Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Damon Blair
Published on
Company
Brengun
Scale
1/48
MSRP
$16.50

The Lockheed C-130 is a versatile aircraft. In production since 1954, the C-130J is the latest in a long line of models. The landing gear was designed for rough field operations, with large, low pressure main landing gear tires and a pair of low-pressure nose wheel tires. The original brake design was for a single disk (like in a modern car) and has been upgraded to a multi-disk unit. The brakes look the same once mounted onto the gear’s axle.

The kit comes with 10 pieces molded in grey resin, and is meant for the 1/48 Testors/Italeri C-130 kit. There are many fine details with the castings. A nice touch is the “Goodyear” emblems and the valve stems and groove lines molded into the tires to represent the spaces between the treads. The only disappointment I found was with the brakes – I wish the back of the main landing gear tires was “hollow” so that the brake details would sit inside, just like on the real aircraft.

Review Author
Ben Morton
Published on
Company
Brengun
Scale
1/48
MSRP
$24.00

Attack Squadron from Poland had been producing some lovely resin kits and aftermarket items. Due to circumstances and the decision by their parent company (Arma Hobby) to get out of the resin business, their products started disappearing from the market place. Enter Brengun/Hauler and their check book. It would seem that Brengun/Hauler have purchased most, if not all, of Attack Squadron's molds and have been re-issuing those items ever sense.

One of these re-issued after-market offerings is a set of 1:48 scale resin replacement engine nacelles for Italeri's C-130 model. Theses replacement bits will allow you to build a Roll Royce engined C-130 J. Each nacelle comes as a outer shell with a separate front, spinner, and a small resin plug with two antennas and an exhaust deflector. These small bits have a pouring channel/bubble trap still attached so check your references and make sure you don't remove the wrong thing.

Review Author
Rob Booth
Published on
Company
Plusmodel
Scale
1/72
MSRP
$8.57

PlusModel was established in 1990 in the Czech Republic. Their product range is primarily made up of 1/35th scale resin kits, conversion sets, and accessories which are vacuum cast from polyurethane resin.

A new addition to their line is a set of resin wheels for the 1/72 Williams Brothers C-46 Commando kit. Each wheel is individually cast along with an outside hub cover, and a tail wheel, on casting blocks. The tires are appropriately flattened, but the tail wheel is independent of the support assembly. Some minor surgery of those kit parts will be necessary.

Review Author
Rob Booth
Published on
Company
Plusmodel
Scale
1/72
MSRP
$7.57

PlusModel was established in 1990 in the Czech Republic. Their product range is primarily made up of 1/35th scale resin kits, conversion sets, and accessories which are vacuum cast from polyurethane resin.

A new addition to their line is a set of resin props for the classic 1/72 Williams Brothers C-46 Commando kit. Each prop is a six-piece assembly of four individual blades, prop boss and hub cover which, when assembled, attach to the engine prop post.

Some years ago I spent many hours sanding down and re-scribing my classic C-46, assembling and painting to represent a Marine R5C-1. The starboard prop assembly fell victim to a nocturnal feline attach somewhere over the years, and I was looking to order a replacement set of B-26 four-bladed props, which were the closest thing I could find. About the time I had some time for the switch, this set from Plus Model Aero Line came available for review.

Review Author
Floyd S. Werner Jr.
Published on
Company
Fightertown Decals
Scale
1/48
MSRP
$25.00

Ok to start off, WOW! Now that I got that out of the way Fightertown Decals always produces great sheets with multiple marking options. This one is one of the best yet. This was previously released but this set has been adjusted to fit the Tamiya kit, as well as, any other F-14/F-18 kit, and this sheet even includes some new aircraft.

‘Top Gun’- the movie, has produced more dreams in the minds of little kids of my generation than any propaganda movie ever. I know I was in love with the high speed, low level flying and the good story. Okay so it wasn’t believable, but it was a good story. Anyhow the aircraft, especially the F-14, was the actual star of the movie. With the new Top Gun 2 being made currently the interest is sure to grow again, even if Maverick will be flying an F/A-18.