This is an interesting set from Brengun as it allows the modeler to replicate the large internal fuel tank sometimes carried by the Mi-24 Hind. The set has 6 parts, consisting of the tank, what appears to be a spigot or filler connection, and 4 parts that make up the cradle the tank sits on. The parts are all crisply cast. However, I did discover a few pinholes on the underside of the tank and the ends of the cradles that needed to be filled and smoothed out when I put on the first coat of primer.
As with Brengun’s other resin accessory kits, the first step is to remove the parts from the pour stubs. A sharp razor saw makes quick work of this. I next assembled the cradle with superglue and then set it aside to dry and harden. Before the superglue had set completely, I test fit the tank onto the cradle to ensure that everything lined up. Next, I attached the spigot/filler part to the appropriate end of the tank, making sure it was aligned as shown in the instructions.