The IRIS-T (infra-red imaging system - tail / thrust vector controlled) is a heat seeking missile developed by a consortium of European countries as a replacement for the AIM-9 Sidewinder. The program was led by Germany, but included other NATO countries such as Greece, Italy, Norway, Sweden and Spain and the IRIS-T has been exported to several countries such as Austria, South Africa, Saudi Arabia and Thailand. The IRIS-T became operational in 2005 and is carried on the Eurofighter Typhoon, F-16 Falcon, F/A-18 Hornet, Tornado and the Gripen

Trumpeter has issued two versions of their 1/32 A-6 Intruder which was on many peoples most wanted list. While the kit is expensive, it is well done, well detailed and builds into a great replica. Of course that doesn’t mean there is not some room for improvement. While the aftermarket has been slow coming, Eduard has issued sets for the A-6E TRAM version to spice up several areas of the kit. This set upgrades the under carriage and wheel wells and contains one large fret of photoetch parts for the kit.

All three wheels wells are addressed and we can take a look at the nose gear well first. This is fairly well appointed in the kit but sidewall detail is lacking on the aft bulkhead. Eduard includes a very nicely done fix for the bulkhead and also half a dozen enhancements for the nose gear well which will add to the detail.

IPMS USA is grateful to Eduard for kindly providing yet another magnificent example of one of their new items to review, and to the IPMS USA reviewer corps leaders for sending it to me..

This add-on release is designed for the new and vastly improved 1/48 ME-109 series. This propeller and spinner set is designed to be used on the ME-109G-6, but also works on the G-5 and probably others.

The six-part set (including the prop installation Jig) makes easy work of a tough task. The spinner is better defined than the kit plastic, as are the propellers and the hub and backplate. Also included is a prop shaft with a highly-detailed castellated installation nut and hollow gun tube. This would be a great set for a diorama!

I believe in the past few years Revell has offered a few of these pre-finished model kits in order to stir the modeling beginner’s pot. First they did this with the NASCAR Snap kits and most recently with offers like the 2017 Chevrolet Corvette. Confronted with no serious painting task to do and well pre-finished body, these kits should stroke the modeling urge of just about any entry level modeler.

This 2013 Dodge Challenger in Foose motif should be a popular subject among muscle car fans sporting Foose custom wheels, Foose custom graphics and sharp two-tone Sublime Green and Gloss Black paint job.

Parts Count (45 total parts):

This set in designed for Trumpeter’s new Su-24MR “Fencer E” and includes masks for both the clear parts and the wheel hubs. The masks for the clear parts include two part masks for each of the canopy hatches which are nicely curved to match the contours of each hatch. They also include masks for the inner edges for each side of the windscreen, leaving the centers open to be filled in with liquid mask, or as I did with scrap masking from the edges of the set. There are also three small masks for the windows in the ventral strike camera fairing. All of the masks fit great and will make painting the clear parts much easier. I am going to see if I can reuse the hatch masks on the insides of the hatches by swapping sides with the masks after painting.