Messerschmitt Bf 109G-5/6 Landing Gear (Ax)

Published on
Review Author(s)
Scale
1/24
MSRP
$36.95
Product / Stock #
24015
Base Kit
Airfix 1/24 BF-109G
Provided by: Scale Aircraft Conversions - Website: Visit Site

A definite nod to Ross at SAC for providing IPMS USA this gear set for us to review. One serious note: Ross has spent a lot of time/treasure in bringing his website into a new format, and it works great. Hats off there!

Kits just keep getting bigger it seems, and this landing gear provides a serious bit of insurance after you spend all your time and effort on a model of this magnitude. By the way, kudos to Airfix for tackling this subject at a reasonable price. Shows they are willing ot have a bit of risk for we modeling addicts. Yes, I enjoyed it, and believe it wa was worth the purchase.

Back to the review: This SAC set provides exacting copies of the kit gear in white metal. I say exacting, because the fit is very tight on the already super-engineered kit, and warrants attention while installing the supporting parts. More later.

9 parts are included in the upgrade; the tail gear strut has the oleo scissor installed, and the mains provide these items as separate bits for the build. SAC drops the parts count for the installation from 5 parts per leg to 3. There is a lot to be said for a single unitary strut verses multiple parts with potential failure points under stress. The tail gear is an all-important item, as the overall weight of the model is a factor in stress on this area, particularly with the scale strut fork diameters and the attachment points. The same goes for the main struts, where the attachment plates are integrated within the wing center section with a supporting labyrinth plastic where the strut axle, wheel tracking toe-in, rake, and overall splayed appearance all come together.

When you install the mains, the tight fit of the mounting plates requires you to put a bit of muscle into sliding the parts into place on the internal wing structure. I found a bit of liquid plastic cement did a good job of softening the plastic just enough to ensure the plates are fully pushed into their lineup slots, an important part of the build. Why? Because if you don’t fully seat the plates into the slots, the gear mounting plates will stand “proud” of the mounting structure, and the lower wing section will NOT fit tight with the rest of the structure seam points, particularly on the leading edge. Pay attention to this fact, as I (being the crash test dummy here) had one gear not fulling pushed into place, creating the situation noted.

This necessitated me prying the lower wing section part OUT and off after cementing so I could address my error. “… WHY won’t this dang thing fit tight at the seams, OH something is preventing closure. I know none of you have ever experienced such frustration before. On a kit of this magnitude, with all the options to open up the cowling, this only exacerbates the flaws.

Forewarned is… ya know.

The tail gear, being only 2 parts, was simple to install. I had not attached the wheel/tire assembly as I prefer to paint the model without having to mask such things first, THEN install the “shoes”.

The images are pretty well self-explanatory. If you have the kit, you will understand the need for flush-fitting structure and wing skinning mentioned above.

It’s been a fun build, and the gear makes all the difference in the strength of the final product. Thanks again to SAC for producing and providing this gear!

Bf100G-5/6 Landing Gear

Comments

Add new comment

All comments are moderated to prevent spam


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.