In the months before the Battle of Lexington and Concord, Pennsylvania and Virginia had disputing claims over the trans-Appalachian area that would become southern Ohio and Kentucky. This area had been ceded by the French at the end of the French and Indian War, aka the Seven Years War. Of course, the native people, the Shawnee, Mingo, and their allies including members of the Delaware, Miami, Ojibwe, Kickapoo, Ottawa, Potawatomi and Wyandot, also contested the rights to his land.

In time, the colonists allied with each other and sent militias to take the land under the leadership of Virginia’s governor, John Murray, 4th Earl of Dunmore (Lord Dunmore). The regular armies, i.e., the Redcoats did not participate to any great degree in this campaign which culminated in the Battle of Point Pleasant at the convergence of the Ohio and Kanawha Rivers near present day Charleston, WV.

Model Art Magazine is a monthly magazine that covers aircraft, armor, ships and car modeling. Model Art started releasing magazines in 1966 and has evolved from there over the past forty eight years.

The October issue starts off with several small articles which include the IJA/N Airplane Illustrated and a build article on the Tamiya 1/35 WW1 British Tank Mk. IV Male. This features a beautiful diorama and photos of a Mk. I, Mk II and Mk. IV and a opened up MK. IV.

The main article this month features the IJN Carrier Akagi shown through models in the different configurations of it's career. This article consists of thirty two pages and utilizes several 1/700 scale models and one 1/350 models. Most of the configurations are of the single flight deck, but one model is of the "Three flight deck" version. This aricle consists of multiple color photos and many helpful tips on making the most accurate looking Akagi.

Need a little something to spice up that 1/48 scale plane on its base? Aerobonus to the rescue with a set of four FOD (foreign object debris) buckets. The set is one casting of four buckets with a piece of wire to form the handles and decals.

Assembly is basic with the modeler cutting the bucket free and adding the handle. I did use a drill and pin vise to open the handle holes slightly. Cut the wire and bend like a handle and your done. the color call put is for blue grey. I used medium blue gray from Testors and then gloss coated for the decals. The decals come in white or black lettering and I chose the white and they went on well. A quick flat coat and then paint the handle silver and we're done. Just that quick and easy.

The set is simple, well made and would make a great addition to the base or a diorama. Recommended. My thanks to Aires for the chance to build and paint these great little buckets,.

Quickboost provides one set of Dornier Do 217 exhaust stubs. Of note is the re-sealable packaging that Quickboost uses that makes the parts easy to review and then stuff back into the package securely. There are no supplied instructions; you simply swap out the kit provided plastic parts with the new Quickboost replacements. These Quickboost parts are specific replacements for the kit parts found in the Monogram Pro Modeler’s Do 217E-5 (85-5954), Revell’s Do 217E-4 kit (85-5526), and Revell’s Do 217E-5 (04557)

Quickboost has molded the exhaust stubs perfectly in light grey resin with no apparent bubbles. The Quickboost exhaust stubs have no mold seams to sand off along with the superior detail for the exhausts. Be very careful removing the parts from the resin block. I used a photo-etched saw along with a couple swipes of a sanding stick to have great looking parts. Test fitting revealed no discernable differences that should cause any problems compared to the kit parts

Monograms' AT-6/SNJ kit has been around for quite a while. The plane trained many flyers and was used for many years with some still being flyable to this day. Yellow Wings, who specializes in decals for planes between 1930 and 1942 has come out with a new set for USMC SNJ-3's from 1942.

Included in the package are two complete decals sheets with markings, color bands and insignia for two aircraft. They are printed by Microscale and have great color and register. Wing Walks are also included for both aircraft. Next is a full color sheet showing the color and markings along with aircraft performance. Lastly, there is the info sheet detailing the history, band information, prop color info and more along with a guide to specific paints.

The planes represents on this sheets are: