Reviews of products for scale miscellaneous models.

Review Author
Scott Hollingshead
Published on
April 19, 2011
Company
Model Art
MSRP
$12.50

The April publication of Model Art Modeling Magazine focuses on the Japanese Air Self-Defense Force aircraft in 2021, air defense power after ten years, with several articles on this topic filling the first fifty-five pages of this issue. The magazine also includes new kit reviews, modeling tips, and new kit and item releases. As is typical for Model Art, the magazine measures 182mm by 258mm (about 71/8 by 101/8 inches), and is printed on thick, glossy paper. The production quality is high with these magazines, and just over half of it is printed in color with black and white pages interspersed throughout of the issue. Just in case this is the first review of a Model Art magazine that you are reading, understand that the entire magazine is printed in Japanese with only an occasional English subtitle for those of us who are monolingual, or are just unable to read Japanese text.

Book Author(s)
Olivier Bellec
Review Author
Marc K. Blackburn
Published on
March 22, 2011
Company
Histoire and Collections
MSRP
$49.95

Seventy-one years after the French capitulated to the Wehrmacht in the summer of 1940 the French Army still seems to the butt of jokes. Regardless, the campaign still generates a great deal of interest in the academic and hobby community. With Tamiya’s release of the Char B1bis and the UE Armored Carrier, there is still a tremendous amount of interest in the modeling community for French subjects.

Review Author
Floyd S. Werner Jr.
Published on
March 19, 2011
Company
CB Model Products
MSRP
$25.00

I love tools. I don’t think you can have too many. Occasionally I come across one that I say "how did I live without that?" That is what this tool is. More than a simple jig, this machined metal tool allows you to flat sand the bottom of the wheels evenly and consistently. Let’s face it a perfectly round wheel is not realistic nor are the flat wheels that are common on aftermarket wheels. That is where this tool comes in, the perfect balance of weight without being flat.

How do you use it? Simple get your tire from the kit, clean up the seam lines, set the angle, clamp the wheel between the flat spots on the tool and leave about 1/8 inch out the bottom. Then simply sand with 320 sandpaper while applying pressure to the base plate. It is that simple, but does it work?

Review Author
Ed Kinney
Published on
March 14, 2011
Company
Alclad II
MSRP
$8.25
  • ALC 311Klear Kote Light Sheen 4oz/120ml
  • ALC 312 Klear Kote Semi-Matte 4oz/120m
  • ALC 313 Klear Kote Matte 4oz/120ml
  • ALC 314 Klear Kote Flat 4oz/120ml
  • ALC 408 Armoured Glass Tint 1oz/30ml
  • ALC 600 Aqua Gloss Clear 4oz/120ml

As has been the case for as long as I have known him, Tony Hipp seems to be on an endless quest to develop and bring to market still more excellent products for the discriminating modeler. For years, we’ve searched for the ultimate natural metal finishes, and when Alclad first came on the market, every other product took a distant place far behind. Tony’s products, my estimation, have become the benchmark to which all standards are measured.

These new offerings are not aluminum paints, but will go a long way to make whatever your modeling project is more realistic.

Book Author(s)
Michael JF Bowyer
Review Author
Roger Rasor
Published on
February 28, 2011
Company
Crecy Publishing, Ltd.
MSRP
$18.95

When we hear the words Battle of Britain, those of us who build aircraft models, especially those flown in WW II, immediately think of Spitfires and Hurricanes fending off what was, during that summer of 1940, the best air force in the world. They were the icons of that aerial struggle, but they were only part of the story. The Battle of Britain was also the story of young fighter pilots who flew the Spitfires and Hurricanes, as well as those who piloted lesser-known RAF aircraft and those pilots and gunners of Coastal Command who protected convoys in aircraft bearing names like Hudson, Skua, and Roc. On the ground, the Battle of Britain also was the Home Guard training for the expected invasion; the aerial spotters with tin hats and binoculars; neighbors sadly picking through their bomb scattered possessions, and children climbing over the rubble in the streets.

