Reviews of products for scale aircraft models.

Review Author
Dave Morrissette
Published on
Company
Eduard
Scale
1/48
MSRP
$13.00

The GBU-12 Paveway II is a laser guided bomb based on the 500 lb. general purpose bomb with an added head and fins. they have been around since 1976 and model have had versions of them probably since about that time. Eduard has issued a set of four GBu-12's in their Brassin resin line. The set comprises four tail sections, four bodies, four seeker hears with 2 different variants and four sets if front fins for a total of 32 well cast resin parts. Also is included is a small but well printed decal sheet with 13 decals per bomb.

Review Author
Dave Morrissette
Published on
Company
AK Interactive
MSRP
$24.00

AK Interactive makes all sorts of very nice modeling materials from books to weathering items to paints. This review covers their Luftwaffe Camouflages from their Air Series. Inside you will find eight 17 ml eyedropper bottles of paint specifically matched to WWII Luftwaffe colors. The following colors are included:

  • Interior Colors - RLM 02 and RLM 66
  • Bottom and Base Colors - RLM 65 and RLM 76
  • Top and Mottle Colors - RLM 70, 71, 74, and 75

These can be used on many Luftwaffe planes, for example, Bf 109s, Fw 190s, Me 410s and He 219s. Most of these are early war colors. The paints are acrylic and are made by Vallejo. They are very fine grained and result in a medium-flat finish. AK recommends their AK712 thinner. Not having this, I tried a few other brands. The best substitute I found was Createx thinner/airbrush cleaner.

Review Author
David Wrinkle
Published on
Company
Eduard
Scale
1/48
MSRP
$7.95

Without a doubt, the Eduard 1/48 scale Bf 109G-6 has to be one of the most controversial kits released in the past year or two. Personally, I’ve had a good look at completed examples, as well as a good look at the plastic in the box, and I’m pretty happy with the kit.

For this review, I’ll be looking at the Eduard Brassin Bf 109G-6 wheels made for Eduard’s kit. Without diving into my stash to check, I see no problem with these wheels being used on Bf 109 G-6 kits from other manufacturers. Although, please note, your mileage may vary. The wheels are pre-molded to fit directly over the landing gear legs with just a slight bit of slop. Personally, I prefer this type of fit with resin parts, especially over the alternative: extremely snug fit.

Book Author(s)
Alexander Mladenov
Review Author
Phil Pignataro
Published on
Company
Osprey Publishing
MSRP
$18.95

I find it hard to believe the MiG-21 design is almost as old as I am and is still serving as a front-line fighter in several air forces around the world. I’m still pretty active, but no longer a “front-line fighter” by any stretch of the imagination. Since the end of WWII, in almost any conflict involving Western air forces, the adversary has been a Mikoyan-Gurevich designed aircraft: in many instances, the MiG-21 Fishbed.

In Mikoyan-Gurevich MiG-21, Alexander Mladenov thoroughly covers the MiG-21 from its early development to its role in several conflicts around the world. His descriptions are often technical, but very readable nonetheless. The chapter titles give a good idea what is discussed:

Review Author
Dave Morrissette
Published on
Company
Eduard
Scale
1/72
MSRP
$23.00

Eduard's set 73467 is meant to detail Tamiya's 1/72 A6M2b. The set addresses the cockpit, the wheel wells, the engine and adds dropped flaps. This is done with two superb frets of photoetch. One is the standard set and addresses the flaps and wheel wells and engine with 61 parts. The second fret is colorized and covers the cockpit and miscellaneous parts with 66 parts. All are beautifully done.

Starting with the cockpit, there are three things that make a huge difference. First is the superb seat. it is scale thin and has the needed holes. It takes a little roll to get the right shape. Added to that are fantastic seat belts. Second are the side walls and panels. it is preprinted and also adds to the cockpit. Last is the instrument panel which is a little work of art. All of these fit well and as you can see by the detail shots,. they make the cockpit look fantastic.

