Thanks to Ross at SAC for sending us improved metal landing gear for the new 1/72 Airfix Jet provost T.3, and thanks also to IPMS USA leadership for sending it to me.

Another of SAC’s expansive line of white metal upgrades to the basic kit plastic! The set consists of six parts: Two duplicate sets of main struts and nose gear for the kit.

Not much to say here; build your kit, leave off the kit gear, and install the SAC gear. Paint, add the painted wheels, paint the nose tire, and you are done.

You can see by the ‘before and after painting” pictures that I’m getting old and sloppy, but you get the idea. The nose gear has the anti-shimmy tire incorporated along with the gear, which makes it a better option because the kit gear has the tire split to account for the raised side portions of the anti-shimmy tire. It’s easier!

Thanks to Ross at SAC for sending us improved metal landing gear for the ICM/Special Hobby JU-88, and thanks also to IPMS USA leadership for sending it to me.

Another of SAC’s expansive line of white metal upgrades to the basic kit plastic! The set consists of 11 parts: Two main struts, one tail gear strut/retraction cylinder, wheel/tire assembly, six gear strut supports, and two engine supports for the kit.

The ICM kit contains two complete engine assemblies in addition to the basic kit. I used a set of replacement resin cowing and exhausts for the inaccurate kit cowl intakes, so I was not able to use the engine supports. I did, however, appreciate the strength provided by the metal gear after using the resin parts for the kit. With the thin nature of the gear axles in plastic, this would eventually be a failure point for the completed model. Not with SAC gear.

Packaged in a thin heat sealed pouches and one portion in a reinforced section with parts adhered to low tack tape. There are eight unique machined parts and a small photo etch (PE) fret. The duplicate photo etch parts may come in handy in case you mess up bending parts or you lose them. The PE is extremely thin, maybe twice the thickness of aluminum foil so take care. You will need to pick the parts up with tweezers and I was lucky the small parts did not fly across the hobby room.