blue paint on the body. Lightly wet sanded everything before laying on 2 coast of 2K clear.
Fit is good as there are few parts but it builds into a nice Bronco
I’d like to thank IPMS and Round 2 for the opportunity to build the kit.
