Installing slat armor

‘Buffalo’ 6x6 MPCV w/Slat Armor & Spaced Armor

Resin parts

German Heavy Tank VK 30.01(h)

Tracks

British Nuffield Assault Tank A.T.2

Sprues

M2A4 Light Tank

Photo 05

MD3 Ground Power Unit

Boulton Paul Defiant

Dornier Do 17z vs. Boulton Paul Defiant Mk 1

Instrument panel

De Havilland Mosquito FB Mk VI: The Build - Part 1

Tail

Avro Lancaster B.II

Parts Layout

Tom Daniel's "Cherry Bomb"

Front, Left view

B-26K Counter Invader with USAF Pilots & Ground Personnel

Previous Next

Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Product packaging

Mil Mi-8/Mi-17 Hip Landing Gear
Review Author
Floyd S. Werner Jr.
Published on
Company
Scale Aircraft Conversions
Scale
1/35
MSRP
$18.95

The Trumpeter helicopters are really nice kits but the kit’s white metal landing gear are very fragile. They are brittle and break apart. I’ve had this issue with the CH-47D and Mi-8 kit landing gear. Scale Aircraft Conversions offers a replacement set of white metal landing gear for the Hip.

This set includes nine white metal parts for the landing gear. They are direct replacements for the kit landing gear. They are packaged in a cardboard backed blister pack. The detail is nicely represented and should prove no problem for adding them to the kit.

They are not brittle like the kit parts. Some parts will need straightening as they got slightly bent during shipping.

These are a nice addition and stronger than the kit landing gear. These are a perfect replacement for the brittle kit white metal landing gear. This is another great release from Scale Aircraft Conversions. I hope that they make landing gear for the CH-47A and D.

Highly recommended

Product packaging

WGr.21 for Bf 109G-6
Review Author
Floyd S. Werner Jr.
Published on
Company
Eduard
Scale
1/48
MSRP
$14.95

The Tamiya Bf-109G-6 allows a lot of options. One option that isn’t included is the WGr-21 Rocket system. The mortar rockets were mounted under the wings of the Bf-109, from the G-2 to the G-6.

This set is packaged in a typical blister pack with 16 light grey resin and one photo-etch fret. The resin is molded in light grey and dark grey not that it matters as both styles are beautifully done. The weld mark on the tubes is awesome.

The fret is made up mostly of templates to first set the angle of support struts and second to then set its location on the wing. The assembly of the set is pretty straightforward once you get the templates made up. You get two separate rockets for your diorama and two rockets to be ‘installed’ in the tubes. The photo-etch parts for the rocket tubes are mostly for the rear of the rockets.

Contents

Bf-109G-6 Exhaust Stacks
Review Author
Floyd S. Werner Jr.
Published on
Company
Eduard
Scale
1/48
MSRP
$7.95

The Tamiya Bf-109G-6 has that beautiful engine that can be shown opened or closed. My question was they lead the world in engineering kits, can’t they hollow out the exhausts? Apparently not. So that is where this set comes in.

Eduard provides the answer. Packaged in the typical Brassin blister pack, Eduard provides you with some spectacular exhausts to replace the kit parts. Two light grey resin set of exhausts are included, as well as, a fret of photo-etch. They have beautiful weld lines and are hollowed out. They also are specifically designed for the Tamiya kit. The mounting points on the engine are sided and so are these beauties.

The photo-etch parts are for the deflectors and the front and rear deflectors.

The instructions are printed on a single sheet of double-sided paper.

Box Art

M4A3E8 Sherman
Review Author
Andrew Birkbeck
Published on
Company
Tamiya
Scale
1/48
MSRP
$30.00

Background

One can put up a legitimate argument that the M4 Sherman series of tanks was the most important Allied tank of the Second World War. The initial Shermans that rolled off the production lines in large numbers had what was known as VVSS (Vertical Volute Suspension System) with two road wheels per bogie. These tanks (M4, M4A1, M4A2, M4A3, M4A4) also operated as their main armament a short-barreled 75mm gun. As WW2 progressed, and reports from the fields of battle suggested the need for various “upgrades”, the Sherman series underwent a number of small and major changes. Late in the war, there were two major changes: the introduction of HVSS (Horizontal Volute Suspension System) which incorporated four road wheels per bogie for a better vehicle ride, together with a larger turret needed to house a larger 76mm main gun. The new designation for Shermans sporting these two major changes added “E8” to the end of the Sherman nomenclature.

Product packaging

IDF F-CK-1C/D Landing Gear
Review Author
Allan Murrell
Published on
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$16.95

This is a white metal landing gear set is to for the AFV Kit IDF F-CK-1C/D 1/48th Scale aircraft.

The white metal parts are good are have better-defined details than the original kit parts. They are a very good replacement for the already well details kit parts. The advantage is these white metal parts will provide more strength than the kit parts. The parts included replacing the parts E40, E11, E42, E36, E17, E15, E44, E13, and E46. I did expect to see replacements for E 34, E 37 and E33 but these were not included and it would have added more to this set.

The parts are well cast; you do need to sand off the few cast seams and metal pour points. The parts were a perfect fit to the existing mount and were easy to assemble. A couple of the metal parts were a little bent but very easy to correct.

I recommend these parts are a great addition to an already extremely well-detailed kit.