Review Author
Marc K. Blackburn
Published on
March 7, 2014
Company
Aoshima
Scale
1/72
MSRP
$29.89

Aoshima has released a number of vehicles of Japanese Ground Self Defense Force (JGSDF), including this little gem. I don’t know anything about the ground equipment of the JGSDF, but this is what’s included as a description, “JGSDF 31/2 ton Fuel truck is mainly assigned to Logistic Support Regiment, utilized for fuel supply to tanks, armored vehicles, and other various vehicles in the field. It has “Ki” (danger) marking just like civilian vehicles.” This is one of a series of service vehicles in the JGSF that Aoshima offers in 1/72 scale.

Review Author
Rob Benson
Published on
March 7, 2014
Company
HK Models Co.
Scale
1/32
MSRP
$95.00

Mr. Neil Yan and the wonderful folks at HK Models deserve tremendous thanks for providing this review kit. I appreciate their work to bring new and unusual subjects to the scale modeling community. The IPMS/USA Reviewer Corps also deserves thanks for giving me the kit to review. I am only one member of a large staff in the Reviewer Corps, and I appreciate all the tireless team and individual work that goes into getting the material out to be reviewed and the finished write-ups published.

The Meteor appeared late in WW2 as a counter to the V-1 threat to England. It was the first operational Allied jet fighter, operated primarily by the RAF throughout its history. The design of the Meteor might seem primitive by today’s standards, but it truly was groundbreaking at the time. Many versions of the Meteor were developed, including stints as turboprop and ejection-seat test beds. HK Models chose the MK 4 version for their new kit.

Review Author
Andrew Fuller
Published on
February 10, 2020
Company
Revell, Inc.
Scale
1/48
MSRP
$17.00

Manufactured by Mitsubishi Heavy Industries, the A6M5 Zero was a long range fighter aircraft flown by the Imperial Japanese Naval Air Service. Its first flight was on April 1st 1939 and entered service on July 1st 1940. More than ten thousand Zero aircraft were built.

Revell brings us another easy and fun to build kit. Being a skill level 2 kit, detail is a bit sparse in the cockpit department. It consists of only a pilot figure and a decaled instrument panel. Regardless, of the lean detail, this is a great little kit. The Zero is moulded in grey, and panel lines and detair are raised.

The kit went together nicely, and the fit of all parts were very precise. Other than some very minor "flash"on a few of the parts, the only predicament I encountered were the 4 small locating tabs on the bottom of the canopy. These locating tabes had to be removed to ensure the canopy had a flush fit with the fuselage.

Review Author
David Wrinkle
Published on
March 7, 2014
Company
Quickboost
Scale
1/48
MSRP
$6.50

Upfront, I want to thank Aires and Quickboost for providing these fine aftermarket bits for our beloved models and to the IPMS USA a big thank you for allowing me to review this Quickboost product.

Admittedly I am proud of the fact I love the stubby World War II fighter. The Rita, Buffalo and certainly the Grumman Wildcat. I have several in my stash including the Hobby Boss and Tamiya 1/48 F4F-4 Wildcats kits.

I snagged the Quickboost pitots for the Wildcat before even looking closely at the pitot tubes. Both kits are F4F-4’s and thus use the stubby angled pitot tube mounted near the port wingtip. No problem here, Quickboost provides both the angled pitot found on the F4F-4 as well as the longer straight version found on the F4F-3’s. Just a quick look at the comparison photos you will see the resin replacement parts are much less bulky and more defined than the stock parts. Unfortunately I don’t have a F4F-3 to compare the longer style pitot.

Review Author
Bill Kluge
Published on
March 7, 2014
Company
Aerobonus
Scale
1/48
MSRP
$12.00

Aerobonus continues to expand its range of pilot/ejection seat combos with this Crusader pilot seated in his Martin Baker Mk7 seat. The arms and head are separate attachments, allowing for some variation with the positioning of each attachment. The detailing of the g-suit and survival vest easily defines these garments as separate from the flight suits. All the belts, straps and buckles are minutely detailed. The separate arms and head allows you to more easily position them after the seats are installed in the cockpit, so that they’re not interfering with the fit, and more realistically seated in the cockpit.

