If, as a builder, you are interested in nostalgia, or are fascinated by early organized drag racing, then Revell has come through for you with the re-release of this classic Tony Nancy set of dragsters. First released in 1963, and with the date still showing up in the moldings, this kit represents the dragster and roadster that won the Competition Eliminator (the ’23 “T” Roadster) and Best Engineered Car (the Dragster) awards at the Winternationals in 1963. Tony Nancy, whose nickname was "The Loner" based on his ability to practically field a car by himself, set at least one record or Drag News 1320 mark in every class in which he competed, which encompassed cars such as a V/Fuel Dragster in 1957 through Top Fuel, where he held the national speed record at 236.22 in 1971. He was well known both for his seahorse emblem and for his upholstery business which served many Hollywood stars (such as Steve McQueen and Clint Eastwood), and working on boats and a variety of automobiles.
What's New
History
The IT-1 tank was a Soviet cold war missile tank based on the T-62 Hull. The tank was specially designed to carry and fire the 3M7 Drakon missile from a pop-up launcher. It saw limited service from 1968 to 1970. It was withdrawn due to the limited ammo it could carry and the large dead zone around the tank caused by the minimum range of the missile. Most were converted into recovery vehicles.
The Kit
The contents of the kit are nicely boxed and individually wrapped in plastic sealed bags. There are 19 sprues, 1 clear sprue, 1 PE fret, and the lower hull section. The instruction are in booklet form with 12 pages of black and white instructions. A separate color painting guide is also included. No decals come with the kit and there are no instructions to guide you as to where they might have gone.
These two piece exhausts are perfectly molded in light grey resin with six very thin exhaust stacks. There isn’t a lot to say in a review about these pieces. They are perfectly cast, drop in replacements for the kit parts and hollowed out to perfection. I know I could never hollow them out as good as Quickboost without ruining most of the tubes. So for that reason alone these are a great investment.
The packaging doesn’t say it but I’m sure you could make these fit your Hobbycraft or Hawk kit as well.
Highly recommended.
Thanks to Aires and IPMS/USA for the review copy. You can obtain yours by contacting www.modelchoice.net or your local hobby shop or online retailer.
With the release of the Encore (upgraded Monogram) A-37 there is renewed interest in this little dragonfly. The kit is really nice, despite its age.
Perfectly molded in light grey resin these two gun barrels have the shrouded miniguns inside of thinned fairings. The addition of these little jewels will add to the look and aid you from having to clean up a seam on the shroud. This will ensure the shroud is round. You’ll also have hollowed out gun tubes inside of the shroud.
Highly recommended.
Thanks to Aires and IPMS/USA for the review copy. You can obtain yours by contacting www.modelchoice.net or your local hobby shop or online retailer.
This book is, as the title implies, the story of Adolph “Sailor” Malan. From the imprint information, this appears to have originally been released in 1980, but this particular edition was published in 2011.
While this is not a research/reference type of book per se, it is a good read for anyone interested in one of the RAF’s premier pilots during WW2. It is nice to take a break from the mechanics of line drawings, measurements, paint schemes, and the like, and delve into some of the human personalities involved in the conflict from which many of us model machines.
This book very briefly covers Malan’s time growing up in South Africa, and his time as a naval cadet and subsequent 8 years at sea. (This would be the source of the “Sailor” moniker). It then quickly moves into his transition to the RAF, completing his training in 1937 and being posted to 74 Squadron.
This Beaufighter decal set is one of the latest from Canadian-based Aviaeology – SkyGrid Studio’s line of model-related products.
Upon first opening up the standard ziplock plastic bag that holds the decals and instructions, I was immediately impressed with the quality of the decals. There are 4 sheets included in this set, covering 4 aircraft (3 of which have multiple variations). In addition to the individual aircraft markings, a full set of national markings and stencil data is provided for one aircraft. These decals look first-rate, with little to no carrier film except where absolutely necessary. The decals themselves have a glossy finish and appear quite thin, but with good color density.
Although I must admit that my all-time favorite aircraft will always be the Grumman F-14 Tomcat, right next to it in second place is the legendary Messerschmitt 262 Stormbird (also known as the Schwalbe {Swallow}). In my stash of unbuilt kits are several boxes containing various versions of the plane, and yes, there may a double or two present. I have seen and photographed the Me 262 that is kept at the Smithsonian Air and Space museum on more than one occasion, and have several books in my personal library on this legendary fighter. Anyway, I normally start my reviews talking about the history of the item I am assessing, but thought that I would instead talk about my interest in the topic before delving into the contents of this book.
This new injection molded plastic kit is a great example of modern engineering that exhibits fine surface detail and great fit of parts. It is a builder’s kit, to be sure, and it was indeed a pleasure to build. The design of the parts is excellent and thoughtful allowing easy construction and clean up for a smooth finish. For example, the sprue attachment points are on the inner mating surface of many of the major components which makes cleaning up these areas as easy as it can be. Design features allow the wings to be posed folded, flaps posed up or down, the tail hook posed up or down and there are separate parts for posing the landing gear in the retracted or extended position (although this is not addressed in any way in the instructions). Slide molded parts provide for hollow details and single unit pieces that don’t require assembly and clean up of two halves. Overall, the kit is cleverly designed and simple to build.
This kit is one of a series which Italeri recently released. The idea is a great one, getting young people and adults interested in modeling by supplying everything you need in one box, including a DVD with video instructions.
The kits in the series are:
- Eurofighter EF-2000 Typhoon in 1/72 scale.
- BO-105 Police Helicopter in 1/32.
- HMMWV Fire Department Cargo Truck in 1/32
- Mirage 2000C in 1/72.
The kit is the same mold as used by Revell for their Tiger Meet Mirage 2000. That being said, it’s a good choice for this type of model, as it is not a snap-kit, but it isn’t incredibly difficult either.
I started by putting the DVD in my DVD Player. It wouldn’t read the DVD. The problem is that there are 6 zones for DVD media; Europe is Region 2, and the US/Canada are Region 1.
The MHU-191 is a welcomed addition to the 1/32nd scale community of accessories. It is a very BASIC and easy to build resin kit. The kit was contained in a sealed cellophane bag and consisted of 4 resin parts carriers and a decal sheet. All parts were well protected and not damaged.
The total time it took me to unwrap, clean up, assemble, and paint the model was about 10 minutes. The parts separated from their carrier with very little effort. There was minimal flash and it only took a few passes with the back side of my razor knife to clean. I prewashed all parts and used ACC glue to assemble. The front wheels and draw bar are adjustable for different angles.
