Review Author
Dave Koukol
Camden Koukol
Published on
February 10, 2020
Company
Revell, Inc.
Scale
1/32
MSRP
$24.95

Background

A familiar sight to all who have traveled the highways and byways of the United States is the “semi” tractor-trailer truck hauling goods from coast-to-coast. One of the leading manufacturers of the “tractor” portion is Freightliner, a subsidiary of Daimler AG established in 1942.

The Kit

Big truck, big box, big model – lots of “wow factor” for the young builder! Molded in light blue, white, black, and clear, the kit comprises of 102 parts. A sheet of peel-and-stick decals and instructions are also included. Copyright data on tractor and trailer parts indicate 1979 and 1980 vintage of the original tooling, respectively. As expected with tooling over 3 decades in service, there was quite a bit of flash along mold parting lines which required some extra effort to clean up prior to assembly.

Review Author
Steve Collins
Published on
September 1, 2014
Company
Quickboost
Scale
1/72
MSRP
$6.50

This set from Quickboost is designed to replace and improve upon the kit parts for Hobby Boss’s Mi-2 Hoplite. The kit air-intake cowling includes two holes through which you place the air intakes. It also has a molded-in intake in the upper center with a screen engraved in it. The Quickboost parts feature the cowling with two hollowed intake tubes cast in, along with an opening at the upper center. You get a photoetch screen to place over the opening, along with a spare screen. While a bit more fiddly than the kit parts, the level of detail is worth the slightly greater effort. Recommended.

My thanks go to Aires Hobby Models for producing and providing the parts for a rather esoteric subject and to IPMS/USA for allowing me to review them.

Review Author
Steve Collins
Published on
September 2, 2014
Company
Quickboost
Scale
1/72
MSRP
$6.50

This set from Quickboost is designed to replace and improve upon the kit parts for Hobby Boss’s Mi-2 Hoplite. It includes part from two other Quickboost sets, as well as FOD covers (Foreign Object Damage) for the intakes and exhausts. The kit’s air intake cowling includes two holes through which you place the air intakes. It also has a molded-in intake in the upper center with a screen engraved in it. Additionally, there are two exhaust ports on each side of the engine cowling. The Quickboost parts are the cowling with two hollowed intake tubes cast in, along with an opening at the upper center, plus four properly shaped and thinned exhausts. The neat addition to this set is the FOD covers for all these openings, along with photoetch pull handles for them. You also get a photoetch screen to place over the opening in the air intake cowling, along with a spare screen.

Review Author
Steve Collins
Published on
September 2, 2014
Company
Quickboost
Scale
1/72
MSRP
$4.99

This is another of Quickboost’s more-or-less drop-in replacements for kit parts. In this case, it’s the exhausts for Hobby Boss’s Mi-2 Hoplite helicopter kit. The parts in the kit are hollowed out for you already, but the walls of the tubes are a bit thick. The replacement exhausts from Quickboost are direct replacements for the kit parts, but with thinner walls. They fit right into the sides of the cowlings as if, well, they were made for them. They also appear to be slightly more accurate in shape than the kit parts. The kit parts are oval shaped, whereas the prototype exhausts (and the QB parts) have a slightly flattened side to them. This set is definitely recommended as a time saver.

My thanks go to Aires Hobby Models and Quickboost for providing the parts for a rather esoteric subject and to IPMS/USA for allowing me to review them.

Review Author
Chris Smith
Published on
September 2, 2014
Company
Dragon Models
Scale
1/32
MSRP
$64.00

Background

On November 27, 1944 a 21-year-old Captain named Leonard “Kit” Carson was leading a flight of Mustangs on a mission to strafe oil reserve stores at Leipzig. As they approached the area of Magdeburg, Germany a large group of 50-75 Fw190s was spotted. The squadron dropped their long-range tanks and turned to attack the Focke Wulfs head on. In a series of turning, diving and climbing dogfights Carson managed to down five of them. By wars end, then Major Carson would fly 115 combat missions and score 18 ½ aerial kills with an overall score of 23 with ground kills included. Carson flew four different Mustangs called “Nooky Booky” including P-51K 411622 depicted in this review. I don’t think anymore of an introduction is needed for this legendary aircraft.

