This ResKit 3D printed resin set includes three crew members: pilot, copilot, and a rear facing crew chief or flight engineer that controls the hoist. The figures come in three incredibly detailed resin blocks. The first includes the three figures seated in CH – 54 seats. The second block includes four heads for the figures. There are options for the pilots’ helmets to have visors down or up. The headsets on the helmet are printed with a gap between the figure’s face and the headset. The crew chief head is molded on the body with the visor up. The third block includes the control levers for the CH – 54.

The ResKit figures are produced in cooperation with ICM so they will fit perfectly into the ICM cockpit.

Scale Aircraft Conversions has been creating parts for modelers since 1990 and has long supported the IPMS-USA Review Corps with their items for review. The white metal parts are meant to replicate the original kit parts, but with the additional strength of being metal instead of plastic. There is also an advantage in that the metal gear can be slightly bent, if necessary, once installed to allow for improved positioning.

After reviewing the Scale Aircraft Conversions metal landing gear for the Fine Molds Ki-43 III I knew exactly what I was getting into with this set. My sample had castings that seemed rough along with mold part lines and parts slightly bent in the package. I cleaned up one main gear leg and the tail wheel leg as best I could. A coat of Mr. Surfacer black followed by a layer of Testors Steel Metallizer did not seem to completely cover some issues I had identified. A few layers of watercolors highlighted the details.

The IPMS-USA recently began receiving items for review from Gaahleri. The company is relatively new and first introduced airbrushes and has since expanded into the production of their own line of paints. In addition to their individual and sets of paints, they have also released their own Cleaner, which can be used on both paint brushes and airbrushes. This cleaner is advertised as being non-toxic, odorless, non-flammable, and safe for the environment by Gaahleri.

The Kaleido ColorWorks Cleaner used in this review came packaged in a 210ml (7.1fl oz) bottle that sells reasonably at $9.99, which is comparable to other airbrush cleaners. I have successfully used the Cleaner for the Gaahleri ColorWorks Metallic paints as well as several of their Auto Colors. While the Cleaner does a nice job with initial cleaning, I continue to use a Lacquer Thinner for the final cleaning, and when I first added this to the “clean” color cup, I did force out a small amount of paint residue.