The Mk. 84 general purpose bomb is a 2000 Lb. weapon which can be configured with different fins and fuses depending on its mission at the time. In this iteration, Eduard has provided a Mk. 84 with retarded fins, I believe based on the BSU-50/B parts to allow lower release and the plane to escape the blast radius.

Eduard’s set comes with two main bomb bodies, three styles of fuses, a photoetch fret with two pieces, decals, and instructions. Construction is simple- take your time and cut the main body away from the pour stub being careful of the rear fins. Sand smooth and add the photoetch to the rear. After that, all that is needed is to select the fuse type. The fuse can actually be added after the painting.

Color is simple with olive drab being the main choice. The decals are well done and settle very well. A little wash to accentuate the well molded details followed by a flat coat and done.

Quickboost is well-known for producing high quality, “drop in” resin replacement parts for many model kits from a variety of manufacturers. Many of the current Airfix kits are produced from new molds, and are exceptionally well molded and nicely detailed on their own. However, with the limitations inherent in the injection molding process, some parts can be improved with resin parts, which can be molded with a greater level of detail and accuracy.

UMM continues to make and issue tools that their owner John Vojtech has developed and used to make his award winning models. The UMM™ 3D Center Locating Tool Jig is one of those tools. What you get is two pieces of aluminum bolted together so that the bottom forms a v-shaped notch and the top forms a straight edge aligning with the point of the notch. The purpose of the tool is simple, find the exact center of a round or square object. This is extremely handy when you need that center for drilling out holes or attached things exactly on center.

We sincerely appreciate the manufacturer Kittyhawk for providing this kit to IPMS/USA for review! (and the usual thanks also to IPMS USA Reviewer corps leadership for sending the kit my way).

Kittyhawk, as a relative newcomer to the plastic model aircraft arena, is breaking new ground with each new release. First, they are delivering kits we old timers never thought we’d see. A look at their website shows a commitment to stepping up to the plate. Right now the 1/32 kits are causing extreme excitement, and rightfully so. Read on.

We customers are provided with a box espousing six marking options (one United States Air Force Gray, Two United States Marine, one Thai, and one Philippine Air Force. All are colorful options, and cover the bases for markings. By the way, the wing mounted zuni pods are NOT included in this kit; they are from a 1/32 crusader, more later.

We all need a cutting mat for our hobby area. Not just as a cutting surface, but as a work area and to prevent damaging the table/surface we are working on.

Squadron has released the latest on their tool line with a cutting mat on A3 size, with a 10x15 inch working area. One side is just plain green for general work and cutting, while the other side has a square inch pattern plus angle lines at 30, 45 and 60 degrees.

The surface is made of a self-healing material, meaning that your cuts would “heal-up” (i.e. disappear) and you will have a smooth surface to continue your work. I did a few test cuts -gentle ones, just drawing the blade on the surface- and next morning I couldn’t see any cut or “scar” for what matters.

This cutting mat is likely to last you a long, long time (I would bet at least a decade if you take care of it) plus it will protect your blades and your working surfaces. Get one, you won’t regret it.

Recommended.