Review Author
Roger Rasor
Published on
September 4, 2014
Company
The Great War Aviation Society
MSRP
$13.50

Cross & Cockade International is the quarterly publication of a non-profit UK based organization known as The First World War Aviation Historical Society. This organization has been publishing these journals since 1970 with the objective of furthering the study of First World War Aviation History. The second journal of 2014; Volume 45/2 (Summer 2014) continues the organization’s mission by providing a wealth of information on varied WWI aviation subjects. The cover of this journal features a painting by Allan Forbes of a pair of 64 Squadron de Havilland DH5s attacking ground targets. It serves as a precursor to an interesting eight-page feature article about the 64 Squadron and the DH5s they flew.

Following an Editorial page, the contents includes:

Review Author
Dave Morrissette
Published on
September 5, 2014
Company
Scale Aircraft Modelling
MSRP
$7.35

Each issue of Scale Aircraft Modeling has been a basic design and format but they changed it up with the last issue. In this issue, there are five feature articles, an Aviation in Profile piece, and five Compact Build Reviews.

The Feature articles for this issue start with Jay Laverty's build review of the Trumpeter 1/48 Westland Whirlwind Mk I. The kit is built and shows no issues. The majority of the article concentrates on the superb weathering done to replicate V HE which showed a lot of chipping. Mr. Laverty also corrects the markings, adds Barracuda cast wheels and uses ComArt's excellent weathering set. The result is spectacular!

Next up is Mr. Laverty's build of Planet models 1/48 Westland Welkin. This is a good size all resin kit and it is finished superbly in a Medium Sea Grey scheme. There are also some excellent tips in working with resin kits.

Review Author
Dave Morrissette
Published on
September 5, 2014
Company
Dragon Models
Scale
1/24
MSRP
$8.99

Dragon Models have gotten license for several movies one of them is the Avengers/Iron Man series. This is in their 1/24 series and is the Iron Man Mk 42 Prehensile Suit. This suit is noticeably more gold colored than the more common suits. The kit is seven pieces for the suit with only the back and front torso needing glued together. A base is included and also has an attachment of the flames that are coming out of the left foot.

Review Author
Dave Morrissette
Published on
September 5, 2014
Company
Eduard
Scale
1/72
MSRP
$23.00

Eduard's set 73467 is meant to detail Tamiya's 1/72 A6M2b. The set addresses the cockpit, the wheel wells, the engine and adds dropped flaps. This is done with two superb frets of photoetch. One is the standard set and addresses the flaps and wheel wells and engine with 61 parts. The second fret is colorized and covers the cockpit and miscellaneous parts with 66 parts. All are beautifully done.

Starting with the cockpit, there are three things that make a huge difference. First is the superb seat. it is scale thin and has the needed holes. It takes a little roll to get the right shape. Added to that are fantastic seat belts. Second are the side walls and panels. it is preprinted and also adds to the cockpit. Last is the instrument panel which is a little work of art. All of these fit well and as you can see by the detail shots,. they make the cockpit look fantastic.

Review Author
Pablo Bauleo
Published on
September 5, 2014
Company
Dragon Models
Scale
1/35
MSRP
$59.99

The Sd.Kfz. 10 was a German half-track used as a prime mover for artillery pieces or special applications, mainly in the early years of World War II.

Dragon Models has multiple kits of their “basic” Kfz.10 kit, with some including additional parts to make the extra-armored versions or with added parts for an artillery piece, as in this case.

Upon opening the box you find 15 sprues (one clear), two bags with individual links for the tracks, two photoetch frets, a set of masks for the windshield, and a small decal sheet for the three marking options, all representing Eastern Front vehicles. The instruction booklet follows the typical Dragon style, printed in black, white, and blue, with a total of 15 steps for the half-track and 12 steps for the artillery gun. There are no figures in this boxing, but with the large selection of Wehrmacht figures available, that is not an issue in my opinion.