Triple Ejector Rack A/A37b-6 (Ter-7)

Published on
Review Author(s)
Scale
1:48
MSRP
$17.00
Product / Stock #
RS48-0340
Base Kit
A-4 Skyhawk (wing or centerline), A-6 Intruder, A-7, S-3 and F-4. The other aircraft listed this is set works on are not specified in the instructions.
Company: Reskit - Website: Visit Site
Provided by: Reskit - Website: Visit Site

Founded by modelers, Reskit sets the standard for aftermarket accessories. Reskit’s product line keep expanding exponentially and no end in sight for what they keep offering. This Triple Ejector Rack (TER) is another fine example of selecting a much-needed subject and producing the product at the right time. This set is designed for a large family of Cold War aircraft. These TER’s look similar to ones used on the F-16 (TER-9) but have more of a “blunt” nose.

Packaged in a sturdy box, the contents include five 3D printed main TER main bodies, groupings of three small parts like lugs and guards. Also included is a small decal sheet and double side printed, full color instructions. The resin prints include a protective structure or cage around the printed parts.

As with all 3D printed parts, care must be taken removing the parts. The main body part was not too difficult to free all the supports. As for the smaller parts, especially the “U” shaped guards can be tricky to get free. The good news is there are at least two extra parts just in case you break one or lose a part as happened to me.

Taking a close look at the printed parts, I could barely see any build lines. The first thing you will need to do is determine what aircraft (and what location) you plan on adding this set to. The instructions mention specific configurations for the A-4 Skyhawk (wing or centerline), A-6 Intruder, A-7, S-3 and F-4. The other aircraft listed this is set works on are not specified in the instructions.

The total part count per assembly is five items, main body, two mounting lugs and two guards. Once assembled, just a light coat of primer is needed to seal everything in. For my version, the TER’s will be white so just a very light coat of white paint was needed. Painting the rest of the details, adding panel line wash and decals wraps up the work. The fine details printed were easily discernable and easy to paint. The depth of a few of the holes and pockets really helped accept paint. Note that you will see some TER’s with paint chipped on the nose section so check your references.

Trying to find a model kit with this style is nearly impossible so finally someone came to the rescue with these fine little items. I highly recommend this set to get past the chunky sets offered in most injection molded kits.

I would like to thank Reskit and IPMS/USA for this set to review.

Product

Reviewer Bio

David Horn

I have been building models since at least 8 years old and with a brief break after high school, model building started again late in college. My preferred subjects are aircraft of all eras and scales but a majority of my builds are 1/48 scale. I am the son of a USAF navigator who flew tactical airlift in Vietnam then his last 8 years he served at Altus AFB where he retired. My love of aircraft comes naturally and try to build subjects that I have a personal connection to. My day job parallels the hobby where I design full flight simulators ranging from small corporate jets, military fighter jets to the C-17. I hold a commercial pilot certificate and fly as a volunteer with the Civil Air Patrol. I really enjoy flying cadets, passing on the love of flight and inspiring future aviators.