Review Author
Jeffrey Brown
Published on
Company
Hasegawa
Scale
1/32
MSRP
$90.00

I recently built the Hasegawa 1/32 scale Bf-109 F4 “Jabo” version. This was a great kit to build. In fact, if by some miracle I win the lottery or find a decently paying job, I actually plan on picking another one up.

The decal sheet gives you three versions to build: Oberleutnant Frank Liesendahl from 10 Jabo /JG2, Unteroffizier Felix Sauer from 10 Jabo /JG53, and Oberleutnant Werner Langemann, 10 Jabo /JG53. Unlike the Hellcat I reviewed a short while ago , the decals for this kit were crisp, clean, and really well done. The white is a clean, bright white, and the Blue 1 I plan on using for Liesendahl’s aircraft looks like it will stand out when applied.

Review Author
Ben Guenther
Published on
Company
ICM
Scale
1/35
MSRP
$56.95

During WWII, the German Wehmacht used a varity of truck types for their supply system. The most numerous were the 3-ton trucks, and of these many were the V3000S, produced at the Ford plant in Cologne. With the invasion of Russia, it quickly became obvious that tracked vehicles were vital if supplies were to be delivered. A solution was found to develop an add-on track system that could be bolted to the frames of different types of 3-ton trucks. When added to the Ford V3000S, it became the V3000S/SSM (Sd.Kfz.3b) Maultier. The Opel truck became the Sd.Kfza, and so on; they were all called Maultiers (German for mule).

Review Author
Jack Kennedy
Published on
Company
Hasegawa
Scale
1/72
MSRP
$58.99

I happen to love F-86s in any shape or form, and the “D” is one of my favorites. I have built a few in the past in most scales and welcomed this one by Hasegawa in 1/72 as I never built one in this scale.

With this kit, Hasegawa chose to do it in the unusual “Shark Mouth” markings. This is a pleasant change from the usual marking as seen on most “D” models.

Upon opening the box, I was greeted with the usual Hasegawa silver plastic in four sprues, plus a clear one. The moldings were crisp with engraved panel lines. I had looked at an older kit of the “D” by Hasegawa and it seems to be the same kit, only with new decals.

Assembly was straightforward with no fit problems. The wings went on without the need of filler. One must remember to add a weight to the nose to prevent tail dragging. The cockpit was very nice; however, I think that seat harnesses could have been molded to the seat for a better look. I added some from tape.

Book Author(s)
Rob Broom
Review Author
Mike Hinderliter
Published on
Company
Scarab Miniatures
MSRP
$49.95

I started war gaming when I was in high school because I was always interested in military history. I’ve also wondered about the “what if” scenarios of different battles. My interest in the subject just stayed with me through college and even into the Navy. I remember while I was at the anti-submarine warfare base in San Diego, California, my barracks room mates and I used to push our bunks out of the way and play General Quarters, metal warships and all. So when they wanted someone to review the War and Conquest rules book, I just had to jump at the chance to do it.

Review Author
Tom Moon
Published on
Company
Dragon Models
Scale
1/35
MSRP
$62.99

This kit is basically a slightly upgraded re-box (reboot) of their Premium Edition Kit 6317 that came out in 2008. The new parts are two photo etched tool boxes instead of one, a newly designed photo etched tool box to fit on the rear of the fighting compartment, different Magic Tracks specifically for the Kursk campaign, and a new set of decals that are supposed to allow you to build any vehicle that served with the s.Pz.Jg.Abt.653 or s.Pz.Jg.Abt.653 units at Kursk.

This is a multimedia kit comprised of 270+ styrene parts, magic tracks in the early pattern, three photo etched frets, a turned aluminum gun tube, decals, and the set of instructions that need to be reviewed very carefully before gluing any parts together. Most Dragon models today are a collection of old sprues with new sprues added to create a new kit variant, and Dragon has done so with this kit.

Review Author
Doug Hamilton
Published on
Company
Morland Studios
Scale
1/32
MSRP
$19.99

I was intrigued in seeing a 54mm bust available for review. I had painted a few larger scale busts, and have also painted a number of 54mm figures, but never a bust in such a small scale. I asked to review it and subsequently received the Morland Studios 54mm offering of a – or would it be The – Vampyre Lord? I finally settled on The Vampyre Lord because I couldn’t find anything relating him to a gaming scenario or a story line, so I see him as a standalone character. Not personally knowing any vampyre lords, it’s always so hard to figure how they would like to be addressed!!!

Review Author
Mike Hinderliter
Published on
Company
Master Model
Scale
1/72
MSRP
$3.50

Master Model is a company that makes turned brass aftermarket parts, specifically pitot tubes, refueling probes, and antennas.

The first thing I would like to point out is how good the packaging and instruction sheet is. The packaging consists of a zip-lock type bag, while the part is in a smaller bag, keeping it from moving all over. The instruction sheet is very clear and easy to understand, only needing 3 steps. Cut off original part, drill a hole (0.8 mm), glue in the new metal part – complete. Just be careful drilling the hole, especially in 1/72.

When compared to the kit part – there is no comparison. The kit pitot tube looks like a little blob of plastic, while the Master Model part is a complete work of art. Once you use a couple of these pieces you will be completely spoiled and never want to use the kit pitot tubes again.

Review Author
Steve Zajac
Published on
Company
Round 2 Models
Scale
1/25
MSRP
$25.99

To honor funny car racers of the ’60s and ’70s, Round 2 LLC announced last year that it will be releasing a new drag racing memorabilia line called "Legends of the Quarter Mile." The first model kit released was Arnie "The Farmer" Beswick's 1969 GTO funny car known as the "Super Judge." Hailing from Morrison, Illinois, Beswick is a legend in his own time. He is the most well-known Pontiac drag racer in the world. For over 50 years, his successes have made him a fan favorite. Keep in mind this nostalgia kit was originally issued in 1969 by MPC, and has been reissued several times since, this time in a very cool original box art. As it’s an older kit, expect to spend considerable time cleaning up the parts. Round 2 has also added "MH Racemaster" printed slicks and very nice Beswick decals. The assembly breaks down into several sub assemblies:

Review Author
Scott Hollingshead
Published on
Company
Eduard
Scale
1/4
MSRP
$29.95

Should you be looking for a little something different to build, I would like to point you in the direction of this one-quarter scale instrument panel that is being offered as a Limited Edition release by the folks at Eduard. The kit assembles with relative ease, and is a good representation of the instrument panel used in the Messerschmitt Bf-110C variant, although the variant is only mentioned once on the side of the box. The needles used in the various gauges are the only tricky items to handle during construction, so this would be a good item for modelers fourteen and up, as the box recommends.

Review Author
Mike Kellner
Published on
Company
Sword Models
Scale
1/72
MSRP
$44.99

The North American T-28 was used by both the Air Force and Navy and was designed as a replacement for the old T-6/SNJ. It saw use in the American military from the 1950's until the mid 80's. In the end there were 4 variants, the A, B, C, and the counter-insurgency D models. Several other variants, such as the Fennec, were used in foreign service.

The T-28C, the subject of this kit, came out in 1955 and was the same as the B model except for the tail hook installed for carrier training and a slightly shorter prop. The T-28C had a Wright R-1820 engine and a three-bladed prop.