IPMS Number
44962
David Horn
Reviews By Author
|
AN/ALQ-87 ECM PodPublished: March 28, 2020 The AN/ALQ-87 is an electronic countermeasure pod (originally the QRC-160-8) was first used in 1967. Carried by a variety of military aircraft during the Vietnam, it was commonly seen on the F-100, F-101, F-105, F-111, F-4 and the AC-130. The ECM pod function is to jam the enemy radars guiding surface-to-air missiles, and ground-control intercept radars handling multiple jamming functions. The… more |
|
C-130 J Sponson SetPublished: March 1, 2020 Brengen produces a wide range of unique resin, photo-etch (PE) accessories and full kits in 1/32, 1/48, 1/72 and 1/144. These nacelles were previously produced by Attack Squadron (Arma Hobby) and that product line was sold to Brengen which now offers the C-130 product line many are familiar with. This resin set comes in a sturdy cardboard box containing a left and right forward section… more |
|
C-130 J Engine SetPublished: March 1, 2020 Brengun produces a wide range of unique resin, photo-etch (PE) accessories and full kits in 1/32, 1/48, 1/72 and 1/144. These nacelles were previously produced by Attack Squadron (Arma Hobby) and that product line was sold to Brengun which now offers the C-130 product line many are familiar with. This resin set comes in a sturdy cardboard box containing four complete Rolls Royce engine… more |
|
KC-130 J Harvest HawkPublished: February 25, 2020 Brengen produces a wide range of unique resin, photo-etch (PE)accessories and full kits in 1/32, 1/48, 1/72 and 1/144. This conversion set was previously produced by Attack Squadron (Arma Hobby) and that product line was sold to Brungen which now offers the C-130 product line many are familiar with. This resin set comes in a sturdy cardboard box containing a refueling pod (typical on… more |
|
F-5 Tiger II "Freedom Fighter" (shark nose versions) - F-5 E, F - Pitot Tube and 20mm Gun BarrelsPublished: January 15, 2020 Packaged in a thin, heat sealed pouch with five turned parts, two gun barrels, two different sized plugs (ballast) and one pitot tube. Compared to parts in the new F-5E from Kitty Hawk kit, the Master parts are very fine, detail is the finest I have ever seen, and directions are very clear and easy to follow. The gun barrels are very precise and retain concentricity where the kit parts seem… more |
|
F-5 Tiger II "Freedom Fighter" (standard nose versions) - F-5A, E, F - Pitot Tube and 20mm Gun BarrelsPublished: January 14, 2020 Packaged in a thin, heat sealed pouch with four turned parts, two gun barrels, one plug (ballast) and one pitot tube. Compared to parts in the new F-5E from Kitty Hawk kit, the Master parts are very fine, detail is the finest I have ever seen, and directions are very clear and easy to follow. The gun barrels are very precise and retain concentricity where the kit parts seem thick and may… more |
|
AN/ALE 47 Countermeasures DispenserPublished: December 24, 2019 Brengun produces a wide range of unique resin and photo-etch accessories in 1/32, 1/48, 1/72, as well as 1/144. This item covers a unique subject that will assist outfitting a wide variety of aircraft. There are resin chaff/flare dispensers produced for a specific subject complete with their entire mounting. This accessory will allow the modeler to add it to kits where fidelity is poor… more |
|
F-18C/D WheelsPublished: December 23, 2019 Brengun produces a wide range of unique resin and photo-etch accessories in 1/32, 1/48, 1/72 as well as 1/144. This wheel set is cast with zero flash with prominent pour blocks up half the wheels. The finish is slightly textured but realistic and raised lettering is not visible however in this scale, reading the lettering should not be an issue to most modelers. The tread is not that deep but… more |
|
RF-5A/E/S T-38 Talon, F-5BPublished: December 15, 2019 Packaged in a thin, heat sealed pouch with three parts, two gun barrels, and one pitot tube. Compared to the Academy parts, the Master parts are very fine and detail is the finest I have ever seen and directions are very clear and easy to follow. The gun barrels are very precise and retain concentricity where the kit parts seem thick and may appear warped. As for the pitot tube, I wish I had a… more |
F-18 Super Hornet WheelsPublished: December 15, 2019 Brengun produces a wide range of unique resin and photo-etch accessories in 1/32, 1/48, 1/72 as well as 1/144. This wheel set is cast with zero flash with prominent pour blocks up half the wheels. The finish is slightly textured but realistic and raised lettering is not visible however in this scale, reading the lettering should not be an issue to most modelers. The tread is not that deep but… more |