This TreadHead was recently persuaded to volunteer to review a Sci-Fi project and an Airplane! Not just any airplane mind you, but a 1/72 airplane… way outside my comfort zone! However, in every cloud there is always a silver lining, and that statement could not be truer than with this Meng F-102A.

Aires has added the Type A wheels and masks for the F6F Hellcat to their line of resin aircraft accessories. This latest addition is molded in a grey resin, is smooth, seamless and bubble free. When I compared the type A tire to the type B tire I found that the type A had a diamond tread look to it, while the type B had smooth sides and a few lines that circled the tire. That’s all I could find about the different types except that they were used as a “that’s what we have at the moment” type of application.

For comparison I pulled out a Heller Hellcat from my stash. There really is no comparison. The Heller tires are molded as separate halves that have to be glued together while the Aires parts are solid with no seam to sand down and the paint masks are a very welcome addition to assist in painting.

The usual “Heavy Appreciation” goes out to Hasegawa USA for providing IPMS USA yet another fantastic re-release of one of Hasegawa’s catalog for review.

This kit is a re-release of Hasegawa’s mid-1980’s F-1 models. The molds have endured the test of time, and no flash is present on this kit. Engraved panels, accurate details, tight construction, and a change in pace for F-1 lovers in the form of a new decal sheet. Although I like the standard F-1 Japanese three-color scheme, this was just, well, different!

Part 2 Review – Chassis, Engine, & Exterior

This is the second of a series of reviews of the MiniArt AEC Mk. II Armoured Car kit. Part 1 previously reviewed the kit contents and assembly of the driver’s compartment. This review includes the chassis, engine, and exterior. A subsequent review will include the turret and gun. Model Rectifier Corporation (MRC) has generously provided the review sample to IPMS.

Introduction

This is an excellent, highly detailed kit. The molding is very crisp with great detail, and the fit is excellent. There are a few difficult areas that will make the kit challenging for less experienced modelers, but it results in a nice, fun to build kit for more advanced & expert modelers.

MMD-Squadron has added a 1/48 scale US WW II era parachute to their True Details resin aftermarket parts line. The parachute is sculpted to represent a chute in pre or post-mission repose with integral pack, cushion, harness and hardware visible. It is well sculpted with an amazing amount of detail for such a small item.

This parachute would be a perfect diorama accent for any US WWII aircraft model, posed the way parachutes were typically placed on the wings or stabilizers of aircraft prior to a mission so pilots could quickly ‘suit up’ for a takeoff. Two parachutes come packaged on a blister card with a foam pad backing to protect the fragile features of the casting. They are molded in gray resin on a very thin layer of molding scrap. No assembly is required. They just need to be sanded off the small casting scrap, painted and positioned. A fresh #11 blade can then be used to carefully trim away scrap from the edges of the parachute without damaging the details.