What's New

Book Author(s)
Edwin M. Dwyer III
Review Author
Paul R. Brown
Published on
Company
Crecy Publishing, Ltd.
MSRP
$42.95

Originally published in 2009 as a single volume, this book has now been republished as Volume 1 of a multi-volume set. The author has had access to previously unpublished information regarding Japanese Army and Navy aircraft designs during World War II and has put together a very interesting look at what could have been.

The book is a hardbound volume with a nice dust jacket cover that has color illustrations of several of the designs discussed in the book. The book is printed on glossy paper which helps the many illustrations and color photographs to stand out. It includes not only color illustrations of the each design, often in hypothetical squadron markings, based on squadrons that actually existed during the war, but also includes numerous color photographs of surviving airframes, many of which are in a sad state of repairs while awaiting restoration.

Review Author
Bob LaBouy
Published on
Company
SBS Model
Scale
1/35
MSRP
$34.31

History

This is a review of the SBS T-72 M early turret, for the Tamiya T-72 M1 kit. As such, the model requires the Tamiya kit for almost all parts needed in this build (aside from the basic turret itself).

Kit

This box contains 11 resin cast parts, a sheet of decals, 55 separate photo-etched parts, as well as a printed outline of where all the P-E should go’

Though I have a limited amount of experience with PE and resin, I volunteered to undertake this review because I have acquired a ‘taste’ for the Soviet bloc armor and thought this would help expand my modeling knowledge and enjoyment. On second thought, my ambitions may have exceeded my grasp of the undertaking at hand.

Review Author
Roger Rasor
Published on
Company
Master Model
Scale
1/48
MSRP
$8.00

Master-Model offers modelers three different sets of turned metal parts that can be used in place of the Special Hobby kit’s plastic parts to add extra detail to models of the Fairey Firefly. These sets are available in both 1:72 and 1:48 scale. This set (AM-48-097) provides parts to assemble crisply detailed 1:48 scale Hispano 20mm cannon in short fairings for the Fairey Firefly.

The Master-Model parts are designed to replace the injection molded ones in Special Hobby kits without significant surgery. Since the kits already have holes on the wings’ leading edge to install the injection-molded parts, the Master-Model barrels should literally drop in place instead. (Although the size of the holes may need to be increased to 1.5mm diameter to accept the plug on the end of the fairings).

Review Author
Ben Guenther
Published on
Company
Dragon Models
Scale
1/35
MSRP
$64.00

The Berlin Airlift and the beginning of the “Cold War” placed new emphasis on the US postwar tank program. The result was the emergence of three basic designs; the T41 light tank, the T42 medium tank and the T43 heavy tank With the start of the Korean War in 1950, T43 production was authorized. Continual testing and slight modifications resulted in the T43E1 which in turn became the M103. Many small defects were found but with the existence of a state of war it was felt justified to begin production of 200 heavy tanks. Most of these defects were corrected and the modified vehicles became the M103A1. The US Army placed their tanks in Europe to serve along side the M48s. However, with the rise of anti-tank guided missiles even the thick armor of the M103A1 was becoming obsolete, so in 1963 they withdrew the heavy tank force from Europe and offered these tanks to the Marine Corps.

Review Author
Floyd S. Werner Jr.
Published on
Company
Master Model
Scale
1/48
MSRP
$10.00

The MiG-19 and Chinese version of it, the J-6/F-6, are essentially the same aircraft. The Chinese version had an additional wing hard point on each wing. One thing about early MiGs is that they had long pitot tubes. In plastic they are fragile and easily bendable. The clean up of the plastic part is difficult to ensure that you keep a round cross section. Then if you are like me I ALWAYS break them off, either on the way to a show or just in handling the model.

Review Author
Dick Montgomery
Published on
Company
Dragon Models
Scale
1/48
MSRP
$52.99

Are you familiar with Japanese Puzzle boxes, sometimes called “trick boxes” or “secret boxes”? A Puzzle box is a box that can only be opened through some “obscure or complicated series of manipulations”. The boxes contain a good luck charm and are designed to trick or confuse the person attempting to open them. Some require only a handful of movements in order to slide the various parts of the box into an “open” configuration, and some require hundreds of manipulations. Indeed, Japanese Puzzle Boxes are known for their complex and challenging design but they are also known for their intricate geometric patterns and their exquisite engineering and construction.

Review Author
Tom Moon
Published on
Company
Dragon Models
Scale
1/35
MSRP
$64.99

This kit is a model of a prototype by the Henschel company.

This is a multimedia kit comprised of 420+ styrene parts, DS tracks, 4 preformed photo etched parts, and 2 preformed steel wires, and a much better set of instructions, but they still need to be reviewed carefully before gluing any parts together.

Step 1. This step is the assembly of the drive sprockets, and idler wheels. There is a lot of the rear plate that will have some material removed.

Review Author
Floyd S. Werner Jr.
Published on
Company
Delta One Decals
Scale
1/48
MSRP
$12.00

Delta One has been producing some unique decals, especially for the Bf-109. So that means that I had to check them out. This particular sheet covers the Yugoslav Air Force Bf-109s in service from 1945-53.

This sheet comes in a ziplock baggie that contains an eight page booklet with history and line drawings for the subject aircraft. There is a little history on the 109 in Yugoslavia. There is also a brief description of each aircraft including the colors and historical use.

Decals are provided for six aircraft, four G-6 aircraft and two UMe-109, which is a version of the G-12. The profiles have both side views, top view and a partial bottom view. The aircraft are interesting with some unique paint schemes. The actual decals are on 3 x 3 inch sheet. They are printed in perfect register, thin and with good color saturation.

Review Author
Tom DeMichael
Published on
Company
Hasegawa
Scale
1/48
MSRP
$59.99

In 1993, the 425th Fighter Squadron was reactivated to provide Singapore’s F-16 pilots with the latest weapons and tactical training. For the 20th anniversary of the training, certain Singapore Air Force F-16Ds were painted for the occasion.

There are roughly 140 parts in the kit, however some of them aren’t used, as they are spares for the different block version. The kit also comes with the additional spline sprue so the original tail isn’t used. There are 18 total sprues, one of which is clear, and the decals allow you to make two different tail numbers. Unfortunately you’re not given all the pieces to make it look like the box art so I deviated from the instructions a little. The only molding issue I saw was with the cockpit glass also had a line down the middle from the molding.

Review Author
Floyd S. Werner Jr.
Published on
Company
Master Model
Scale
1/48
MSRP
$7.00

The Heller Mirage IV is a slightly older kit, but still the only option in town. The Mirage IV has its refueling boom off of the nose so it sits out there just waiting to be knocked off or bent. Enter Master from Poland.

Why do would you want to use the Master turned metal part? Well there are numerous reasons. The first, and most important, is that turned metal is stronger. Another reason is that you don’t have to worry about the mold line or keeping the round cross section all the time worried about losing detail. These reasons are enough for me to use the metal parts.

Packaged in a Ziploc bag, this set is a single piece of machined aluminum. The refueling boom is perfectly rendered and captures the shape of the tube and probe. This set is simply a replacement of the kit boom. You may not even have to drill the hole unless you accidentally filled it with slurry of plastic while gluing the nose.