What's New

Review Author
Dick Montgomery
Published on
Company
Hasegawa
Scale
1/12
MSRP
$16.50

Another in a series of Hasegawa kits replicating office and school furniture, this Science Room Desk and Chairs kit requires a little more time and effort to construction than the previously reviewed Conference Table and Chairs (62002) or School Desk and Chair (62001) kits. The science table and four chairs that are found in the kit took about 30 minutes to build.

The table surface is black, while the table, itself, is white. The stools are a tan color. Hasegawa advertises that this kit does not require glue, and I found that to be true, for the most part. I did fudge a bit and reinforced the “snap” fit of the table parts with a little glue. I also glued the water handles onto the faucet fitting.

Assembly is easy enough for a novice or young person to handle by themselves, so if Junior is looking for a diorama setting for a science experiment, this is it!

Thanks to Hobbico and Hasegawa for providing this review sample to IPMS/USA.

Review Author
Andrew Birkbeck
Published on
Company
Value Gear
Scale
1/48
MSRP
$11.50

This review covers the following Value Gear Universal/Generic Stowage Sets:

  • 1/35 scale Wooden Crates Set #1 - $11.50
  • 1/35 scale Tents & Tarps Set #3 - $11.50
  • 1/48 scale Crates Set #1 - $11.50
  • 1/48 scale Tents, Tarps & Crates Set #3 - $11.50

Judging by the blurb on their web site, Value Gear is run by an American expat who moved to Ireland for a quieter, less-stressed life. He is an “at home Dad” by day, and a resin accessory producer by night, which doesn’t sound like a half-bad way to live!

Value Gear’s products are generic, in that they are appropriate for any army, since they are a series of rolled up tarps, tents, and other canvas items, along with generic wooden crates. Thus they are equally at home on a WW1 French Army FT-17, a 1944 German FT-17, a Canadian Korean War Sherman, or the back of an Opel Blitz in Poland, 1939.

Review Author
Bill O'Malley
Published on
Company
Hauler
Scale
1/35
MSRP
$25.91

Renault FT-17 TSF Background

This Hauler conversion kit for MENG's 1/35 scale French FT-17 Light Tank (Cast Turret) kit, #TS-008, modifies it into a Renault FT-17 TSF Command Radio version.

The Renault Char signal, or TSF (télégraphie sans fil - wireless, in English), is a command tank with a radio. The FT-17 turret was replaced by a box-like superstructure, giving room for a crew of three: driver, radio operator and observer. The vehicle was equipped with a code-only wireless radio, and featured a wire antenna hung between a mast mounted on the superstructure and the vehicle’s tail. They were unarmed, used for coordinating assaults, and keeping contact with high command while deep behind enemy lines. During WWI, 188 TSFs were produced.

Review Author
Roger Rasor
Published on
Company
A.M.D.G. Decals
Scale
1/48
MSRP
$16.95

This is the fourth in a quartet of 1/48 scale P-51 decal sets recently released by A.M.D.G. Decals. As I noted in my review of their first set of P-51 decals, A.M.D.G. Decals is a new company from Poland that markets these sets under the title YANKEE MERLIN ROARS!!! (Parts I – IV), and they provide everything needed in each set to finish four different aircraft. The decal sheet included in each set is packed with about as many individual decals as anyone could hope for (as shown in the photo below).

This set (Part IV - #A48-004) of YANKEE MERLIN ROARS!!! provides markings for the following:

Review Author
Scott Hollingshead
Published on
Company
Brengun
Scale
1/144
MSRP
$5.86

Hauler-Brengun, a Czechoslovakian newcomer, provides modelers with kits, photoetch parts, and accessories. The vacuum-formed canopy that I received for this review is a nice two-piece replacement for the single-piece canopy included with the Dragon F/A-18F kits. Before diving into the review, I should state that I would recommend vacuum formed parts for experienced modelers. Removing the part from the plastic sheet is a delicate process, but the results are worth the effort.

