Moebius has been making a name for itself with repops of some old Aurora figure kits mixed in with new kits in the same style. Green Lantern is one of the latter. This 18 piece kit represents him in flying mode, holding down a robot using the power of his ring. The pose is very dynamic. For those of you who don’t follow Green Lantern (got to admit I am one of these), this version represents Hal Jordan, a test pilot who gets selected by the Guardians of the Universe to be the first human Green Lantern. The rest of the data you can read on the instruction sheet or the internet.
Welcome to the IPMS/USA Reviews site!
Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.
IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.
Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.
To learn more about IPMS/USA, please see our About Us page.
History
No modeler of World War II fighter aircraft can possibly be unaware of the background of the Spitfire, so no discussion will be provided. Over 30 different Marks and variants of the Spitfire were produced before, during, and after World War II, and nearly all of them have appeared as 1/72 scale kits at one time or another. Of the long-wing Mk. VII, injection molded kits have been issued by Hasegawa, Jay’s Models, and a resin kit from CMR. Italeri’s kit, issued in 2012, is a welcome addition. I have built the Hasegawa kit and it is excellent, and the Italeri kit will be interesting competition. I have not seen the other two, but I understand from reviews that they both are very good kits.
History
The Reggiane RE-2002 shows its ancestry, as its designers were obviously influenced by the Seversky P-35. The original RE-2000 was first flown in 1938, and since the plane had some problems, the majority of the RE-2000’s were exported to Sweden and Hungary. A few were used by the Italian Navy. Reggiane attempted to improve the design by installing a German DB-601A-1 liquid-cooled engine, resulting in the RE-2001. It was accepted by the Regia Aeronautica, but shortages of German engines, plus the fact that the same engine was used in the Macchi C.202 Folgore, restricted production to 252 aircraft. To keep the production lines going, Reggiane redesigned the plane for a third time, using a 1,175 hp Piaggio P.XIX fourteen-cylinder, intending the type mainly for the close support role. A bomb load of 1,433 pounds could be carried in a fuselage rack.
This latest tool from CB Model Products is one of the best yet. This high precision punch and die set consists of 12 hardened steel punches and a clear acrylic/metal guide plate assembly. There is a desiccant included to help keep the rust off the metal parts. These pieces are contained in a compact plastic case with a nice hint and procedure sheet.
The steel punches are machined with a slight angle. These punches are designed to be used on up .030 styrene. The punches come in .040”, .051”, .058”, .069”, .080”, .088”, .101”, .110”, .119”, .127”, .140” and .151”. That should take care of most needs in 1/72, 1/48, 1/32, and 1/35th scales. You may want to wipe the parts down with some WD-40 and a rag to preserve these delicate parts for the long term.
The EA-18G Growler is the US Navy’s newest ECM aircraft, replacing the venerable Grumman EA-6B Prowler. Now in service with several squadrons, the EA-18G provides our military forces the latest hardware for electronic warfare. Boeing modified the basic two-seat FA-18F Super Hornet for the ECM mission by adding numerous antenna, sensors, and stores, and by removing offensive items such as the 20mm cannon. To produce a model of this machine, Hasegawa essentially did the same. They took their basic FA-18F Super Hornet kit and added sprues with all the relevant pieces to produce the G model.