Book Author(s)
Jonathan Mock
Review Author
Vince Leonardi
Published on
September 13, 2011
Company
Concord Publications Company
MSRP
$19.95

Always on the lookout for a good book on my favorite hobby I stumbled upon this book in my local Barnes & Noble and purchased it right away, as the new logo colors, photography, and use of the rich “painting”-like illustrations drew me in.

The latest regeneration of Airfix has brought about not only great new tooling of kits, but also reissues of classics, a full line of paints, tools and finishing equipment, and now the resurrection of publishing efforts. First, they brought us Airfix Model World on a monthly basis, but now we have their first new book, “The Airfix book of SCALE MODELLING”, by Jonathan Mock. This book weighs in at 176 pages chock-full of color photos and state-of-the-art CAD paintings just like those in the new Airfix magazine.

Review Author
Roger Carrano
Published on
September 13, 2011
Company
Eduard
Scale
1/32
MSRP
$16.95

A while back, I purchased RBF (Remove Before Flight) flags for a Skyraider and they gave the aircraft that final detail which changed it from bland to grand. The RBF flags added a few more degrees of realism.

Now, Eduard has come out with these RBF Flags for aircraft modeled after Israeli units, such as the F-16. Included in this set are 18 red exterior flags, 14 yellow interior flags, and 4 placards for ejection seats, all in Israeli writing. These are also colored and printed on both sides which enable them to be “posed” in any position, such as twisting them to make them appear to be blowing in the wind or just falling naturally in the cockpit.

I highly recommend these RBF flags to anyone building an Israeli aircraft for that extra effect. As always, my thanks go out to Eduard for submitting this product for review.

Book Author(s)
Tony Holmes, Editor; Tony Holmes, Martin Bowman, Carl Molesworth and Donald Nijboer
Review Author
Howie Belkin
Published on
September 13, 2011
Company
Osprey Publishing
MSRP
$25.95

Osprey is a prolific publisher that has coupled excellent authors with fantastic artists that have combined their talents, mostly under Editor Tony Holmes’ direction, to produce hundreds of mostly soft cover “must have” books for serious modelers and history buffs. Any ‘good’ model show will have someone selling Osprey books and any modeler who has started his own reference library, owns Osprey books. Over the years, Osprey has divided them into several subcategories like ‘Aces,’ ‘Elite Units,’ and so on. One of the newest categories is the “Duel Series” where for example, one famous aircraft or tank is pitted against one of its contemporary enemies. I own many titles authored by IPMSer Steve Zaloga and every one written by Chris Bucholtz. I’m sure many more authors are IPMS members too that I’m just not aware of.

Review Author
Phil Peterson
Published on
September 12, 2011
Company
Acreation Models
Scale
1/160
MSRP
$4.95

Acreation is one of several aftermarket companies that offers Pan Am decals for the new Moebius kit of the Orion III Space Clipper.

The small sheet is well printed and in register. It offers the Pan Am Globes, Pan American titles for the fuselage, and Pan Am titles for the wings. These last are not seen on the model used in the film but I have seen builds with them in the past. Also included are several small markings including "No Step" markings and some that are included in the kit decals, if you don't use them, to depict the panel lines.

The sheet has a continuous carrier film so make sure you cut the images close, especially the globes.

The only thing missing from this set are some instructions to tell you where to place the smaller markings. I even went to their website where they have a space for Instruction Guides, but they are listed as Coming Soon so no help for me.

Book Author(s)
Wayne Mutza
Review Author
Chuck Bush
Published on
September 12, 2011
Company
Squadron Signal Publications
MSRP
$19.95

Wayne Mutza has written his second book on American Fire Apparatus aimed at the scale modeler. This volume covers Aerial Equipment and, from Don Greer’s paintings on the front and back covers to the more than 300 color and black and white images inside, it is a feast for the eye.

The introduction explains that by the late 1800s the increase in multi-story buildings brought on the organization of the first Hook and Ladder Companies. They arrived at the blaze carrying multiple ladders and pike poles, or “hooks”, for pulling down walls and ceilings. American LaFrance purchased the patent for a wagon-mounted ladder raised by a worm gear and fitted with a tiller seat from Daniel D. Hayes of the San Francisco Fire Department. The Hayes Aerial went into production in 1881.

