These brass pad eyes have a good appearance to them with a slight bit of texture just on the inside diameter. I think this will help it take paint and give some depth to the inside of the pad. On the real ones, this section rolls down into the bowl, so having a slightly different tone on the ID should give an appearance of depth. These pad eyes measure out at 5/16 inches in diameter, at 1:32 scale, that is 10 inches. Check your references to make sure this matches the assembly or carrier deck you are working with. The brass is a pretty standard thickness. They should lie down nicely for a diorama. I like that there are only two attachment points, making it simpler to clean up the edges of the brass for installation. My approach has been to drill shallow holes, using a drill press so that I get the same depth and then lay the pad eye in so it is flush with the deck on the diorama. The package has a nice picture of how the pad eye sits with respect to the deck as a reference for installation. There are 65 star-type tie downs on the fret.

Many thanks to IPMS/USA and Brengun for this review sample!