What's New

Review Author
Perry Downen
Published on
Company
Brengun
Scale
1/144
MSRP
$6.03

Thanks to Hauler-Brengun for providing this item for review and thanks to IPMS/USA for allowing me to review it.

What started out as an airliner with a market forecast of 250 units ended up being one of the best-selling and most popular airliners in the world. The Boeing 727 entered service in 1964 and the last 727 was completed in 1984. During that time 1,832 727s were built. It was very popular with both domestic and foreign airlines alike because of its range, short runway capabilities, and versatility. It could carry up to 189 passenger. One of its passengers made the 727 an unforgettable piece of American history. A man dubbed “D. B. Cooper” jumped from a Northwestern 727 with $200,000 in ransom, and into the history books as well as oblivion.

Review Author
Hub Plott
Published on
Company
Scale Aircraft Conversions
Scale
1/48
MSRP
$16.95

Scale Aircraft Conversions’ 1/48 Gloster Javelin landing gear set is a full replacement in white metal for both main gear legs and the nose gear. In many cases SAC will assemble some of the kit parts prior to casting; however, in this case they have cast the parts individually. Additionally, they have also cleaned up the gear and filled the sinkholes that were present on the original plastic parts.

The main gear consists of four parts for each side: a main gear leg, two retraction arms and compression scissors. The nose gear consists of the gear leg with one side wheel-cover, the opposite side wheel-cover and a retraction arm.

Detail is crisper on the metal gear than on the kit’s plastic parts. The replacement parts are a drop fit with no issues what so ever. The replacement for kit part G21 needs to be threaded through an opening in the existing kit parts, but if you take your time and do this carefully you should have no problems.

Review Author
Steve Coats
Published on
Company
Airfix
Scale
1/72
MSRP
$9.49

This is my first review for IPMS, and it involves one of my favorite kit manufacturers, Airfix. Like many folks my age, I built Airfix kits as a youngster and have been impressed with the quality of newly tooled kits they are currently releasing. To begin, I love the box art for this kit. It shows an action scene with the plane flying over some Russian tanks, but more importantly it provides reference material for painting the scheme shown on the box, which is the scheme I chose to paint on the model.

Review Author
Mike Van Schoonhoven
Published on
Company
MiniArt
Scale
1/35
MSRP
$18.75

MiniArt is a Ukraine company that was established in 2001 and released their first kit in 2003. They are well known for their Diorama series, but the have released many armored vehicles, figure sets and accessory sets over the past several years.

This figure set comes in a end opening cardboard box. The instructions for assembling the figures is on the rear of the box. The kit comes with two sprues and these contain the five figures and equipment for them.

The figures are molded in a light grey plastic. There is just a slight amount of flash on the parts, with the biggest issue being the clean up of mold lines. The figures are pretty well detailed, just be careful in your clean up of the mold lines as you might lose some details. Painting instructions and paints are called out on the rear of the box. They list several different paint manufacturers.

Review Author
Brian R. Baker
Published on
Company
Airfix
Scale
1/72
MSRP
$7.99

History

Sir Geoffrey DeHavilland began designing airplanes before World War I, and although his first effort, the No. 1 Biplane of 1909, crashed on its first flight, his subsequent designs all made up for his initial failure, and he went on to become one of the world’s foremost aircraft designers. His most famous product during World War I, the Airco DH-4 and later variants, became a mainstay in both military and civil aviation after the war, and by the mid twenties, his new company, DeHavilland Aircraft, was producing substantial numbers of the DH-60 Moth, a light biplane designed for training and touring. This was an open cockpit tandem type powered by a variety of engines, some designed in DeHavilland’s shops, and it served to establish DeHavilland’s reputation for producing light, economical, safe, and efficient training airplanes for civil use.

Review Author
Al LaFleche
Published on
Company
Spades Models
Scale
1/16 (120MM)
MSRP
$100.00

First thanks to Spade Models for the sample and the excellent customer support they provided and to Dick and Dave for offering me the opportunity to review this kit.

Packing

The kit arrived in a generic looking corrugated cardboard box with the company name on it. Opening that revealed a full color kit specific box of glossy cardstock. There are three pictures of the assembled and painted kit and the “back” has a brief history of Seal Team Six. This box is sealed with “QC Tape” top and bottom. Opening this reveals a plastic bag surrounding a plastic container box. This was so well designed, I had to look closely how to open it…It slides open. In here are two tightly fitted foam pads holding 6 zip lock bags, a 16 page hull color booklet, and a tightly sealed cellophane container for the decals.

Review Author
Walt Fink
Published on
Company
Roden
Scale Aircraft Conversions
Scale
1/144
MSRP
$35.99

Originally developed as an intermediate-range version of Boeing’s highly successful 707, the 720’s fuselage was shorter by 7 feet 9 inches. A reduced fuel capacity enabled a lighter structure, and with aerodynamic improvements in the form of full-span leading-edge flaps, the aircraft was actually a bit more operationally versatile than the 707, except in range. With an original designation of 707-020, the aircraft was externally similar to the 707-120, so in order to eliminate confusion, Boeing renamed it the 720, and it stands as the only airliner in the “Seven Series” not to end with the numeral seven. Demand for the reduced-capacity aircraft was lukewarm at best, so Boeing only produced 154 720’s (and the improved follow-on 720B’s). The mainstream model manufacturers have largely ignored the type. Roden’s Boeing 720 is a welcome addition to the 1/144 scale airliner enthusiasts’ collections because it fills a void.

Review Author
Mike Van Schoonhoven
Published on
Company
Model Art
MSRP
$11.27

Model Art Magazine is a monthly magazine that covers aircraft, armor, ships and car modeling. Model Art started releasing magazines in 1966 and has evolved from there over the past forty six years.

Each issue of Model Art consists of a multitude of articles that reach out to all genres of modelers. From what I see, Model Art makes small changes to there format to keep each issue up to date and interesting to the reader.

This issue starts off with two short articles. The first being "MA New Item Special" and a diorama that takes place during the U.S. operation in Grenada featuring the new Tamiya Gamma Goat.

Book Author(s)
John Anderson and Richard Passman
Review Author
Ben Guenther
Published on
Company
Zenith Press
MSRP
$30.00

Much has been written about the world's most successful rocket powered research aircraft, the X-15. This airplane was designed to be a vehicle to provide aerodynamic, flight dynamic and structural data for use in the future development of hypersonic aircraft, all before anyone had even broken Mach 3. In October, 1954, NACA decided on the need for a manned hypersonic research vehicle, one that would fly up to Mach 7 and over 126,000 feet in altitude. By the end of the program the X-15 had reached a top speed of Mach 6.7 and an altitude of 347,800 feet during the course of 199 flights.

The authors; John Anderson, curator of aerodynamics at the Smithsonian National Air and Space Museum and Richard Passman, chief aerodynamicist on the Bell X-2 have crafted an excellent introductory story for this aircraft.

Basically, they do this by explaining the X-15 and how it worked, then going into details of the twelve pilots who flew this machine. The six chapters are:

Review Author
Rod Lees
Published on
Company
Master Model
Scale
1/48
MSRP
$4.50

Another in a long line of excellent turned metal (brass) items from Master Model. IPMS/USA sincerely appreciates the Master Model’s support in providing a world-class product to improve our models… THANK YOU!

I am always fascinated by the level of detail these parts have on them. My only experience with turning metal is best left unsaid, however these probes are almost as close to perfect as they can be.

This package contains two metal parts in a double-bag system. The outer bag holds the protective card with details on the contents, and then an internal “small” bag holds the even smaller pitot and AOA (Angle of Attack) probes.