Review Author
Perry Downen
Published on
September 12, 2011
Company
Yellow-Wings Decals
Scale
1/48
MSRP
$13.95

I would like to thank Yellow-Wings Decals for this review sample and IPMS/USA for allowing me to review it.

The U.S. military had some of the most colorful aircraft ever prior to WWII. There were bands of bright colors on the fuselage and chevrons on the upper wings to identify section leaders. The rudders had red, white, and blue stripes. Bright tail colors were added to identify squadrons or assigned carriers. The national insignia was a large blue roundel surrounding a white star with a red roundel in the center. Added to all this were the orange-yellow wings and horizontal stabilizers. The color schemes could not get more garish. But, they did. Enter the Boeing P-26.

Designed and built by Boeing in the early 1930s the P-26 was the first all-metal monoplane production fighter aircraft used by the United States Army Air Corps, USAAC. However, it was a transitional design retaining the wire-braced wings, fixed landing gear and open cockpit of previous designs.

Review Author
Mike Hoekstra
Published on
September 12, 2011
Company
Model Art
MSRP
$29.00

This is my first experience with Model Art publications. This issue is dated August 2011 and titled Model Art “Auto Modeling” No. 827, Vol. 24. Its main focus is on the spectacular race cars of the ’70’s Formula 1 series. The first few pages are an index of topics and noted cars of 1973-78 in succession. The first noted car is the ’73 Tyrrell Ford from that year’s championship, driven by Jackie Stewart. The kit supplied and meticulously reviewed is a Tameo Kits 1/43 white metal kit. It’s not a common scale for autos, as most are 1/24, 1/25, 1/20, or 1/12. This is the first offering I’ve ever seen in this scale for autos that is a complete white metal cast kit. The next 40 pages cover the same format of various kit offerings from Tamiya, Studio 27, Hasegawa, and E.Jan conversion kits. Each includes detailed pictures of kit components and steps in assembly. Pages 43-50 cover specs on the vehicles, including blueprint-type drawings.

Review Author
Bill Hollis
Published on
September 11, 2011
Company
Dragon Models
Scale
1/48
MSRP
$39.00

One thing you can never say about Dragon kits is they don’t give you a whole bunch of plastic for your outlay of freshly printed samolians.

I’m sure the aftermarket folks will work their magic in resin and brass for this kit, but in reality, little of it is necessary to the builder who wants a neat, well detailed miniature of the prototype for his collection. It’s all right here in the box.

As we’ve said, if you like lots of plastic, there must be half a dead dinosaur in this box. Beaucoup interior parts including the requisite cockpit goodies are there along with nose cannon bay, multi-part wheel wells and two very nice “bonus” engines, which you do not have to use if the mood doesn’t strike you. There are no corresponding “open” cowling pieces to go along with them, so without modifying the closed covers it’s pretty much an all or nothing proposition if you want to mount one or both Daimlers exposed.

Review Author
Phil Peterson
Published on
July 4, 2020
Company
Moebius Models
Scale
1/160
MSRP
$29.95

For years I have wanted to replace the old Aurora kit of the Orion III that I lost years ago but the cost was too high and the old Airfix kit has several accuracy issues. But now my wait is over as Moebius has released their second kit from the movie 2001 and it is a beauty.

The new kit of the Orion III Space Clipper is very simple to build with only 12 white plastic parts and 5 clear parts (and that includes 2 pieces for the stand). The parts are well packaged with the tail parts extra protected for the tail prongs. Unfortunately, one of mine was bent but a little finger pressure put it back in line. The fit is pretty good though I still had a little trouble matching up the fuselage seams and there were gaps between the upper wings and fuselage. I used some styrene strip to fill the later.

Book Author(s)
Steve Backer
Review Author
Michael Scott
Published on
September 11, 2011
Company
Seaforth Publishing
MSRP
$39.95

The genesis of the modern all-gun warship occurred when Jackie Fisher, who was for a time Great Britain's First Sea Lord, serving with Winston Churchill, First Lord, during WWI, designed the first fast, big-gun battleship named HMS Dreadnought, a name subsequently given to all ships of that class. Fisher was determined that the prime characteristics of a superior warship were found in two things: speed and firepower. Consequently, this same thinking that produced the Dreadnoughts also created the first Battlecruiser, HMS Invincible, which was basically a somewhat smaller, faster ship, more lightly armored than the battleships, but almost as heavily armed. As the Dreadnoughts made all other battleships obsolete, so the Battlecruisers made all other cruisers instantly obsolete.