The March/April 2013 issue of Windsock Worldwide is the second issue of Volume 29, and the cover photo of a TVAL reproduction Sopwith Snipe foretells the main feature of this issue. The Snipe is the centerpiece, presented with an exclusive pictorial coverage that provides modelers with much, and supports subsequent product reviews of Wingnut Wings’ two new Sopwith Snipe kits. But, before getting to the Snipe, this issue is packed with a wealth of relevant news and other features.

The first regular column; the READER’S GALLERY, presents photo coverage of four highly detailed models ranging from a static 1/72 scale model to a 1/6 scale flying model. Then, following a brief Front Line News column, there is a RARA AVIS covering a one-of-a-kind Swedish Friedrichshafen G.IIIA. Lance Krieg then brings Chapter Eight of his valuable WWI Modeling Master Class to closure with two pages devoted to “Concluding The Chapters on Adding Extra Detail to WWI Models.”

Quickboost now offers model builders an aftermarket detail set that replaces the wing gun barrels and pitot tube found in Tamiya’s 1/72 A6M5 kit. The parts provide a higher level of detail and accuracy, and the gun barrels are molded with open ends. The parts are designed simply to drop-in, in place of the kit part, and provide better detail.

The parts are molded in Quickboost’s familiar resin on a small casting block with protective bars on the ends. The quality of the molding is quite flawless, with no bubbles, pinholes, or flash to deal with. A sharp #11 X-Acto blade or razor saw blade is the only tool needed to remove the parts from the casting block, and a quick swipe with a sanding stick can dress up the cut, if necessary. Because they are resin, they must be anchored with superglue or epoxy cement.

These detail parts will be a very nice addition to the 1/72 scale Tamiya 1/72 A6M5 kit. This set is highly recommended.

Quickboost has produced a set of resin gun barrels to replace the nose armament for the Eduard Bf-110E kit. The only real differences between the kit and replacement parts are that the resin part is one piece, whereas the kit parts need to be glued together, and the gun barrels are drilled out, allowing for more realism. Once installed, the gun barrels are barely visible, although the drilled out muzzles do stand out, and the parts are so small that drilling them out could be a bit tedious at best.

This is a nice little addition to what is already an excellent kit. Recommended. My thanks to Quickboost and to IPMS/USA for the opportunity to review these items.