Review Author
Jon Caldwell
Published on
Company
Academy Models
Scale
1/72
MSRP
$24.00

The first mockup of the F2H was actually completed before the end of WWII. A continuation of the FH-1 Phantom program, the F2H was a progressive step in the Navy’s effort to develop jet aircraft for carrier operation. The Banshee, as it was called, entered service in 1948, served in the Korean War, and wasn’t retired until 1961. It was also operational with the Canadian Navy until 1962.

Review Author
Jeff Leiby
Published on
Company
Round 2 Models
Scale
1/48
MSRP
$28.99

The Kits

The molds for these kits were originally produced by Impact in the early 60s as part of a series of British fighters that included the Bristol Bulldog, Fairey Flycatcher, Hawker Fury and the Gloster Gladiator. The molds have changed hands from Impact through Lifelike, Pyro and Lindberg and now are the property of Lindberg/Round 2. This double kit is a reissue by Lindberg Round 2 with improved instructions, one additional decal option per plane and two 36" lengths of rigging wire (not included in any of the previous issues).

Included in the box are:

Review Author
Damon Blair
Published on
Company
Master Model
Scale
1/72
MSRP
$7.50

Guns and pitot probes on most plastic model aircraft leave a lot to be desired. There is often a mold seam down the center of the guns or pitot probe. Another set of problems are that the same parts, once cleaned up, are usually oval shaped in diameter, and the guns do not have that proper “hollowed” look of a real gun barrel. In some scales, such as 1/72, it would be difficult if not impossible to drill out these plastic gun barrels and pitot tubes.

Master Model has solved this problem with an aftermarket kit for the A-1 Skyraider. This kit consists of five metal parts, four gun barrels with flash hiders and a pitot probe to replace the kit’s pitot probe. Each gun barrel is realistically hollow on the inside, with the thickness of the barrel in scale with the model. Master Model’s parts are not unique to a specific A-1 kit, but are compatible with any 1/72 scale A-1 Skyraider kit, no matter which variant it is.

Book Author(s)
Mark Lardas; Illustrated by Paul Wright
Review Author
Rob Benson
Published on
Company
Osprey Publishing
MSRP
$20.00

Thank you to Osprey Publishing for providing a review copy of their new release, USS Lawrence vs. HMS Detroit, The War of 1812 on the Great Lakes, number 79 in the Duel Series. As always, I appreciate all those in the IPMS Reviewer Corps, whose work is critical to sharing new and exciting modeling products with the world.

Review Author
Bill O'Malley
Published on
Company
Hasegawa
Scale
1/36

This is not a highly-detailed kit, but can be an entertaining build for both less experienced and more advanced modelers. Less experienced modelers will enjoy the ease of assembly, and can build the kit without painting. More advanced modelers looking for construction equipment will find the kit to be an opportunity for some extreme weathering.

Background

This is the second kit Hasegawa has produced based on the Hitachi tracked excavator. The first was the Double Arm Working Machine Astaco Neo released in 2015 and updated in 2017 with new parts. This new Hitachi Zaxis kit retains the grasping claw from the Double Arm kit, but adds an excavator bucket and dozer blade as additional options.

The Zaxis 135US-6 excavator is used by contractors needing a tight tail-swing radius to work in confined areas around obstacles. The excavator is equipped with an Isuzu engine.

Review Author
Rod Lees
Published on
Company
Eduard
Scale
1/32
MSRP
$12.95

Continuing our appreciation from IPMS USA goes to Eduard for their having once again provided a sample copy of a long-awaited product, the SNIPER Targeting Pod, and the usual wave of thanks to the IPMS USA leadership for ensuring I received it!

This set contains 7 parts for one SNIPER pod: the resin main body, the forward seeker head, three clear windows for the seeker, a mount with sway braces for the pod, the aft mounting brace and interface for later pods, a PE fret with details such as seeker eye vents, and aft plates, and small decal sheet.

Detail on this set is stunning; you can show the pod head stowed or in operation, and every rivet, joint, screw and bolt is on the pod.

Review Author
Tim Wilding
Published on
Company
Italeri
Scale
1/35
MSRP
$39.99

History

The T17 Staghound Mark I armored car was designed in the United States based on British specifications at the beginning of World War II. The British were looking for a wheeled reconnaissance vehicle with a high level of armor, well-armed and highly mobile. Chevrolet started production in late 1942 and a total of 3000 units were produced. British and Polish units started fielding this vehicle in the spring of 1943 in the Italian Campaign. The Staghound was used by many different counties during the post war era up into the late 1970s.

Review Author
Rod Lees
Published on
Company
Eduard
Scale
1/32
MSRP
$19.95

Extreme appreciation from IPMS USA goes to Eduard for their having once again provided a sample copy of a long-awaited product, the Triple Ejector Rack, and the usual wave of thanks to the IPMS USA leadership for ensuring I received it!

This set contains 50 parts for five TER’s; the resin bodies, Sway braces with ejector pins, TER hanging lugs to put them on the aircraft carrying beams, and PE Switch plates to put in the hollow end of the TER itself. To finish, you are also provided with a small decal sheet.

Detail on this set is, as usual, almost incomprehensible. Every rivet, joint, screw and bolt is on the set.

Review Author
Rob Benson
Published on
Company
Eduard
Scale
1/48
MSRP
$29.95

Thank you to the Eduard Company for sending this detail set for review, it is always a pleasure to see what Eduard’s new products bring to the scale modeling world. Thank you also to the IPMS Reviewer Corps staff members who do the hard work in getting us modeling products to review, the reviews posted, and the news spread to the world.

The photoetch frets arrived in excellent shape in a sealed plastic package with the distinctive Eduard knight logo. One cockpit fret is 2.75 x 1.6 inches on polished metal with color-etched laminated details, and the other fret is 3.1 x 2.75 inches on polished brass. Side consoles and instrument panel parts are provided for either a F2H-2 or F2H-2P. Internal and external details for one model are on these two frets. I particularly appreciate having three clear HUD pieces included on the film part. Only one is required, but I need two of them to complete the set. You can speculate why! I worked up the fighter version for this review.

Review Author
Gino Dykstra
Published on
Company
Dragon Models
Scale
1/35
MSRP
$49.99

You’ve got to give Dragon Models some real credit – they’re willing to put out the oddball kit now and then, and to do it with class. The U.S.-made T54-E1 tank (not to be confused with the Russian T54) was one of the several attempts in the mid-50’s to upgrade the M48 from its 90mm gun to something with a bit more punch. Three different approaches to this idea were initially attempted, including this one, which clearly owes its ancestry to the famous French AMX-13 tank developed around the same time. The idea, of course, was that an autoloading main gun would eliminate the need for a human loader, and would permit extremely rapid firing during combat. There were a couple of problems with this idea, however. First, once the nine-round “magazine” was expended, someone typically had to exit the vehicle to reload it – not something you necessarily want to do under fire.