Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Ben Morton
Published on
Company
Twobobs Aviation Graphics
Scale
1/32 1/48 1/72
MSRP
$14.00

Most aircraft scale models come with built-in color schemes. When modeling a WWII Japanese aircraft you are kinda expected to show up with either a green one or a light gray one. If you like to model Century series (F-104, F-106, etc.) fighters you're more or less stuck with a natural metal finish. And if you're a fan of the SR-71 Blackbird it is forbidden to paint it in any color other than black. Although, you might get away with a deep deep deep dark blue. Modern USAF aircraft (F-15, C-130, etc.) now come in any of color you like, as long as it's gray. Which is not to say that one doesn't have any options when it comes to choosing an optional paint scheme for your latest modeling project.

Review Author
Mark Costello
Published on
Company
Eduard
Scale
1/32
MSRP
$29.95

This set is designed for the Italeri 1/32 scale F-35A Lightning II kit. This set contains 2 sheets, one is pre-painted and the other is etched brass. Details are included for the seat and cockpit area of the jet. The instructions are the normal Eduard instructions with clear drawings showing where the PE parts go and what details need to be removed from the kit plastic parts.

The first step of the instructions covers the seat. There are details to add to the parachute housing and the controls on the side of the seat. You have to supply your own 1mm plastic rod (or equivalent) for the side of the parachute housing. This step also has you replace the kit PE rudder pedals with new ones that also add some detail to the rudder bar.

Review Author
Mark Costello
Published on
Company
Eduard
Scale
1/32
MSRP
$12.95

Although the canopy is not complex, it needs to be masked both inside and outside. The frame lines are faint in some areas and using the Eduard masks make the job much easier. There are 10 individual pieces for the inside of the canopy and 6 for the outside. All follow the frame lines, are easy to place and fit perfectly

The EOTS sensor cover on the bottom of the aircraft is also covered in the Eduard set. This piece has molded frames, but once again, they are inconsistent in how sharp they are molded. The pre-cut masks again fit perfectly and are easy to place.

Eduard also includes masks for the wheels so you can paint the tires in whatever black you want to use and then apply the mask and paint the wheels. Once again, these fit perfectly to the kit wheels. There is also a mask for the landing light.

Review Author
Mark Costello
Published on
Company
Eduard
Scale
1/32
MSRP
$7.95

This set is designed for the Italeri 1/32 scale F-35A Lightning II kit. This set contains 1 sheet of pre-painted, etched steel seatbelts and ejection pull handle. The instructions are the normal Eduard instructions with clear drawings showing where the PE parts go and what details need to be removed from the kit plastic parts.

Review Author
Alan Wickham
Published on
Company
Revell
Scale
1/25
MSRP
$29.95

The '66 Suburban is a modified tooling of Revell's '64-'66 Chevy pickup kits. The kit is nicely detailed, and complete, right down to separate lenses for all lights, interior mirror and dome, decal and "glass" for the instrument panel, and decals for the seat upholstery.

In this release of the kit, it can only be built stock, and no custom parts are included. Which was just fine for me, because I am an avid replica stock builder! I chose correct '66 Chevy truck light green and white for my model, with the correct light gold colored interior, and the correct greyish shade for the engine block.