What's in the Huge Box

When I opened the box I was impressed with the numbers of sprues. At first glance it did not appear that this was going to be too difficult of a build. However, I later discovered that my assumption was incorrect. There are a lot of parts to put together, and you must be ready to devote some time into this model because it will take a while to complete. With that said, let's get on with the good stuff. Here is a breakdown of the items in the huge box.

Kit contents

• 20-Grey Sprues
• 4-DS Tires
• 1-Tow Cable
• Decals
• Instructions

(An interesting note. This kit has no photo etch parts. You will also have a ton of leftover parts in the kit which all look like the belong to the HEMTT. The question is why did Dragon not release the HEMMT with this kit?)

Quickbost has produced replacement parts for the Eduard 1/72 Fw-190 kits. The resin replacements are a simple drop-in for the kit’s plastic parts. The supplied items include two replacement ribs with finely detailed brace locks, which are not present on the kit parts. There is no modification required to the kit to use these details.

A side by side evaluation (see photos) indicates a replacement of superior detail that will provide a more accurate view should you have the occasion to closely inspect the underside of this exquisite kit. Note the additional detail on the locking mechanisms in the resin part over the kit’s parts.

Highly recommended.

Thanks to the IPMS Reviewer Corps and Quickboost for the opportunity to review this item.

If you’re like me, you hate masking canopies/windows. The advent of the canopy mask has made it possible for me to attempt many kits that I otherwise would never try due to large expanses of glass. But even in the case of kits with relatively limited glass, they certainly make life a lot easier.

Hauler Brengun is a Czechoslovakian model company that produces a whole series of accessories for their own kits such as resin detail parts, masks and oddly enough, replacement canopies for their own kits. The subject of this review is their set of masks for their Typhoon IB (car door) kit. Included are a set of masks for the canopy, masks for the wheel hubs and finally for the wing landing lights. They are made out of the same type material as Tamiya masking tape. They have a good level of tack, not too low or high, and can bend around curves if required. Let’s break this down to the three areas covered (pun intended)