For ship modelers, specifically aircraft carrier enthusiasts, with an interest in post-WW2 Essex-class ships, Starfighter Decals has released a two-sheet set to improve your models. The set provides decals for use on 17 of the Essex-class carriers as well as for the three Midway-class carriers. In addition to the flight deck and hull numbers, flight deck stripes, elevator safety lines, island safety reminders, and ship names are provided. The sheets measure approximately five inches by eight inches (126mm by 200mm) and are printed by Microscale.
What's New
During the early months of 1942, there was much pressure on the Western Allies – especially from the Russians - to ‘do something – anything!’ to relieve the unrelenting bad news on all fronts. The British were struggling in North Africa and the Far East, Japan was running roughshod over the US in the Pacific while the Canadian Government was under pressure at home. The result of these pressures was to lead to one of the most ill-conceived operations of WWII – Operation Jubilee, the raid on the northern French port of Dieppe, which had been heavily fortified by the occupying German armed forces. The resulting operation in August 1942 was an unmitigated disaster, costing the lives of thousands of Canadian and British troops, sailors and airmen with very little to show.
This book is the 28th in MMP’s Spotlight On series, and consists of 23 full-color plates showing 23 different famous P-51 Mustang fighters, splendidly depicted by Polish aviation artist, Tomasz Kaca. Each plate shows the aircraft in question in the air above a variety of landscapes and featuring various WWII theatres. Each plate is accompanied by a short caption naming the aircraft and its identity, the pilot and his unit. There are no other words in the book, not even an introduction.
While the plates are splendidly rendered, I have two issues with the book. Firstly, the plates are split across the spine of the book and while it is easy enough to ‘break’ the spine so it lays flat, it does rather spoil the effect. Perhaps this type of book is better served by a landscape format rather than portrait.
The Kokusai Ta-Go is an obscure late World War II aircraft designed by Captain Yoshiyuka Mizuyama of the Imperial Japanese Army as an inexpensive kamikaze aircraft to be used in the Allied invasion of Japan. The Tachikawa Aircraft Company wasn’t interested as they were already overwhelmed with their production requirements. Undeterred, Captain Yoshiyuka Mizuyama built the prototype with volunteers. The original armament was a single 500kg bomb fixed to the aircraft (it couldn’t be dropped and it was designed for a single operation). The aircraft was destroyed in a bombing raid. The Captain then approached the Kokusai Corporation who expressed interest, but wanted it cheaper and lighter. Now vastly underpowered (the aircraft had a wingspan of 8.9m and was 7.4m long, powered by an inline, air-cooled four-cylinder engine producing 110hp), the aircraft could only carry a single 100lb bomb.
The AN-M30A1 was a World War Two era general purpose (GP) 100-pound bomb that entered service in 1942. The AN-M30A1 was a slightly modified AN-M30 US Army developed bomb, differing in the base plug/plate construction, and the use of a different adapter-booster. The bomb served the US for about 20 years.
From the Bulletpicker website
These bombs are all general purpose high explosive bombs.
To overcome the erratic flight of these bombs when dropped from high altitudes by very heavy bombers, the tail assembly of the 260 pound Fragmentation Bomb M81 replaces the customary tail unit, which is two inches shorter, for such missions. Use of the Cluster Adapter M22 permits single suspension for four GP Bombs AN-M30 or AN-M30A1.
Bottom Line Up Front
This reboot of the Panda Hobby Pz38(t) kit in 1/16 scale is a mixed bag. The full interior provides some exciting possibilities, but the kit is marred by some very sub-par engineering. This kit has a lot of nice features, but it really fights you in some places. It can be made into an award-winning model, but it will take patience, skill, and lots of coins for the swear jar.
I built this review as a ‘naked build’ so you can see all the features of the kit unobscured by filling, sanding, painting, or weathering.
Volume 25 of this series is dedicated to the Panzerwaffe and its many variants/types. The Panzerwaffe ordered 54,147 vehicles/AFVs in 126 versions on 28 different chassis. The book gives you a small representation of the vehicles/AFV built by the Germans during WWII. Although it is true that the German vehicles/AFV were top of the art in their time, they could not compete against the sheer quantity of Allied war production. That being said, the Germans, although under a tremendous amount of pressure due to fighting against superior numbers, still made good use of the equipment provided to them. The German Panzerwaffe defeated Allied opponents in many cases through superior training, tactics and not infrequently, by sheer bravado of their troops.
Italeri has re-released its Hurricane Mk.IIC in 1/48 scale. The original release was from the early 2010’s and included a Hurricane Mk.I, Mk.I/Trop, Sea Hurricane Mk.I and Hurricane Mk.IIC. Inspecting at the parts (the photoetch sheet) you must wonder if at some point there the plan was to include a Mk.IIB in the family but to my knowledge it has never been released. Based on the engineering of the wing, you can probably model a MkIID and, if you get a replacement oil housing probably a Mk.IV as well, assuming you know your way around the Hawker Hurricane (there are plenty of online references).
Two Bobs has released a decal sheet covering an anniversary scheme for the 309th Fighter Squadron “Wild Ducks” back when it was flying the F-16 C/D.
Two paint schemes are provided in this sheet. The first one is a striking mix of blue, grey and white strips with Donald Duck holding a lightning bolt on the blue rudder. The second one is a great looking desert camouflage for the first F-16 to claim a kill on an Iraqi Mig-25 with an AIM-120 (although at the time of the kill the airframe was wearing the standard two-grey livery).
I want to point out that both schemes are special commemorative schemes for the 80th anniversary of the 309th FS. Both schemes were designed by Ssgt Michael Cichonsky (portrayed in the instructions sitting on the tail of the F-16C) and both look amazing.
The decal sheet includes all stencils needed for both aircraft, meaning one sheet allows you to build both the -C and the -D. You don’t even have to choose which one to build!
Illiad Design continues to expand its line of 1/48 scale decals, this time with a set of markings for the Avro Anson. The decals were designed for the recent Airfix model
This decal sheet covers 6 airframes from the BCATP (British Commonwealth Air Training Plan). All markings cover airframes that saw service in Canada: Manitoba, Ontario and Saskatchewan.
Some of the airframes are in camouflage of Dark Earth and Dark Green with lowers in Sky, plus some high visibility markings in yellow, others are fully painted in yellow and there is everything in between (yellow bottom and camouflaged tops, yellow bottoms, and partially camouflaged tops, etc).
