This set replaces the horizontal stabilizers and elevators of the base kit. While the Airfix parts are certainly nice in their own right, this set allows the control surfaces to be posed and have slightly thinner trailing edges for a more scale appearance. Be very careful trimming the resin away from the mounting tabs and test fit to ensure as close a fit as the kit parts provide. The elevators fit very well into a recess molded into the stabilizers. If you want to have the rear control surfaces offset this is the way to achieve that. Thanks to Aires for the sample of a well done set.

During the latter years of World War II, the Luftwaffe was scrambling to finds ways to combat the ever increasing aerial onslaught of the Allied bombing campaign. Many solutions were proposed, some very successful, such as the Me 262, while others never left the drawing board. Some very odd proposals actually made it off the drawing board. The Bachem 349 Natter was one of these odd ideas that were actually in the test phase when the war ended.

This prop is not included in the Airfix kit. The Rotol prop sports a different blade shape with a wider chord. The spinner is the same as provided in the Aires replacement for the kit part QB72 491 reviewed elsewhere on this site. The spinner puts the joints lines in the right place and in the right scale. Be sure to cut the blades off the casting block to allow the maximum shaft length. The spinner holes go through the part and the long blade shafts help with the alignment of the blades. Check the blades carefully because the leading and trailing edges are slightly different shapes and I managed to put one in backwards. The tool also has a hole to center your drill so you can drill out the spinner for a prop shaft. This part is a welcome addition to an already cool little kit.

Thank you Aires Quick Boost for jazzing up the Defiant.