What's New

Review Author
Mark Aldrich
Published on
Company
Master Box Ltd
Scale
1/35
MSRP
$21.95

Master Box continues to release some really nice and different figure sets. These rests are very different than other sets on the market and usually very “in action” type poses. They also make a series of dual sets. These are designed to be easily made into a combat action series of figures. On their website, this is listed as #2 which means the German figures should be #1. The only issue is that there currently is no #1 set. There is however, an Italian Infantry in Africa set #1 and this must be the set to be used in conjunction with the #2 set.

Review Author
Dick Montgomery
Published on
Company
Aoshima
Scale
1/72
MSRP
$39.98

A Brief History

The High Transfer Vehicle nicknamed “Kounotori” or “White Stork “was designed as an unmanned resupply module for the Japanese Experiment Module and for the International Space Station. JAXA (Japan Aerospace Exploration Agency) began development and design work in the early 1990’s with the first flight of “White Stork” taking place on September 10, 2009. “White Stork” can dock with the I.S.S. and unload its cargo in a shirt sleeve environment. Cargo can also be unloaded through a large opening in the fuselage of the “White Stork” using the Canada2 arm. Cargo can be mounted on a retractable payload “sled” which simplifies the extraction of the cargo, and that “sled” is represented in this excellent kit.

The Model:

Review Author
Charles Landrum
Published on
Company
Quickboost
Scale
1/32
MSRP
$6.25

Quickboost continues to deliver targeted resin details; designed to improve one overlooked aspect of a model, for a wide range of subjects. Here are three recent releases:

Quickboost states on their website that this set is for the Trumpeter Mig-29A. Unfortunately Trumpeter has only modeled the later model Mig-29s, the –K and –M variants. So I reviewed these covers against my Mig-29K build up and Mig-29A kit.

Review Author
Dave Koukol
Published on
Company
Revell
Scale
1/302
MSRP
$16.95

US Coast Guard Cutter Roger B. Taney retains the claim to fame as the last surviving vessel of the attack on Pearl Harbor on December 7, 1941. Its keel laid in 1935 and commissioned in 1936, Taney served for over 50 years, seeing combat action during World War II and Vietnam, as well as performing weather station, search-and-rescue, and drug interdiction duties. Taney was decommissioned on December 7, 1986, and presented to the City of Baltimore, and now serves as a museum ship.

Review Author
John Tinay
Published on
Company
Revell
Scale
1/25
MSRP
$22.95

Ed “Big Daddy” Roth’s Beatnik Bandit was introduced to the automotive public as the May ’61 cover of Car Craft magazine. The second in his series of show cars, it became popular as it toured the custom car show circuit in the early 60’s. In the next years, “Big Daddy” Ed Roth continued to improve the breed of custom show cars with his creations. The “Fiberglass Wonder” is now permanently housed in Reno, Nevada in the National Auto Museum.

This kit was originally released in the 60’s and has been re-released multiple times. In this incarnation, there are 128 parts, some of which are not called for in the instructions. The kit includes a detailed chassis and suspension, with a blown V-8 engine. The bubble top is hinged and the front wheels are positional. Molded in solid white and clear plastic, there are also numerous chrome-plated parts and soft black tires. The decals are for the authentic Ed Roth designed paint scheme.

Review Author
Rick Ewing
Published on
Company
Eduard
Scale
1/48
MSRP
$34.95

The Albatros D. III was built under license by the Oesterreichische Flugzeugfabrik AG (Oeffag), totaling 281 aircraft (153.01-153.281). These aircraft had beefier lower wings and the powerful 200-hp Daimler engine. The spinner had a nasty habit of coming off during flight and damaging the airframe. Starting with 153.112, the nose was blunted for the remainder of the production run. This change also increased the speed of the aircraft another 9 mph. The main drawback of the plane was the buried and slow firing Schwarzlose guns. At the insistence of the pilots, these were placed on top of the fuselage in the following 253 series.

Review Author
Robert DeMaio
Published on
Company
Italeri
Scale
1/48
MSRP
$56.00

Brief History:

The Junker Ju-87 was developed as a dive bomber for a design competition in the United States in the early 1930’s. Ernst Udet was a leading WWI ace who was part of the new Luftwaffe and had a strong influence on the aircraft performance requirements that the companies had to meet. In 1936 three German aircraft companies competed for a dive bomber. The Ju-87 was most impressive, executing an almost vertical dive and pulling out of it with ease. The competitor He-118 had separated from its propeller and gear box, which was the deciding factor to award production for ten Ju-87A-0 aircraft. The B-2 version used the Jumo 211Da engine with a pressurized coolant radiator, larger propeller and rear pointing exhaust stacks to increase speed. A small propeller mounted on one or both strut boots created a sound during the Stuka’s dive that came to be a psychological effect on people below within hearing range.

In the Box:

Review Author
Roger Carrano
Published on
Company
Eduard
Scale
1/32
MSRP
$54.95

When I first saw this engine on Eduard’s web site, I knew this was going to be, without a doubt, the best version of this engine ever made by any company. This even includes Eduard themselves, because this engine is being used in their kits of the Bf-109 and the Bf-110. I thought at the time that I would ask if I can use this kit to include in my review of the BF-110 but, after receiving it and seeing how great the detail was, I decided to build it as a stand alone and not let all that detail be hidden from view.

Review Author
Roger Rasor
Published on
Company
Ultracast
Scale
1/32
MSRP
$17.95

Ultracast has added a 1/32 scale RAF Battle of Britain pilot to their growing line of resin figures. With the recent releases (and rereleases) of numerous 1/32 scale Spitfire kits, it’s not surprising that this manufacturer has chosen this time to offer a kit that builds into an appropriate figure for this aircraft.

Five light cream-colored resin parts make up this kit and, as with all other offerings from Ultracast, the parts are beautifully cast and bubble free. As the photo below shows, the kit provides the main torso, head (with flying helmet and goggles), left and right arm and legs that are attached to pour blocks by thin connecting sprue that are very easy to remove and clean up. Overall, the details are crisp and the proportions are believable. The flight uniform, boots, helmet and goggles are well sculpted and face is exceptionally well rendered.

Review Author
Rod Lees
Published on
Company
Eduard
Scale
1/48
MSRP
$26.95

I can’t thank Eduard enough for their support of IPMS USA. We have ample opportunities to review their excellent products, and we reviewers certainly appreciate Eduard’s providing us with the finest photoetch on the planet! (An opinion of this reviewer, but I believe it’s true!)

This is a simple conversion to the Tamiya 1/48 Betty kit interior parts. When you hold the basic kit items up with the Eduard upgrade you notice the difference.

This set is intended to provide a better instrument panel and engine control cluster in the center console stand, and appropriate seat belts to better define the cockpit interior under Tamiya’s huge clear canopy. There are also several instrument panels for the side walls. As you can see the instrument panel is the star of this set.