Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Ben Morton
Published on
Company
MiniArt
Scale
1/35
MSRP
$11.99

One of the latest entries into MiniArt Models line of WWII Military Miniatures is a German Machine Guns set. There is enough styrene in the box to build two MG 34's, two MG 42's and one ZB 53.

The ZB 53 was a Czech design and were from captured stocks after the German Army invaded Czechoslovakia at the beginning of WWII. The Germans later changed the designation to MG 37. All of these weapons utilized 7.92x57 ammunition. Fun Fact: The MG 42, although redesigned and improved, is still in service as the MG 3.

Along with the machine guns there are parts for ammo cans, barrel canisters, and ammunition belts. MiniArt thoughtfully includes photoetch bits for the carrying straps/slings of each gun, handles for the ammo cans, and the cooling vanes/heat shields on the barrel of the ZB 53. All in all, you get 84 pieces of plastic and 38 photoetch bits. I found assembling those slings fiddly but on reflection a better in scale method eludes this author.

Review Author
David Wrinkle
Published on
Company
Eduard
Scale
1/32
MSRP
$165.00

This release from Eduard is part of a limited edition series of kits that, in addition to all the fine extras we’ve come to expect from Eduard, also includes a fantastic 3D metal printed plate of the same box art graphic. In the case of this fine P-40N release, the plastic is very familiar to many of us. The plastic in this kit comes directly from the Hasegawa Corporation. Additional features of the kit include the following items:

  • Resin main wheels
  • Resin tail wheel
  • Resin Exhaust stacks
  • Pre-coloured cockpit photoetch sheet
  • Additional photoetch sheet
  • Cartograph decals for five aircraft
  • Paint masks

There really isn’t much to say about the overall build of this fine model. A build of the Hasegawa P-40N plastic can be found here: P-40N Review. Personally, I found the fit and finish to be outstanding with only a couple of tiny build issues.

Review Author
Dave Morrissette
Published on
Company
Eduard
Scale
1/48
MSRP
$24.95

When Trumpeter announced they were releasing a 1/48 scale Type VII U-boat, many were amazed and skeptical. The kit would be huge and Trumpeter has had delays in the past. The U-boat has come out and I am pleased to say it is large and well detailed for a plastic kit with a full interior. One part of the kit is its 8.8cm deck gun and it’s nice. Eduard saw an opportunity for a great upgrade and issued a full resin and photoetch deck gun for the massive kit. This set consists of 38 excellent resin parts and a small photoetch fret of 22 small pieces. Casting is top notch- no air bubbles and the resin Eduard uses is tough and a little flexible which is excellent to handle.

Review Author
Dave Morrissette
Published on
Company
AOA Decals
Scale
1/32
MSRP
$11.50

AOA Decals continues their excellent releases focused on USN/USMC subject from the Vietnam war period with this release for the 1/32 Tamiya F-4J Phantom and representing a specific VMFA-334 Phantom, BuNo. 5565 with a call sign of “Lovebug” (and you gotta love that). The markings represent the Lovebug in Vietnam during 1960-69 and later in Japan 1969.

One thing that always stands out with AOA decals is the depth of their research. This scheme has been issued in the past but had some issues primarily with the falcon insignias and the modex numbers which are too small on previous releases. AOA is good enough to have a picture of the Lovebug on the cover and both markings look perfect. Also, there is information on adding fuel tanks as far as which pylon and markings, walkways and color call outs.

Book Author(s)
David Doyle; Color Art: Don Greer; Line Illustrations: Vincenzo Auletta
Review Author
Frank Landrus
Published on
Company
Squadron Signal Publications
MSRP
$19.95

David Doyle’s latest book continues to expand on Squadron Signal’s long-standing In Action series that initiated back in 1971. This is a completely updated and expanded edition over Squadron’s earlier Aircraft In Action number 55, a 50-pager on the Blackbird by Lou Drendel that was published in 1982. This 2017 release is essentially a new book, although it retains the identical Don Greer cover as In Action 55 monograph.