Master Model is a company that makes turned brass aftermarket parts, specifically pitot tubes, refueling probes, and antennas.

The first thing I would like to point out is how good the packaging and instruction sheet is. The packaging consists of a zip-lock type bag, while the part is in a smaller bag, keeping it from moving all over. The instruction sheet is very clear and easy to understand, only needing 3 steps. Cut off original part, drill a hole (0.8 mm), glue in the new metal part – complete. Just be careful drilling the hole, especially in 1/72.

When compared to the kit part – there is no comparison. The kit pitot tube looks like a little blob of plastic, while the Master Model part is a complete work of art. Once you use a couple of these pieces you will be completely spoiled and never want to use the kit pitot tubes again.

This kit is basically a slightly upgraded re-box (reboot) of their Premium Edition Kit 6317 that came out in 2008. The new parts are two photo etched tool boxes instead of one, a newly designed photo etched tool box to fit on the rear of the fighting compartment, different Magic Tracks specifically for the Kursk campaign, and a new set of decals that are supposed to allow you to build any vehicle that served with the s.Pz.Jg.Abt.653 or s.Pz.Jg.Abt.653 units at Kursk.

This is a multimedia kit comprised of 270+ styrene parts, magic tracks in the early pattern, three photo etched frets, a turned aluminum gun tube, decals, and the set of instructions that need to be reviewed very carefully before gluing any parts together. Most Dragon models today are a collection of old sprues with new sprues added to create a new kit variant, and Dragon has done so with this kit.

I happen to love F-86s in any shape or form, and the “D” is one of my favorites. I have built a few in the past in most scales and welcomed this one by Hasegawa in 1/72 as I never built one in this scale.

With this kit, Hasegawa chose to do it in the unusual “Shark Mouth” markings. This is a pleasant change from the usual marking as seen on most “D” models.

Upon opening the box, I was greeted with the usual Hasegawa silver plastic in four sprues, plus a clear one. The moldings were crisp with engraved panel lines. I had looked at an older kit of the “D” by Hasegawa and it seems to be the same kit, only with new decals.

Assembly was straightforward with no fit problems. The wings went on without the need of filler. One must remember to add a weight to the nose to prevent tail dragging. The cockpit was very nice; however, I think that seat harnesses could have been molded to the seat for a better look. I added some from tape.

I recently built the Hasegawa 1/32 scale Bf-109 F4 “Jabo” version. This was a great kit to build. In fact, if by some miracle I win the lottery or find a decently paying job, I actually plan on picking another one up.

The decal sheet gives you three versions to build: Oberleutnant Frank Liesendahl from 10 Jabo /JG2, Unteroffizier Felix Sauer from 10 Jabo /JG53, and Oberleutnant Werner Langemann, 10 Jabo /JG53. Unlike the Hellcat I reviewed a short while ago , the decals for this kit were crisp, clean, and really well done. The white is a clean, bright white, and the Blue 1 I plan on using for Liesendahl’s aircraft looks like it will stand out when applied.

The iconic Sd.Kfz.231 has joined the fleet of Dragon’s 1/72 German vehicles from World War Two. Like its cousin, the 231 served in every theater of action. With dual driving positions, it served the Wehrmacht until 1943 when the production run came to end. The kit has five sprues and the two halves of the vehicle each molded separately, for a total of 93 parts. There is a small decal sheet and color schemes for five vehicles. The quality of the molding is very good. The sprues were loose in the box, though each sprue is individually bagged. Despite being knocked around during shipping, none of the pieces were damaged or separated from the sprue.