Thanks to Eduard/Brassin for providing more of their excellent aftermarket parts for IPMS USA to review, and to IPMS leadership for sending it my way.

This is another simple upgrade to the Eduard “brassin” line… Wheels and tires for the Airfix new-mold spitfire Mk 1.

Why new wheels and tires? The wheels have deeper, more defined detail than the kit items, and the tires have the manufacturer’s name and the rib around the smooth treat circumference. On with the review..

First: Primer the parts. I use duplicolor flat black for this; (it’s a tire, huh?) once cured and dry, masked the back side of the tires with the excellent kabuki paper masks… and a bit of tape around the rest of the tire so I wouldn’t have to paint the whole thing over again. Leaving the brake assembly open for spray painting, I also placed the wheel fronts (spoked) next to the tires, and hit them all with Tamiya flat aluminum spray.

Bottom Line

Eduard has produced a single fret of finely detailed, finely scaled brass photoetch parts specific to the 1/700 scale Revell 05099 DKM Tirpitz injection-molded, polystyrene model. Highly recommended for this kit.

What You Get

A single, medium-sized, brass photoetch fret of railings, C30 20mm single guns, some masts and spars, multipart cable reels, catapult, aircraft props, radars, searchlight covers, ladders, ladder rails, pulleys, cranes, funnel grate, air intake grates and other parts to super-detail Revell’s 1/700 Tirpitz. Separate detail parts are numbered, with 116 different parts numbered on the fret, and 147 overall counting duplicates. Metal is intermediate in thickness and strength compared to other photoetch companies, which I prefer for handling and folding (the Goldilocks Syndrome – just right).

Thanks to Eduard for providing more of their excellent aftermarket parts for IPMS USA to review, and to IPMS leadership for sending it my way.

This set improves on the fine detail of several exterior areas: the radiator and oil cooler; the landing gear; the wheel wells; the gun doors; and the rudder actuator arm.

Begin with the Radiator and oil cooler. This modification requires you to sand off the detail on the intake and outlet bulkheads on the radiator and the oil cooler, and then you can attach the Eduard parts. These fit perfectly. Then you install a 1/32” wide mount plate and probe for the temperature sensor for the radiator. This change will try your patience, but I did it, so you should be able to as well. Then put the radiator and oil cooler fairings on the wing and you are done with them.

The Products

This set provides the following:

• CX414 - Die Cut Flexible Mask for Airfix Defiant Mk. I kit.
• 73525 - Self and Non-Adhesive Photo Etch Detail Set for Airfix Defiant Mk. I
• 72600 - Defiant Mk. I Landing Flaps

Flexible Masks Set (CX414)

This small yellow sheet of masking paper is die cut to provide masks for the window areas on the canopy and turret of the Airfix Defiant Mk. 1. This is worth getting on its own, as it is totally accurate and really cuts down on the tedious job of masking the clear areas on the model. Very clear instructions are given, so there’s no way of messing these up unless you really are a Neanderthal, and in that case, you should probably take up crocheting. I merely removed the little shapes with my pointy tweezers, and transferred them to their proper locations. Highly recommended.

Krisztine Bodi is a European figure sculptor of some renown who started his professional career producing masters for the likes of Alpine, Young Miniatures and Mantis. As so often happens, Mr. Bodi eventually decided that working for himself might be the smart thing to do, so he set up his own line of figures under the brand name “the bodi”. The range now numbers nearly 100 figures in various scales, most covering the period of the Second World War.

My approach to reviewing these two figures sets (3 figures total) this time around is to provide you with photos taken by myself of the unpainted resin pieces, together with photos borrowed from the producer’s web site. This is because these beautiful sculptures deserve better than my almost non-existent figure painting skills have to offer. I want folks to see the quality of the resin parts, but also see what a good figure painter can then do with them.