Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Allan Murrell
Published on
Company
Eduard
Scale
1/48
MSRP
$29.95

This is a photoetch interior set for the Revell Ventura Mk. II. This set includes two photoetch sheets. One is colored and adds a lot of needed detail to the cockpit. The photoetch really make the cockpit stand out.

In the packet is:

  • 1 colored photoetch sheet
  • 1 photoetch sheet
  • 1 instruction sheet

Summary

This is a fantastic set for a kit that needs it. The cockpit parts really add some detail. I did find some of the small parts were very tricky to add. Also, I would recommend installing the assembled parts 34 and 14 into part 7 before you fully form it. The set also adds details such as magazine boxes, navigators table, turret gun control panels, grab handles, and additional seat details.

Thanks go to Eduard for providing this set to review and IPMS USA for allowing me to review it for them.

Review Author
Dave Morrissette
Published on
Company
Furball Aero-Design
Scale
1/32
MSRP
$19.99

The movie Top Gun, love it or hate it, raised a lot of interest in the Navy Fighter Weapons School and that interest was not lost on modelers, with the markings of the Adversary planes standing out. Furball has given us an enormous sheet of markings covering thirteen different schemes covering 12 different of F-5Es and F-5Fs between 1976 and 1986. Note that this is different from the smaller schemes as they just couldn’t fit the T-38’s on the sheet. There is great news in that the markings included are all airframes so you could build all thirteen planes included.

The schemes included are:

Review Author
Clarence Wentzel
Published on
Company
Aires Hobby Models
Scale
1/72
MSRP
$13.99

The L-29 Delfin was a jet-powered trainer airplane that was designed by the Aero Company of Czechoslovakia. An excellent kit of the Delfin has recently been released in 1/72 scale by AMK. Although this kit, in my opinion, is very good, our friends at Aires/Quickboost have found some areas where the accuracy of various parts can be improved.

This set from Aires provides replacements for the kit elevator, rudder, and flaps. The four flap parts provide additional surface detail but mainly provide very sharp trailing edges. The flap parts also have some added detail molded into the sides of the flap parts. These parts must be carefully removed from their molding sprues because of their fine mounting struts.

The new elevator offers a slight improvement over the kit part. Surface detail is about the same but the Aires part has finer elevator tip counterbalances and of course, the trailing edges are sharp.

Review Author
Dave Morrissette
Published on
Company
Zoukei-Mura
Scale
1/48
MSRP
$75.00

Last we left off, the airframe was together with the parts and we were ready to paint. In preparation, I added the landing gear. To me, this allows the plane to sit up off surfaces while drying and these were sturdy and fit perfectly with the best attachment points I have seen. To start, I used Tamiya acrylic high gloss white thinned with lacquer thinner and sprayed the bottom and slightly up the sides. I masked off the intakes as they had a great demarcation line from the previous painting and the great design. I also shot the flaps, the rudder on the tail and all the landing gear doors. This dried quickly and I masked off for the Gull Gray. I masked around the edges and the rudder and used my Gyrocut to get some wavy lines. Tamiya yellow tape was used for all masking. I sprayed the top with Xtracolor thinned with lacquer thinner and set the plane aside to dry for a few days. I also gave both horizontal stabs a coat of gloss white.

Review Author
Allan Murrell
Published on
Company
Eduard
Scale
1/48
MSRP
$19.00

This is a photoetch Interior set to for the Revell Ventura MkII. This set is colored and adds a lot of needed detail to the cockpit and other areas. They really make the cockpit stand out.

In the packet is:

  • 1 colored photoetch sheet
  • 1 instruction sheet

Summary

This is a fantastic set for the set for a kit that needs them. I do find some of the small parts were very tricky to add. Also I would recommend install the assembled parts 34 and 14 into part 7 before you fully form it.

Thanks go to Eduard for providing this set to review and IPMS USA for allowing me to review it for them.