Thanks again to Ross at SAC for providing one more of his new metal gear for the new kits; The IPMS USA on the reviewer corps appreciates your continuing to provide us review items… and as usual, thanks to the IPMS leadership for sending it my way to review!

This is an improved version of the kit’s gear; it is essentially a “form/fit/function” replacement, with the exception of the fact the SAC gear greatly improves on the kit parts…. Let’s review!

HAD Models is based in Budapest, Hungary and has an excellent selection of laser cut wood, photoetch and resin parts. This particular piece is a 1/32nd wheel chock for Russian planes. This is four individual pieces of photoetch. The main part is bent six times to get the main shape. The back piece is bent to shape and fit into its spaces.

I used a Hold and Fold for the majority of the bends and rolled the back piece around a wooden dowel to get the approximate shape. I let the glue dry thoroughly and the started trimming the bent face piece back. When it was close, I sanded the brass parts back until I could putty them smooth. It then primed with Alclad gray primer. The pictures show a nice orange color so I used Italeri international Orange and got it nice and glossy. I added a couple left over decals top represent the numbers shown in the pictures. A quick flat coat followed by some scratches and wear marks and the chocks were done.

I wanted a small pickup to haul around some of my resin parts and got a real winner with Revell’s Datsun Off-Road Pickup. Very little flash and the parts fit very well together. The instructions are a 12 page document that provides the part number with a description and a chart showing what part should be painted what color.

After a massive scratch building job on my 1/35th scale Werner’s Wings MH-47E I needed something simple. Quick. Easy. I needed a Tamiya kit.

Many of you may remember the old Bandai 1/48th scale series of military vehicles. Until Tamiya revived the scale with modern renditions in this scale Bandai was the only game in town for 1/48th scale armor. One of the unique vehicles that Bandai put out was the BMW R-75 motorcycle with sidecar. Finding these was always a pain. I built one of them a long while ago and thoroughly enjoyed it. Could Tamiya do better? That is a rhetorical question.

Packaged in a sturdy 6 x 9 cardboard box with typical quality box art the modeler is treated to a single sprue of light tan plastic wrapped in plastic along with a small decal sheet. The instructions are printed on a long scroll of high quality paper in typical high quality fashion. There is a small decal sheet of license plates and some unit emblems.

Wow what a fun little kit to build of a modern USMC war machine. The most interesting thing about the model is this kit can be built as a snap/or press tite build. No glue is actually necessary to construct this model.

Tenax 7 was used to cement all the parts and reacted well to the medium density Hasegawa plastic. Bondo 907 was used for the few seams that needed filling and again worked well with the Hasegawa plastic. I used Testors Clear Parts cement to attach the canopy and AV Plastic Putty for final seam fills and touch ups. The Model was painted overall using both Model Master Enamels and Tamiya Acrylics.

Every part was well and fully molded with no sink marks or pin marks visible. The only clean up on the parts was at the sprue attachment points.