What's New

Book Author(s)
Zibigniew Kolacha
Review Author
Dick Montgomery
Published on
Company
Mushroom Model Publications - MMP Books
MSRP
$35.00

Available in the U.S. from "Casemate", in Australia from "Platypus Publications" and in the UK from "Mushroom Models Publications", this book is one of several excellent books in the "Spotlight On" series. All books in this series feature approximately 50 color profiles of the aircraft in question, showing the markings and camouflage patterns seen on the aircraft and in varied national markings.

In this particular publication, illustrator Zbigniew Kolacha provides 50 color profiles of 44 F4U Corsairs. The introduction to the book, 2 pages, provides a short "biography" of this classic W.W.II aircraft. The remainder of the pages are given over to those 50 superior illustrations mentioned previously. Each profile is labeled with the BuNo, if known, the airframe numbers, Squadron affiliation, and area of service.

Review Author
Mike Lamm
Published on
Company
Hauler
Scale
1/35
MSRP
$18.00

Hauler produces photo-etched and resin upgrade sets for armored fighting vehicles (AFVs), airplanes, cars, railway vehicles, and dioramas. They also produce a few resin kits. Their products are in most of the common scale sizes, 1/72, 1/48, and 1/35, but they also produce a number of other items in common railroad hobbyist scales.

The kit for this review is a set of sharply cast resin Dragon’s Teeth. Dragon’s Teeth are those square concrete pyramids, most often associated with the Siegfried Line in Germany during World War II. However, these types of fortifications were used in many countries, other than Germany in World War II, and continued to be used today around the world. The idea behind these formations was to create an obstacle to slow the advance of enemy AFVs, or to channel those vehicles into prepared kill zones where anti-tank units waited in ambush.

Review Author
David Horn
Published on
Company
Plusmodel
Scale
1/48
MSRP
$10.00

Plus Model, maker of fine detailed aftermarket products, just produced a ladder for the McDonnel Douglas F-15 Eagle. What is unique about this item is that it is injection molded instead of resin or photo etch that other companies make. Although this does require some assembly, being able to make fine adjustments to better fit the various kits is a real bonus.

The kit comes in a sturdy box and the sprue is in a suitable plastic bag. The instructions are printed on the back of the box and are basic but sufficient to assist your build. The 8 parts have minimal flash which cleans up easily.

Assembly was simple but when I test fit the ladder just after assembly. Remember to always check your references and test fit on your kit.

Review Author
Paul R. Brown
Published on
Company
Advanced Modeling
Scale
1/72
MSRP
$13.45

The KH-29 (NATO: AS-14 'Kedge') is a Soviet air-to-surface missile with a range of 10–30 km designed for hard-to-hit targets such as reinforced concrete aircraft shelters, runways, reinforced concrete bridges and shall ships. It has a large warhead of 320 kg and can be fitted with a variety of seeker heads/guidance systems such as laser, infrared, active radar or TV guidance. The missile is typically carried by tactical aircraft such as the Su-17M3/4, Su-24M, Su-25TM/SM, Su-30, Su-34, Su-35, MiG-27M/K MiG-29SMT and the MiG-31.

Review Author
Allan Murrell
Published on
Company
Eduard
Scale
1/48
MSRP
$12.95

This is a mask set for the ICM Ju-88A-4 Kit. This set helps you save time masking the many canopies and glass areas plus the wheels by providing all you need in pre-cut masks.

In the packet is:

  • 1 precut masking sheet
  • 1 instruction sheet

The masks are for the front windscreen, main canopy and the wheel hubs

Summary

This is very good and time saving when it comes to masking. This is perfect for this kit and really helps due to the amount of glazed areas on the JU-88.

Thanks go to Eduard for providing this set to review and IPMS USA for allowing me to review it for them.

