Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Ken McDevitt
Published on
Company
Master Model
MSRP
$6.95

This is the third replacement piece that I have acquired for my 1/48 Eduard Spitfire Mk.Ixc build. Master Model has produced a detailed pair of Hispano 20mm cannons that provide details that are missing even in the excellent Eduard kit. This is not to diminish the Eduard kit that has been reviewed by Bret Green as the definitive (his opinion) 1/48 Spitfire kit. In the photo the Master Model pieces are compared side by side to the sprue attached parts of the Eduard kit. You can clearly see the enhanced definition of the Master Model replacements. On close inspection there may be the opportunity for a steady hand, lots of patience and small sharp needle to do a little hollowing out of the front of the cannon barrel.

Recommendation

I highly recommend these replacement parts.

Thanks to Master Model for providing these parts and to IPMS/USA for the opportunity to review this item.

Review Author
Jim Stratton
Published on
Company
AMT
Scale
1/25
MSRP
$31.95

Round 2 Models continues re-releasing older kits, including this re-release of a 1975 Chevy Rescue Van. The kit is advertised as a “Dual Color Kit.” This means that the kit was released molded either in white or in red; not two colors in the same box. My review model was molded in white. There is no indication on the outside of the box as to which color the model inside is molded in. I was lucky and got the white one. I prefer this over the red molding. I feel it’s more difficult to over-paint a red molded model and get a good even base coat. Red is just too difficult to over-paint, especially if going to a lighter color. This van model has been re-released many times since the initial release in 1975. I know that the kit was used to represent the A-Team’s van, released when that TV show was popular.

Book Author(s)
Paul F. Crickmore
Review Author
Chris Smith
Published on
Company
Osprey Publishing
MSRP
$18.95

The story of the Lockheed A-12 began with a bright orange fireball 70,000 feet over Sverdlovsk in the Soviet Union. This explosion, 1500 miles deep into Russian territory, would start a diplomatic crisis with repercussions that directly impacted the A-12 and SR-71 operations for the rest of their service lives. That explosion severed the tail from a Lockheed U-2 reconnaissance aircraft and sent the pilot, Francis Gary Powers, plummeting into the hands of the Soviet authorities. After the U.S. broadcasted a cover story assuming Powers had died, the Soviets revealed they had parts of the plane and Powers in their custody. This caused then U.S. President Eisenhower to do two things, stop all over flights and find a way to make the U-2 invisible to radar. While some efforts where made to reduce the U-2 radar signature, it was just not possible to cloak a jet-powered glider with long straight wings. Enter Lockheed’s Kelly Johnson.

Review Author
Dave Morrissette
Published on
Company
Master Model
Scale
1/48
MSRP
$11.00

I have several of Master-Models pitot tubes in my stash and when I saw this latest set, I jumped on the review item as they have out done themselves again. This is a GAU-8 Avenger Gun Tip for the A-10 Warthog. The set also includes a replacement pitot tube.

In the set, you get 2 photoetch pieces making the ends of the gun barrel with holes for the barrels and center support. Your get one turned brass center post and seven turned gun barrels and the gun barrel cover in turned brass with drill holes- this piece is spectacular in its craftsmanship. Lastly, you get the tuned brass pitot tube.

Assembly is simple. Glue one end on the barrel housing. Insert the center shaft and glue the other end on making sure the holes are aligned with one another. Once dry, glue in the barrels and you're done.

Book Author(s)
Bill Yenne
Review Author
Rob Benson
Published on
Company
Zenith Press
MSRP
$40.00

Thank you very much to Nichole at Quayside Publishing Group, the parent corporation of Zenith Press for providing this book for review. Thanks are also due to the IPMS Reviewer Corps for allowing me the opportunity to explore a wonderful documentation and fascinating historical description. Author Bill Yenne has struck an excellent balance of historical facts and data woven together in a great story. I found the entire book to be engaging at all times. The book is not just a valuable reference; it is a great read as well. I remember building the Testors F-19 stealth fighter a long time ago when it first came out. I was disappointed when the F-117 Nighthawk became public a few years later, but after reading this book and seeing prototype photos I believe that Testors was not as far off as many may think, nor were Tom Clancy and Larry Bond in their description of the Frisbee in Red Storm Rising.