Review Author
Andrew Birkbeck
Published on
March 8, 2014
Company
Meng Model
Scale
1/35
MSRP
$69.95

The 100th Anniversary of the tank going into combat takes place in September 2016, and as this anniversary draws closer I have become fascinated with these first creaking, clattering vehicles of death; part of the first modern industrial war in history. And while the British Army’s rhomboid shaped monsters that took part in that engagement at Flers-Courcelette during the Battle of the Somme were the first tanks to see service, the diminutive French FT-17 can legitimately lay claim to be the great grandfather of the modern tank: the first fully tracked armored vehicle with a rotating turret. And as luck would have it, Meng Models have produced a simply magnificent model kit of this seminal vehicle. Not only is this model exquisitely detailed, it is fully detailed, as it comes with a very complete interior.

Review Author
Andrew Birkbeck
Published on
March 9, 2014
Company
Meng Model
Scale
1/35
MSRP
$79.95
We have not had a new kit of the Leopard 1 series of tanks in decades, so it was good to see the up and coming firm of Meng Models taking on the task of giving the modeler a state of the art kit to add to their collection of late 20th century MBT’s. So how did they do??

What’s In The Box

  • 13 sprues of green plastic parts
  • 6 sprues of brown plastic parts for the link by link tracks
  • 1 sprue of clear plastic parts
  • 1 x main upper hull part
  • 1 x main lower hull part
  • 1 x turret shell
  • 1 sprue of poly plastic wheel caps
  • 2 x rubber track units
  • 2 x PE frets
  • Decals
  • 17 page instruction booklet plus separate 4 page color and marking guide
  • Length of string for two tow cables

The modeler should first start the build process by carefully reading the instructions in order to familiarize themselves with the four different options available in this kit.

Review Author
Pablo Bauleo
Published on
March 10, 2014
Company
Master Model
Scale
1/48
MSRP
$12.50

Master Model from Poland specializes in metal turned parts for aftermarket kits. In my personal option they are among the best in the market. I really like their products. This set is devoted to the weapons of the Hawker Typhoon. There are two options for that kit in 1/48 scale: Hasegawa and Monogram. This set can be used with all of the above, with different modifications in each case.

For each kit, you are instructed to drill holes in the wings for the fairings and to replace the plastic parts with the metal ones. You are also provided with a small photo-etch fret to dress up with wing area around the cannon fairing. Be aware that the outer and inward cannon fairings have different sizes and should not be used interchangeably. The instructions are very clear about which one is each and how to position them.

Review Author
Rod Lees
Published on
March 10, 2014
Company
Hasegawa
Scale
1/72
MSRP
$45.00

Thanks very much to our fantastic supporters at Hasegawa USA for providing IPMS USA yet another of their fine kits for review… we appreciate the opportunity to showcase some of the best models out there!

This is yet another re-release of Hasegawa’s first range mid-1980’s F-18 models. The molds have well-endured the test of time, and no flash is present on this kit. Engraved panels, simplified construction, and an absolutely cool decal sheet await…

Starting with the cockpit, decals are used for the instrument and side-console details. A two-piece ejection seat is provided, and use of the provided aircrew figure is recommended to avoid having to make a harness. A basic control stick rounds out the interior, and no problems will be experienced in construction here.

Review Author
Clarence Wentzel
Published on
March 10, 2014
Company
Hasegawa
Scale
1/72
MSRP
$63.95

Background

In 1972, the Shah of Iran visited the US to evaluate two interceptor airplanes, the F-14 and F-15, for protection of his borders against overflights of the MiG-25. A contract was signed to purchase a number of F-14s due to superior maneuverability and weaponry. As it turned out, the sale of some F-14s to Iran gave Grumman the funds that they needed to continue Tomcat production. The best pilots from Iran came to the US and were well trained in advance of the deliveries which started in 1974. During it’s time in the Imperial Iranian Air Force, IIAF, the Tomcat performed its role well.

In 1979 the Islamic Revolution toppled the Shah and established a harsh Islamic regime. A number of the trained personnel fled but many remained. Once Iraq invaded Iran, many of these former “Shah’s pilots” and technicians were allowed back in service and the Tomcats asserted themselves well against Iraq’s aircraft.