The F/A-18F is the two-seat variant of the Super Hornet that, along with the single-seat F/A-18E, replaced the capable F-14 Tomcats aboard the US Navy’s aircraft carriers. The more petite, slower, shorter-range and smaller-payload-carrying Super Hornet is at least a less expensive aircraft for the Navy to operate. Okay, so I really am a Tomcat fan at heart.

Review Author
Mike Van Schoonhoven
Published on
Company
Model Art
MSRP
$11.65

Model Art Modeling Magazine is a monthly magazine that covers aircraft, armor, ships and car modeling. Model Art started releasing magazines in 1966 and has evolved from there over the past forty six years.

Each issue of Model Art consists of a multitude of articles that reach out to all genres of modelers. From what I see, Model Art makes small changes to its format to keep each issue up to date and interesting to the reader.

Book Author(s)
Donald Nijboer
Review Author
Dick Montgomery
Published on
Company
Osprey Publishing
MSRP
$18.95

Written by Donald Nijboer and illustrated by Jim Laurier and Gareth Hector, Spitfire V vs C.202 Folgore: Malta 1942 from Osprey Publishing covers what is generally considered to be the best fighters for their respective air forces: the Spitfire Mk. V and the C.202 Folgore. This 60th book in the Duel series provides extensive accounts of the clash between these two classic World War II aircraft in the skies above Malta in 1942

Tracing the lineage of both aircraft back to the Schneider Trophy S 6B and MC 72, the book lays out the technical issues that went on to make the Spitfire Mk V and the C.202 such outstanding fighter aircraft. Moving forward to the war years, the author sets the stage for the massive dual that saw these two aircraft meet over Malta. To quote the author, “The history of these two fighters will forever be linked with the savage air battles that took place over the skies of Malta in 1942.”

Review Author
Chris Smith
Published on
Company
PJ Production
Scale
1/72
MSRP
$41.00

Introduction

The Mirage III’s history has been well covered in numerous other places, so I won’t dwell on it. Suffice it to say, it was introduced into service in 1961 and proved its worth in the hands of the Israeli Air Force in the 1967 Six-Day War and the 1973 Yom Kipper War. It’s been used by 20 of the world’s air forces, and it is, quite frankly, one of the most elegant fighters ever designed.

Review Author
Jim Pearsall
Published on
Company
Eduard
Scale
1/144
MSRP
$19.95

This is another of the marvelous Eduard 1/144 kits. Previously I’ve done the Spitfire IX, both c and e wings, the MiG-21s (all three) and the Ju-52 military. All have been nicely crafted, with good fit and interesting markings. This one is no exception.

The Aircraft

By early 1943 the Luftwaffe no longer held air superiority over the Soviet Union, at least not sufficient superiority to prevent Russian fighters from interfering with dive-bomber operations. The Stuka Geschwaders lost eight of their Knight’s Cross Holders during the battles around Kursk. The Stukas were generally replaced by FW-190s and Bf-109s in the ground attack role.

The RLM (German Air Ministry) was also worried about the vast numbers of enemy tanks on the Eastern Front, and wanted an effective way to stop armored offensives. The Henschel Hs-129 was a potent anti-tank weapon, but its twin-engine design and large fuel tanks reduced its’ ability to survive ground fire.

Review Author
Dick Montgomery
Published on
Company
Hasegawa
Scale
1/12
MSRP
$16.50

One in a series of kits featuring “office furniture” and “school furniture”, this kit is rather easy to assemble, goes together very well, and provides a bit of fun. The kit provides pieces for three school desks and chairs. There is nothing difficult about this kit and I found myself chuckling out loud, as I did building Hase’s 62002 Office Furniture Tables and Chairs. Total build time was about 7 minutes.

Hasegawa advertises that this kit does not require glue, and I found that to be true. I took the time remove the nubs after removing the parts from the sprues, but that was more out of habit than necessity.

One gets parts sufficient for three chairs and three desks. The fit is excellent and assembly is very quick and easy. The table surfaces are “brown” as are the seats and chair backs. The tubing for the chairs and tables is gray.