Hull Assembly

We left off last time with a big box of parts just waiting for the magic of modeling to happen to them. I’m happy to report that things are moving along. In this installment, we get to step 36 of 61 in the instructions. It seemed like a good place to report, since the masts and rigging begin in earnest after that, so you won’t have as open a view of the deck. Before any parts are cut lose and glue uncapped, you have to make some decisions about colors. The instructions list seven colors in the Testors range. The photos on the box show a pristine ship with an off white hull representing a lead-based antifouling coating used on war ships. Since this is (according to my story) a cargo ship turned pirate ship, I elected to show the lower hull in off-black or a pitch-based coating.

The Yak-38 Forger was the Soviet Union’s equivalent to the Harrier. Built to operate from the Kiev class Aircraft-Carrying Cruiser, the Forger provided limited air defense and anti-surface ship capability. Unlike the Harrier, which relied on a single engine to provide all of the vertical thrust, the Forger had two dedicated lift engines behind the pilot to assist with VTOL. The engines were covered with a large louvered door assembly. Whenever the aircraft was parked, this door was open and the louvers closed, as shown in the accompanying photo from a Soviet State Publication on the Navy. In flight, the door was closed and the louvers open, except during takeoff and landing when the door lifted to provide greater air flow.

Once again, Eduard steps up with an innovative photoetch accessory to add realism and context to 1/72 scale aircraft. In the tradition of their superb PE sets to go in and on aircraft kits, the growing series of prepainted PE flight deck and airfield operating surfaces adds this little beauty to its ranks.

Prepainted in natural wood flight deck color, this little gem provides a convincing and contrasting base to the blues of US Navy aircraft of the period. A few snips, and a tiny bit of filing or sanding, and the deck section is ready to mount to a firm base or slide underneath a favorite WW II Navy carrier plane. The only drawback is the small size, as larger aircraft like TBD Devastators, TBF/TBM Avengers, and SB2C Helldivers may seem to dwarf the piece – it seems better-suited for the smaller types like the F4F Wildcats, F6F Hellcats, and SBD Dauntlesses.