What's New

Review Author
Pablo Bauleo
Published on
Company
Aires Hobby Models
Scale
1/48
MSRP
$12.00

Aires Models from Czech Republic specializes on aftermarket details; for the most part releasing “drop-in” resin replacement parts.

This set is intended to replace the wheels of the 1/48 Trumpeter L39Z0. The parts are molded in grey resin, free of bubbles or imperfections and with great surface detail, down to the manufacturer of the tires molded with enough raised detail that will take dry-brushing fantastically!

The attachment points of the wheels to the casting blocks are miniscule and removal and clean up should be an easy task. The resin wheels are of the “non-weighted” variety.

In addition to the resin parts, they include painting masks which are super-handy to have and use. The masks are pre-cut so it is as simple as peeling, placing and you are ready to airbrush.

Highly recommended.

I would like to thank Aires Models and IPMS/USA for the review sample.

Review Author
Ron Bell
Published on
Company
Atlantis Model Company
Scale
1/490
MSRP
$21.99

The Kit

Atlantis continues to re-release some of the kits a lot of us grew up with. This example is the 1954 Revell U.S.S. Pittsburgh. The kit was re-released many times over the years as the Pittsburgh, the Helena and with new parts updating it with Terrier missies as the Boston and Canberra. This release is in its WW II guise. You get decals for every ship in its class (Baltimore heavy cruisers), but you run short of bow numbers for some, like the one I did, the U.S.S. Toledo. The model is a member of Revell’s “Flat Bottom Navy” and has no hull detail and a flat bottom. Better for scooting across the floor by young budding captains I suppose.

Book Author(s)
Karoly Bera, Marcin Ciepierski and Richard Kovalcik
Review Author
Dave Morrissette
Published on
Company
Kagero Publishing
MSRP
$24.95

The Kit Build series from Kagero focuses on model builds of a specific type of aircraft and gives several examples. In this case, the focus is the F4U Corsair. There are three builds covered and they are:

  1. Tamiya 1/72nd scale by Richard Kovalčik, Birdcage Corsair
  2. Tamiya 1/72nd scale by Marcin Ciepierski, Early Corsair
  3. Tamiya 1/48th scale F4U-4 by Karoly Bera

The books are written with the English language version in the left column and the right column in Polish. The book includes 64 pages and each build is about 20 pages. Also included at the end are four color profiles of the Corsair and a book sized poster of the Corsair for framing.

Review Author
Chris Martin
Published on
Company
Italeri
Scale
1/35
MSRP
$44.99

Summary

This appears to be a re-issue of an older kit. While the level of detail is okay, the details themselves are a bit soft. The parts layout and build sequence is simple and straight forward. Anyone with a kit or two experience should not have any troubles with the few issues I encountered.

Background

The Opel Blitz was the "working mule" of the Wehrmacht during World War II. It was deployed on all fronts in multiple variations. Thanks to the sturdy frame, robust rigid axles with leaf springs and twin back wheels the Opel Blitz could carry a payload of over 3 tons. While the most popular version was a rear-wheel-drive 4x2, a 4x4 version was operated in both Russia and North Africa. A model with the rear wheels replaced with tracks also saw action in the Russian and European theaters.

This kit depicts the 4x2 mobile command post with radio communications for battlefield management of ground troops.

Review Author
Tim Wilding
Published on
Company
Das Werk Scale Models
Scale
1/35
MSRP
$29.99

This munition hauling vehicle kit comes is a small, 7 inches by 11 inches, sturdy box. There are three tan color sprues individually wrapped in plastic, a separate hull and a small bag with four track lengths. I am not sure why this bag is in the kit, because the tracks are all on a sprue. I did not need to use them. The small decal sheet has 11 decals on it. The instruction booklet is small too, 9 inches by 7 inches. It has an antique paper look with seven steps on eight pages. The front shows Das Werks and Amazing Hobbies logos, so that tells me this is a partnership between these two model companies. The assembly instructions are typical line drawings and easy to follow. There are four full color painting and marking guides on the last two pages with Ammo by Mig color information. There are no photo-etched or clear parts.