Review Author
Damon Blair
Published on
Company
Videoaviation
Scale
1/32
MSRP
$12.00

If you are building a 1/32 diorama of a modern USAF aircraft, these two Crew Chiefs would be a perfect addition. Having one or both of these figures would make the diorama “come alive”.

In the package, you get two figures, molded in resin, consisting of five parts. One figure is in the “Parade Rest” position, which is usually the pose that Crew Chiefs take when a jet is ready to taxi out. This figure comes as one piece on a runner. The runner is at the bottom of his boots. I found the resin to be very easy to cut with an X-acto style saw. One word of caution here – cut off slightly below the soles of the boots, and then sand the bottoms of the boots using sandpaper mounted on a flat surface. By doing this, he will stand upright without using any glue.

Review Author
David Horn
Published on
Company
Plusmodel
Scale
1/48
MSRP
$10.00

Plus Model, maker of fine detailed aftermarket products, just produced a ladder for the Russian SU-27 Flanker. What is unique about this item is that it is injection molded instead of resin or photo etch that other companies make. Although this does require some assembly, being able to make fine adjustments to better fit the various kits is a real bonus.

The kit comes in a sturdy box and the sprue is in a suitable plastic bag. The instructions are printed on the back of the box and are basic but sufficient to assist your build. The 15 parts have minimal flash which cleans up easily. There are eight steps with a small recess which are likely through holes on the real step. Note that the pattern is not symmetric and the instructions do not indicate what direction they go. Just note that so you can align them in the same direction.

Book Author(s)
Alan C. Carey
Review Author
Frank Landrus
Published on
Company
Ginter Books
MSRP
$39.95

Steve Ginter’s Lockheed F-94 Starfire is one of three of the latest in his Air Force Legends series. This edition is in their standard 8.5” x 11” format softbound publication that is 160 pages (excluding covers). I counted 406 photographs (15 in color) along with 82 drawings and 63 insignias.

Author Alan C. Carey is a noted military historian who was born in Orange County, California in a career military family. Carey got to Texas as soon as he could and achieved his Baccalaureate and Masters degree at Southwest Texas State. His interest in military aviation is primarily due to his father’s service from 1942-1966. Carey’s research on his father resulted in his father (and two members of his crew) receiving Distinguished Flying Crosses and Air Medals for their WWII service with VB-109. He ended up serving in the Marines as a machine gunner and in the Army Reserve ass a Nuclear, Biological, and Chemical Defense Specialist.

Review Author
Camden Koukol
Dave Koukol
Published on
Company
Airfix
Scale
1/72
MSRP
$44.99

Background

"Four things won the Second World War-the bazooka, the Jeep, the atom bomb, and the C-47 Gooney Bird," said General Dwight D. Eisenhower.

The Dakota, the C-47’s designation in service with the Royal Air Force, was used in European and Southeast Asia (SEA) theaters of operation by the British throughout WW II. Modified from the civilian DC-3 airliner design, C-47/Dakota transports provided a host of unique benefits which included exceptional speed, payload, reliability, ruggedness, and versatility. Dakotas hauled everything from oxen to airborne troops, often operating from unimproved or improvised airfields near front lines.

Review Author
Keith Gervasi
Published on
Company
Eduard
Scale
1/48
MSRP
$29.95

History

The Avia B.534 was developed in 1934, and although obsolete by the time WWII started, it was used in combat as late as 1944! The 534 went through a few changes along the way, most notably the cockpit and landing gear. A 534 is credited with having been the last biplane to record an aerial victory (A Hungarian Ju 52 on Sept. 2nd, 1944).

The Kit

Inside the box are 4 sprue of grey and 1 of clear plastic, a decal sheet, photo etch fret, a sheet of painting masks and a 16-page instruction booklet. The plastic is is nice with very fine lines, little to no flash and no noticeable sink marks. The pre painted photo etch looks nice and the decals are very nice. One thing Eduard did was scale back on the photo etch fret as it looks like they give you just the parts needed for the III.Serie.