The M36 was a late war tank destroyer based on the M10A1 tank destroyer hull and a new turret to carry the 90mm gun. The M10A1 was based on the M4A3 Medium Tank hull with the Ford GAA 8-cylinder 500 HP engines. In early 1944, the Army had 600 M10A1 hulls ready, so they diverted them to be used with the new 90mm turret to become M36s. Towards the end of the war, M10 tank destroyer hulls were used and these became M36B2s. This hull was based on the M4A2 Medium Tank using two conjoined 6-cylinder GM diesel engines to make a 12-cylinder engine. This kit offers both versions to be built by having different engine decks, exhaust and rear engine plates.
What's New
Mikael Forslund was born on June 7, 1960 and currently lives in Falun, Sweden. He has worked as a press photographer since 1978 both as a freelancer and as a staff photographer and currently uses Nikon cameras. He has authored over twenty books with his latest book on Spitfire in Sweden celebrating the 80th anniversary of the first flight of the aircraft type on March 5, 1936.
Dariusz Karnas is a skilled modeller and amateur aviation historian. He lives in Przemyśl, Poland. He has authored or contributed colour plates and / or scale drawings for over one hundred publications. These include MMP’s Polish Wings, Scale Plans, and Inside series as well as books in the MMP Yellow series: Fieseler 156 Storch 1938-1945 (2012) and Mikoyan Gurevich MiG-15 (2004). You can find Dariusz Karnas on Facebook at https://www.facebook.com/people/Dariusz-Karnas/100008987326348 .
This is the third volume of the “Inside” series of books featuring the instrument panels of various Polish WWII aircraft. MMP Books previously released Vol 1 which covered the Bf-109F-4, Bf-110E, Fi-156 Storch, Fw-190A-3, Hs-123, and the Ju-88A-4. Volume 2 featured the Bf-109E, Me-262A, Ju-87A, He-111, Hs-126 and the Do-17.
For a long time now I have loved the look of this range of kits and have wanted to build one, so I jumped at the opportunity to build this kit. It is an excellent kit in the Hasegawa Machinen Krieger series. The kit is very easy to build as long as you watch the instruction details carefully.
In the Box
- 11 x red sprues
- 1 beige sprue
- 1 clear sprue
- 1 dark grey vinyl sprue of polycaps
- 1 vinyl/rubber sprue
- 1 decal sheet
- 1 painting guide / collectors card
- 1 instruction booklet
- 1 small correction sheet for the instructions
All the sprues are extremely well molded with no flash and great detail. The decals allow you to finish the Mk 44 in many different ways. The painting guide shows 4 more, and 2 more on the back of the box.
Fly Model is a new company to me, but you’ll probably hear from them more in the future. They offer a number of interesting and off-beat models in all the popular scales. They have a 1/32 Hurricane Mk I, a 1/32 Westland Wessex, a 1/48 BAC Jet Provost, three different 1/72 Messerschmitt Bf-108s, and about 25 different 1/144 DC-9s. This list only scratches the surface. You might want to look at their web site. They have an interesting resin kit of an “Abstosswagen” in 1/35. It took me some looking, but it’s a railroad flat car for hauling tanks. Never heard of that before!
The DC-9-50 Kit
The kit comes in a pretty plain black box labeled DC-9-10/20/30/40/50 with a sticker which tells you which version of the DC-9 and which markings are included.
History and Facts
The trailer depicted here is my research is correct is a Renault UK trailer that is in captured German service the trailer were used and obtained during the fall of France, about 3000 UE and UE2s had been captured by the German Wermacht.
What's in the Box
- 6 sprues of grey plastic
- 2 photo etch frets (1 for trailer and 1 for the jerry cans)
The Build
Let me start by saying this was a fun build. It started out as an in box review but the model looked so cool it ended up getting built. You start by assembling the suspensions and the running gear. Do not glue part Ga 5to the leaf springs this will allow you to tip the trailer later to suit which ever vehicle you are going to connect it to. I also did not glue the road wheels bogie units to Ga 5 until after the model was assembled and again was to allow the trailer to pivot as mentioned.
History and Facts
T-90MS is a modernized version of the T-90 main battle tank (MBT) built by Uralvagonzavod. The tank is being proposed for the Russian Army and potential export customers. The tank was first demonstrated during the Russian Expo Arms in Nizhny Tagil in September 2011. The capabilities of the T-90MS were also exhibited at DEFEXPO 2012 in New Delhi, India, as well as IDEX 2013 in Abu-Dhabi, UAE. The T-90MS tank will deliver enhanced combat capabilities. The tank offers superior fire power and protection than that of its predecessor.
RES-IM has recently released several sets of replacement wheels for modern aircraft. Often kit wheels are not accurate representations of the real thing, being rather featureless.
This set provides a very nicely molded set of four replacement tires for the Tornado. The set does not state which Tornado kit it is for and as I only have Hasegawa kits of the Tornado, I don’t know if there are any differences between Hasegawa, Italeri or Revell moldings, but I can say they are a big improvement over the kit tires of my Hasegawa Tornado F3 as shown in the photos. The set consists of two main wheels and two nose wheels. The tires are crisply molded with nice tread detail and outstanding hub detail that really pops out with a light black wash.
Often, the wheels in modern jet kits are either too thin or too thick to be accurate representations of the real thing. Other times they just lack detail or just do not look right and we have to look to the aftermarket for replacements.
This set from RES-IM provides a very nicely molded set of tires for the MiG-21 Fishbed. The set does not state whether or not it is for early or late versions of the MiG-21 and I have not dug out my Aerofax book on the MiG-21 to see if there are any differences, so I don’t know for sure, but I can say they are a big improvement over the kit tires of my Fujimi MiG-21R kit tires as shown in the photos. The set consists of two main wheels and one nose wheel. The tires are crisply molded with outstanding hub detail that really pops out with paint a wash.
The Tiger II Ausf.B, Konigstiger, King Tiger or Royal Tiger, as it was called depending where you were from, was the most powerful tank produced by the Germans. It became operational in July 1944, during the Invasion of Normandy. This formidable tank fought on the Western and Eastern Fronts until the end of World War II.
Hauler is located in the Czech Republic, and produces high quality photo-etched sets for AFVs, aircraft, cars, railway vehicles and resin accessories for dioramas and resin kits.
This set fits the 1/72 scale Revell Tiger II kit, and comes nicely packaged with the two photo etch frets inside individual clear plastic bag. The instructions are folded and everything is stapled to the folded over cardboard backing.