Review Author
Dave Morrissette
Published on
Company
Scale Aircraft Modelling
MSRP
$7.35

Each issue of Scale Aircraft Modeling has been a basic design and format but they changed it up with the last issue. In this issue, there are five feature articles, an Aviation in Profile piece, and five Compact Build Reviews.

The Feature articles for this issue start with Jay Laverty's build review of the Trumpeter 1/48 Westland Whirlwind Mk I. The kit is built and shows no issues. The majority of the article concentrates on the superb weathering done to replicate V HE which showed a lot of chipping. Mr. Laverty also corrects the markings, adds Barracuda cast wheels and uses ComArt's excellent weathering set. The result is spectacular!

Next up is Mr. Laverty's build of Planet models 1/48 Westland Welkin. This is a good size all resin kit and it is finished superbly in a Medium Sea Grey scheme. There are also some excellent tips in working with resin kits.

Review Author
Roger Rasor
Published on
Company
The Great War Aviation Society
MSRP
$13.50

Cross & Cockade International is the quarterly publication of a non-profit UK based organization known as The First World War Aviation Historical Society. This organization has been publishing these journals since 1970 with the objective of furthering the study of First World War Aviation History. The second journal of 2014; Volume 45/2 (Summer 2014) continues the organization’s mission by providing a wealth of information on varied WWI aviation subjects. The cover of this journal features a painting by Allan Forbes of a pair of 64 Squadron de Havilland DH5s attacking ground targets. It serves as a precursor to an interesting eight-page feature article about the 64 Squadron and the DH5s they flew.

Following an Editorial page, the contents includes:

Review Author
Chris Smith
Published on
Company
Dragon Models
Scale
1/32
MSRP
$64.00

Background

On November 27, 1944 a 21-year-old Captain named Leonard “Kit” Carson was leading a flight of Mustangs on a mission to strafe oil reserve stores at Leipzig. As they approached the area of Magdeburg, Germany a large group of 50-75 Fw190s was spotted. The squadron dropped their long-range tanks and turned to attack the Focke Wulfs head on. In a series of turning, diving and climbing dogfights Carson managed to down five of them. By wars end, then Major Carson would fly 115 combat missions and score 18 ½ aerial kills with an overall score of 23 with ground kills included. Carson flew four different Mustangs called “Nooky Booky” including P-51K 411622 depicted in this review. I don’t think anymore of an introduction is needed for this legendary aircraft.

Review Author
Steve Collins
Published on
Company
Quickboost
Scale
1/72
MSRP
$4.99

This is another of Quickboost’s more-or-less drop-in replacements for kit parts. In this case, it’s the exhausts for Hobby Boss’s Mi-2 Hoplite helicopter kit. The parts in the kit are hollowed out for you already, but the walls of the tubes are a bit thick. The replacement exhausts from Quickboost are direct replacements for the kit parts, but with thinner walls. They fit right into the sides of the cowlings as if, well, they were made for them. They also appear to be slightly more accurate in shape than the kit parts. The kit parts are oval shaped, whereas the prototype exhausts (and the QB parts) have a slightly flattened side to them. This set is definitely recommended as a time saver.

My thanks go to Aires Hobby Models and Quickboost for providing the parts for a rather esoteric subject and to IPMS/USA for allowing me to review them.

Review Author
Steve Collins
Published on
Company
Quickboost
Scale
1/72
MSRP
$6.50

This set from Quickboost is designed to replace and improve upon the kit parts for Hobby Boss’s Mi-2 Hoplite. It includes part from two other Quickboost sets, as well as FOD covers (Foreign Object Damage) for the intakes and exhausts. The kit’s air intake cowling includes two holes through which you place the air intakes. It also has a molded-in intake in the upper center with a screen engraved in it. Additionally, there are two exhaust ports on each side of the engine cowling. The Quickboost parts are the cowling with two hollowed intake tubes cast in, along with an opening at the upper center, plus four properly shaped and thinned exhausts. The neat addition to this set is the FOD covers for all these openings, along with photoetch pull handles for them. You also get a photoetch screen to place over the opening in the air intake cowling, along with a spare screen.