Atlantis Models has done it again bringing back the classic Pie Wagon Custom Show Rod by Tom Daniel from the crypt. It’s a skill level 2 number M6738 MADE IN THE USA kit and has around 40 pieces in 1:24 scale kit. Originally released in 1968, the kit features decals refreshed by Tom’s son, Kelly Daniel.

The model contains 70 pieces molded in the original purple, with clear, chrome and brass plated parts. It also features rubber tires, waterslide decals and the original sell sheet. The decals are great and really set off this, “One Cherry Ride” model! Speaking of decals, I also added some tire script decals from the aftermarket for emphasis. Final dimensions are L-6½”, W-3½” & H-3¾”.

I’ve always loved Tom Daniel kits, and this one hasn’t been seen since 1998. It would look great right out of the box and could be built in an evening.

It is an old mold design, so you may want to clean up any parting line flash or ejector pin marks. The parting line is very light, but the front wheels have some flash in the spokes that are easily removed with a hobby knife. Overall, the model is very basic and easily constructed, but it does have some areas that might be an issue for newer builders. The upper body fits onto the lower body all around the outside ridge with some small posts. For a better joint, use some C/A glue along the ridge and work your way around the perimeter, making sure the gap is closed. Additionally, some front suspension parts have small glue points. Thread the tie bar through radius rods and glue the rods to the front axle. Then add the front axle to the body, then add the radius rod mounting plates to the body.

You’ll have a blast building this kit again, so get one while you can, as this is a limited production kit.

Profuse thanks go to Atlantis Model Company for providing the kit and the IPMS for providing a place for the review.