Israel IAI Kfir C2/C7
IJN Cruiser Submarine I-16, Pearl Harbor with Detail Set
Johnson Lowe's NASCAR #48 Chevy SS
Sea Hurrican Mk. Ib
2014 Corvette Stingray
Pz.Kpfw.III Ausf.M with Schurzen
Battlestar Galactica Pegasus
Westland Whirlwind FB Mk.1
Russian Light AA Gun Set
Alfa Romeo 2300 8C Monza Race Car
Welcome to the IPMS/USA Reviews site!
Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.
IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.
Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.
To learn more about IPMS/USA, please see our About Us page.
ICM has released a new 1/48th scale Bristol Beaufort Mk. I, Bombing Raid version with decals devoted to No. 22 and No. 217 Squadron. For this boxing, there is an additional Sprue W (3X) that will turn this Mk. I into a bombing raid ordnance configuration versus the torpedo version of the previous boxings (there is no F2 or torpedo trailer sprue in this kit). This is a 2-part review and PART 1 will review the contents of this kit.
In The Box
The kit box is typical top open with a nice illustration, but it does have a heavier cardboard fully enclosed box to protect all plastic inside. The sprues are packaged in a single plastic bag and the styrene is your typical light gray and clear plastic and will bond well with your usual modeling cement.
UMM-USA has provided the Rollmade IV “Universal Roller” for review. This tool is use for photoetch, brass, copper, and aluminum sheets to create rolls in diameters of 9.0, 10.0, 11.0, 12.0, 13.0, 14.0mm. It does NOT come with a roller pin but any wood dowl or metal rod will suffice.
It is made from a harden tempered aluminum and the overall size is: L 90mm x W 20mm x H 10mm. Very compact and easy to store.For this review, I used some leftover brass PE, Eduard metal PE, and soft copper wire along with a metal straw (as a roller) to test. Each piece of material formed with ease in the Rollmade IV. I do recommend using a larger diameter roller versus the straw I used since the “springing action” of the material will want to conform to the roller that is used.
UMM-USA has provided us with a Double Beveled 2.5 mm Gliding Scriber tool. The scriber is made from hardened steel and will be able to scribe plastic and resin. The double bevel feature will allow the modeler the ability to scribe into tight 90-degree corners that, through the molding process, may have left behind a small radius of material from styrene injection, resin molded parts, or loose printer tolerances of 3-D resin.
On sample parts from my spares box, the scriber cuts effortlessly into plastic. Using a spare wing’s interior side, I used a metal ruler as a guide to make some straight lines and freehanded some other lines.
Using a spare 1/48 scale missile and bomb with molded fins, I was able to create a nice sharp scribed edge where the fins meet the surface of the ordnance. The other fin I left as molded for a visual comparison of how a few swipes of this scriber adds great detail.