Book Author(s)
William K Fowler
Review Author
Mike Hinderliter
Published on
February 27, 2011
Company
Concord Publications Company
MSRP
$16.99

This book is Number 6530 in Concord’s Warrior Series. There are 3 pages of narrative on Operation Saturn and Heeresgruppe Sud (Army Group South), including the break down of which units were included. The rest of this volume is just filled with rare pictures of what the soldiers had to endure on the Russian Front, I was getting cold just looking at these pictures. The pictures are printed on glossy paper and are very clear so that you can make out everything in them. I especially liked how thorough the descriptions under each photo were. These pictures are just “diorama heaven” for the modeler showing everyday troop living and pointing out various uniforms and equipment.

Review Author
Mike Hinderliter
Published on
September 21, 2021
Company
Model Art
MSRP
$13.00

Model Art magazine is a very well known model magazine from Japan. It seems to do well selling here, even though it is written completely in Japanese. They really do believe in the saying “a picture is worth a thousand words”. There are so many wonderful pictures in this magazine that you can really tell what is going on.

The magazine is 7 1/8 inches X 10 1/8 inches and is printed on glossy stock. Most of the pictures are in color and also a lot of black-and-white, toward the back. This magazine looks more like a trade paperback than a magazine, and it has a superb binding. No pages falling out here! This book is built to last for many projects to come.

Book Author(s)
Al J. Venter
Review Author
John Ratzenberger
Published on
February 13, 2011
Company
Casemate Publishers
MSRP
$34.95

This book has nothing to do with models or modeling. If you are into modeling that part of the world, you might find a useful picture of a vehicle or aircraft.

The author, Al J. Venter, is a South African war correspondent who has covered Africa and the Mideast for 40-some years He has about 20 books to his credit, a few of which are on diving. I have read none of them, so this was a first for me. There is no doubt that he is not, and never has been, sitting behind too many desks.

From the publisher's data sheet and the book end covers, I gathered the purpose of this book is the show that it's a dangerous profession -- well, yeah, think Ernie Pyle. It was fortuitous (I guess) that as I was reading this, the Egyptian government was being overthrown -- the media became the target of the "pro-government" forces and there was the scene of Katie Couric almost swallowed by a mob -- all that brought the theme home, maybe as well as the book did.

Review Author
Les Walden
Published on
February 8, 2011
Company
Model Art
MSRP
$59.95

Basically, this is a catalog of the Tamiya Paint line in a soft bound, in a ninety-six page format. The book is in Japanese; however there are English captions under the paint chips. The book is divided into sections of colors for cars, metallic’s, clear coats, primary colors and AFV’s/aircraft/ships by nationality.

Also included are photo instructions of masking techniques for those modelers who don’t have an airbrush but rely on hand brushing and spray cans. They are broken down into aircraft, armor and ships. As an added plus there are pictures of their fine line of tools, tape, weathering kits.

This book would be very welcome to any modeler who uses Tamiya paint. It’s a handy reference to have on hand before going down to the local hobby shop or ordering mail order because you know what color you will want and its number.

Review Author
Dave Morrissette
Published on
February 10, 2020
Company
Roll Models
MSRP
$99.00

For those of you that do any scratch building or those that super detail kits, you are well aware of punch sets. For the rest of us, a quick explanation is needed. Roll Models Sub-Miniature Punch and Die set includes a series of series of metal punches and a guide to allow you to replicate small discs. The Sub-Miniature set comes in sizes 0.063, 0.058, 0.053, 0.048, 0.043, 0.038, 0.033, 0.028, 0.023, 0.018 inches. It can be used for punching out plastic card to replicate bolt heads or used to punch paper to make masks.

The process is simplicity itself. You select the size punch you need. Slip your material to be punched between the guide bars, insert the punch and strike sharply. Out the other side comes a perfect little disk. You can do this over and over and it remains the same size.