Book Author(s)
Robert Pied, Nicolas Deboeck
Review Author
Pablo Bauleo
Published on
Company
HMH Publications
MSRP
$31.00

I discovered HMH Publications and Duke Hawkins Series recently and they are quickly becoming favorites of mine. The quality of the content that is covered (i.e level of detail) and the printing are fantastic. The paper quality is super, with a satin finish. All pictures are in color, with proper exposure and very sharp focus, so all details are crisp.

The pictorial book is split in the following sections: Types, Forward Fuselage, Fuselage, Air Intakes, Wings, Cockpit, Front Landing Gear, Main Landing Gear, Vertical Tail, Maintenance, Engine, Pylons, Action and then an extra 20 pages on the Mirage 5 and Mirage 50.

As you can see, the pictures have very descriptive and relevant captions, helping you understand what detail is being highlighted in each image. Not only you are getting all the walk-around images you need for your build, you are also learning details of the aircraft as you read along.

Book Author(s)
Anthony Cooper
Review Author
Hub Plott
Published on
Company
Fonthill Media
MSRP
$45.00

This book covers Australian Sunderland operations against the U-boats in Europe in 1942 to 1943. The book is divided into 10 chapters along with an introduction and three appendices, telling the stories of Nos. 10 and 461 Squadrons and their exemplary service in the RAF’s Coastal Command. Serving from UK territorial waters to the Bay of Biscay these Sunderland crews faced the many hazards of weather, long patrols over sea, German fighters, and flack.

These two squadrons were responsible for sinking 11 German U-boats and one Italian submarine. Of the 54 aircraft used by these squadrons, 23 were lost. 12 were shot down by enemy aircraft, 6 crashed on takeoff or landing, 1 disappeared after an SOS and another was lost at sea, after engine failure, 1 was shot down by a U-Boat, 1 exploded while in flight and another crash landed on an airfield.

Review Author
Ben Morton
Published on
Company
ICM
Scale
1/48
MSRP
$21.00

The Ryan Firebee is a series of target drones developed by the Ryan Aeronautical Company beginning in 1951. It was one of the first jet-propelled drones, and remains one of the most widely used target drones ever built.

The Firebee I was the result of a 1948 U.S. Air Force request and contract to Ryan for a jet-powered gunnery target. The first flight of the XQ-2 Firebee prototype took place in early 1951. The drone featured swept flight surfaces and a circular nose inlet. The initial models had distinctive "arrowhead" shaped end plates on the tailplane. The Firebee could be air-launched from a specially modified launch aircraft (Douglas A-26 Invader was first to be used for this), or ground-launched with a single RATO booster.

Book Author(s)
Marek Rys
Review Author
Pablo Bauleo
Published on
Company
Kagero Publishing
MSRP
$24.95

The Topdrawings series specializes in line-drawings of a given subject in each booklet. The 104th installment in this series is devoted to the Dewoitine D.520.

This booklet has line drawings (front, back, left, right, top, bottom, plus fuselage contours) for the D.520 C-1 early series (long spinner), D.520 C-1 late series (short spinner) and the two seat trainer the D.520 DC. All drawings are reproduced 3 times: in 1/72, 1/48 and 1/32 scale (in a pull-out sheet). There are also drawings describing the armament setup and access panels.

In addition to the B&W line drawings, you also get 2 color profiles, in some cases with multiple views (left side, right side, etc) of the same aircraft. Markings are for French service.

The booklet also includes a brief description on the overall history of the aircraft.

If you are looking for detailed drawings of the D.520, this book is the answer.

Highly recommended.

Review Author
Allan Murrell
Published on
Company
Das Werk Scale Models
Scale
1/25
MSRP
$32.95

This kit is a collaboration between Das Werks and Customscale and what a great little kit. The subject matter is a Rheinmetall experimental Flak Weapon with 8 barrels. There is one one example still around which is in a Moscow Museum. There is not official records or documents around anymore on this subject. The only reference I could find was an old “Nuts and Bolts” publication with a photo walkaround of the one on Moscow.

The kit contains

  • 4 sprues molded in light grey styrene
  • 1 Photo Etch sheet
  • 1 instruction booklet.

Construction

The instruction booklet is great and very detailed to assist in the build. There were a couple of minor errors that I list below that I found during the build.

Section 1 is the Base Assembly made up of 5 simple sub sections. These all went together very easily and with no issues.