My love affair with the A-6 began one summer day when I was a boy. Two A-6 Intruders came screaming up the Connecticut coastline while we were at the beach. I suppose they were on a training flight out of the Grumman factory a short distance across Long Island Sound in Calverton NY. Fast forward a few years to 1973 and I had recently arrived at my new duty station of MCAS Cherry Point NC. There on the flight line were A-6’s, lots of them!! Although my squadron were flying TA-4Js Skyhawks, the Intruders next door fascinated me. The bomb loads were staggering and the all-weather capabilities unmatched. Marine A-6’s are the things of legend and to a young Marine the group I was assigned to, MAG-14 had a nice range of aircraft assigned, including the A-6.

Unboxing

Unfortunately I lost the picture of the unboxing, but this kit comes with 7 sprues molded in grey, 2 clear, black vinyl tires, a small photo-etch and a small decal sheet. First impressions- this kit is very detailed and clean. By clean I mean very minimal flash to remove at all. The instructions have extremely clear pictures and type.Very easy to follow and know what you are looking at.

Assembly

I am highly impressed by the detail on this! The console in the cab even has cup holders! So many pieces! I would advise you to take your time and enjoy this kit!

In all honesty, this kit is probably a bit beyond my skill set. With my shaky hands and diminishing eyesight, the small details of this kit are a bit more than I can handle. Not to say I am not enjoying it. I am just going to say that as happy as I am with it, I know some other model builders will be able to do a much better job than I did.

Detail and Wonder (D&W) is a new aftermarket company; They currently list The F-35, F-4, and recently the F-16 as target kit improvements for their products, (Tamiya F-35A, Meng F-4E, and Tamiya F-16, which means it will work on the Kinetic copy) producing landing gear with integral Wheels/tires/struts, Exhaust Nozzles, and some intake/exhaust FOD (Foreign Object Damage) prevention plugs. The subject of this review is the F-35 Augmentor Exhaust and intake/exhaust plugs… IPMS USA is grateful to D&W for providing us this set to review!

The packaging is frugal but effective; no parts breakage noted on my set, and opening them revealed one exhaust nozzle and three separate intake/exhaust plug parts encased in protective foam inserts to prevent movement and crushing.

The printer resin is an almost-black color, and the wheels are medium gray.

Arma Hobby has produced this kit for its tenth anniversary. Following the successes of its previous 1/48 scale Hurricanes (Mk IIc, Mk IIb, and now a Sea Hurricane Mk IIc), this “Anniversary Special Edition” Mk IIc comes with new parts. The Hurricane Mk IIc differs from the Mk IIb with the armament being four 20mm Hispano cannons instead of twelve .303 Browning machine guns.

From the Arma Hobby Website:

At the beginning of November, Arma Hobby celebrates its 10th anniversary! On this occasion, for modelers, we have prepared a special, jam-packed anniversary model kit - Hurricane IIC "Jubilee" in 1/48 scale.

This is a set with marking schemes from Operation "Jubilee" - the Allied Dieppe landing, with a box filled with a full set of 3D-printed resin accessories. This unique kit is released in a small, limited series for the 10th anniversary of Arma Hobby and will not be reissued!

These J-79 Exhaust Nozzles (for the Kinetic Kit No. 48083 primarily, and K48090 and K48093, and most likely any F-104 Starfighter that utilized the J-79 General Electric axial-flow turbojet engine) are a recent release by Chinese manufacturer Fab Scale. Fab Scale’s online presence is hard to find with the provided QR codes stating that the site can’t be reached). The same is for the supplier, Warspite Model Company. It is a shame as this three-piece exhaust nozzle set is exquisite!

The sturdy box protects the three pieces, each in their own protective Ziplock pouch. The instructions are the box art which shows the arrangement of the three parts. Removal of the 3D supports with a razor saw is easy and, after a quick wash, ready for assembly.