Review Author
Charles Landrum
Published on
Company
Quickboost
Scale
1/48
MSRP
$5.00

Quickboost continues to deliver targeted resin details; designed to improve overlooked aspects of a model, for a wide range of subjects.

Revell in their line of A-6 and EA-6 kits provides only a late style probe – this one piece replacement part provides the more correct early style. The detail is crisp and the probe well shaped; the modeler only needs to remove the resin pour piece at the tip. Recommended.

We thank Aires Hobby Models and Quickboost for the review sample.

Review Author
Charles Landrum
Published on
Company
Quickboost
Scale
1/72
MSRP
$3.50

Quickboost continues to deliver targeted resin details; designed to improve overlooked aspects of a model, for a wide range of subjects.

This is a one piece set which provides a replacement for a straight refueling probe on the Fujimi A-4. It provides a clean one-piece replacement for the A-4 without the worry of misshaping the probe or the shaft while removing the mold line. Plus this resin is a bit more durable than styrene and therefore subject to less breakage. The detail of the probe is amazing. Recommended.

We thank Aires Hobby Models and Quickboost for the review sample.

Review Author
Jack Kennedy
Published on
Company
Dragon Models
Scale
1/72
MSRP
$28.00

To my knowledge there were very few 1/72 scale Gloster Meteors produced so it came as a very welcome offering by Dragon.

Upon opening the box, I was impressed with the molding of this kit. The details were very fine and crisp. I consulted my research books and decided to use a white scheme, which was only used on 3 F.3 aircraft.

Assembly was pretty straight forward. The cockpit was very complete; was painted in black and was not very difficult to do. The landing gear assembly in Step 1 was a little confusing when gluing parts B-3 and B-2. I knew that the Meteor was somewhat tail- heavy so I added a load of fishing sinker shot. I don’t know how much weight I added but next time I build a Meteor, I am going to add a brick as mine still became a tail sitter.

The fit on the wing assembly was very good with only a little filler needed at the upper wing root. After the wings were fitted the flaps, landing gear and landing gear doors were added.

Book Author(s)
Jacek Jackiewicz
Review Author
Phil Peterson
Published on
Company
Atelier Kecay
MSRP
$49.90

Mention “hack” in today’s society and most people think of something to do with computers. Mention the same word to aircraft modelers and we think of utility aircraft such as Norsemans, Bobcats, Piper Cubs, etc.

”Hacks” is the story of those aircraft used by the Bases and Groups of the Eight Air Force in England during WWII. The book has a soft cover with the complete text in English and consists of 132 pages, 267 photos and 195 color profiles. Besides the more common utility type of aircraft, hacks included War Weary Thunderbolts and Mustangs, Bostons and Forts and many other types. These are details with at least one picture, a profile and a little bit of data.

The book starts out with a numerical listing of the USAAF stations in the United Kingdom between 1942 and 1945. There are 360 bases listed.

Book Author(s)
Lucien Rousselot
Review Author
Jack Kennedy
Published on
Company
Casemate Publishers
MSRP
$129.95

As a painter of military miniatures I welcome any new book on uniforms. Since my field of interest is the Napoleonic Era, this book by Casemate was most welcome. When John Noack offered it, I jumped at the chance to review it. I was not aware that it was written by the most renowned expert on the uniforms and history of the Napoleonic Era.

When I fist started painting figures of the Napoleonic period, I was taken by the beautiful prints by Lucien Rousselot. At that time they were very expensive and I could only afford a few. Now Casemate has chosen to print all of his works in one book. To someone like me, it was like finding the Holy Grail.

The book in s very large format (11.75” x 8.25”) hardcover book printed on beautiful glossy paper stock. It even has place markers.

This book is broken down into many sections showing the Infantry, Cavalry, Artillery Staff, Marines, Imperial Guard, Aux Corps and many more.

Review Author
Dick Montgomery
Published on
Company
TSDS
Scale
1/55
MSRP
$15.89

TSDS makes products designed for the Sci-Fi modeler and the decal set for the Moebius Moon Bus is just one example of the excellent quality for which TSDS is known.

The decals are advertised as color water-slide decals and indeed they are both colorful and use the traditional dunk-and-slide application technique.

The decals are printed on a single sheet, approximately 5x9. The markings are clear and crisp. Since the entire sheet consists of one large piece of carrier film it is important that each decal be removed from the carrier sheet with the “cut” lines being as close to the actual marking as possible.

The decals responded very well to a short dip in water and none were damaged in the application process even though I handled some of them rather roughly. For all intents and purposes one can apply these decals in the same fashion as one uses for those decals that are supplied in any typical model kit.

Review Author
Dick Montgomery
Published on
Company
Just an Illusion
MSRP
$29.95

JAI produces a growing number of lighting sets for the Sci-Fi modeler, and for general modeling purposes. In conjunction with a recent review of the new Moebius Moon Bus, JAI provided their “Moon Bus Lighting Kit.”

Contained in the package were:

  • two “on/off” slide switches (6 pole)
  • two LEDs and wiring already attached
  • one overhead lighting strip with wiring already attached

The on/off switches are “micro” switches, which means that they are very small and perform in the same manner as a typical light switch in your home, with the exception that the on/off lever “slides” back and forth rather than being toggled.

Review Author
Dick Montgomery
Published on
Company
Moebius Models
Scale
1/55
MSRP
$40.00

From the Editor: The following is submitted by fellow IPMS Member Clyde Jones regarding addition of mentioned lighting set to model:

"LEDs ARE polarized, just like batteries. Connect them ”backward” and they not only don’t light, they slowly go dead. Or not so slowly. The light strip is not polarized." (Added May 2011)

I built my first Moon Bus in 1969 and that model still resides in my display case. Because of my fascination and interest with models rooted in “2001: A Space Odyssey”, it was with great anticipation that I awaited the arrival of the recently released Moebius Moon Bus and I purchased a copy from the local hobby shop as soon as it arrived. When Moebius offered a kit to IPMS for review purposes I was pleased when it found its way onto my workbench and I have thoroughly enjoyed the experience of building a 2nd Moon Bus some 41 years after having completed the first one.

Book Author(s)
Mark Stille, illustrations by Ian Palmer and Howard Gerrard
Review Author
Steve Zajac
Published on
Company
Osprey Publishing
MSRP
$17.95

Osprey Publishing’s latest monograph (Book # 31 in their Duel series) focuses on the largest World War I battleships, the Dreadnoughts, and the epic 1916 clash between the Royal Navy's Grand Fleet and the Kaiser's High Seas Fleet. Author Stille (CDR USN ret.), makes the technical material understandable to the layman, and is ably assisted by the illustrators, whose drawings and maps clarify the ships’ layouts and the battle tactics. I read the chapters in order, and found them well organized, with the climactic Battle of Jutland saved for last. The reader, depending on his previous knowledge of the subject, may choose any particular chapter of interest. The book is an excellent starting point for naval history buffs, war gamers and ship modelers. I selected the book to learn more about World War I naval history, and for info on building a dreadnought ship model in the future.