Review Author
Steve Jahnke
Published on
February 10, 2020
Company
Revell, Inc.
Scale
1/25
MSRP
$24.95

The Chevrolet Camaro was Chevy’s answer to the pony car sweepstakes in the late 60’s. Over the years, the “Bow-Tie” boys brought out many exciting and powerful Camaros to do battle with Ford and Chrysler. After a short hiatus in early 2000, Chevy brought back the Camaro in its current retro styling that harks back to the car’s 1969 aggressive styling. Today’s Camaro is truly a state of the art Pony Car, in part because it rolls on modern and expensive independent rear suspension (IRS) components just like its big brother Corvette; engine power ranges from its base 304 bhp V6 engine while V8s are available up to the 6.2 litre 400 bhp L99 engine.

Book Author(s)
Przemyslaw Skulski
Review Author
Paul Mahoney
Published on
June 12, 2012
Company
Mushroom Model Publications - MMP Books
MSRP
$27.00

The latest issue in MMP’s ever-expanding “Yellow” series is specifically dedicated to the North American A-36A Apache.

The first 47 (out of 128) pages of this book are a mixture of text and photos describing the development and combat experiences of the A-36. The first few chapters cover the design and development of the A-36. The following chapters are each dedicated to an individual combat theater in which the “Apache” was deployed. Usage in North Africa, Sicily, Italy, and the Far East are covered. 2 pages are specifically dedicated to a history of the only A-36 ace, Captain Michael Russo. After this, there is a brief discussion of the British evaluation (and subsequent rejection) of the aircraft. The final portion of this section is a technical description of the A-36A-1-NA which includes several photos and technical drawings from the official Technical Manual for the aircraft.

Review Author
Roger Rasor
Published on
June 12, 2012
Company
Master Model
Scale
1/32
MSRP
$6.29

Master Model now has covered all the basses when it comes to turned aluminum pitot tubes for Hawker Hunter models by adding one for 1/32 scale kits (currently, that means Revell or Revell of Germany F.6 or FG.9 kits). In this larger scale, the addition of a more accurately proportioned metal pitot tube is almost a must if the builder is striving for accuracy. The photo below of the metal part compared to the injection molded kit part tells the story. Placing it next to the kit part clearly shows show how nicely the tapered Master Model metal looks by comparison.

The Master Model pitot tube can be attached with super glue or epoxy cement. Then, a little filler may be needed to blend the hole in the wing’s leading edge after anchoring the smaller diameter metal tube. The thin metal tube will likely survive an occasional bump or two but, because it is aluminum, it may bend if it is bumped too hard.

Review Author
Howie Belkin
Published on
February 10, 2020
Company
Dragon Models
Scale
1/72
MSRP
$21.95

The Panzer III design was awarded to Daimler-Benz with production beginning in 1937. Several German companies would be engaged for full production. The Ausf N was the last variant, with many converted from previous variants. Armed with the short-barrel 7.5cm KwK 37 L/24 cannon and armored with the extra armor on the Ausf J, L, and M variants, the Ausf N performed well in Europe and North Africa, especially as infantry support. The Panzer III chassis lived on as the Sturmgeschütz III assault gun, which became Germany’s most-produced armored vehicle. The Panzer IV took over the role as Germany’s main battle tank.

Review Author
Jim Pearsall
Published on
June 12, 2012
Company
Sword Models
Scale
1/72
MSRP
$32.99

I really like the Spitfire. I’ve built almost as many of them as I have F-4 Phantom IIs. So, when the opportunity came to build a Seafire for a review, I volunteered. Does begging and pleading count as volunteering? Anyway, I got the new Sword Seafire Mk XVII, and Brian Baker got the Seafire III.

The Aircraft

The Seafire was a much desired aircraft. The Fleet Air Arm dearly wanted a high-performance fighter for their carriers. Because production of RAF Spitfires was a much higher priority, they got Blackburn Rocs (which were insufficient), Wildcats (Martlets), and Hellcats. The first Seafires were modified Spitfire Mk Vs. As Spitfires evolved, the Seafires changed, too.

Review Author
Brian R. Baker
Published on
June 12, 2012
Company
Sword Models
Scale
1/72
MSRP
$32.99

History

The Seafire was essentially a navalized Spitfire designed for carrier operations with the Royal Navy’s aircraft carrier fleet. At the beginning of World War II, although the Royal Air Force was operating some first class equipment (including Spitfires and Hurricanes), the Royal Navy was equipped mainly with types that were decidedly inferior in performance to what the Luftwaffe had. These types, including the Blackburn Skua and Roc, Gloster Gladiator, and later the Fairey Fulmar, were not in a class with the Messerschmitt Bf-109 or the Focke Wulf FW-190, the planes that would become their adversaries. Although the earlier aircraft were used successfully in some operations, it was clear to the naval commanders that more suitable aircraft were required.

Review Author
Paul Mahoney
Published on
June 15, 2012
Company
Dutch Decal
Scale
1/72
MSRP
$16.50

This 1/72 set from Dutch Decals comprises 2 sheets of silkscreen decals and a folded instruction sheet covering aircraft using the early Dutch insignia.

Each decal sheet measures a little less than 6”x8 1/2”. The first sheet has letters, numbers (in a unique font) in both black and white, as well as serial numbers, data plates, and some rooster decals for use on both camouflaged and silver-doped aircraft. The second is entirely covered with the orange ‘meatball’ insignia of the early Dutch Air Force. Different sized roundels are provided, both with and without a white surround.

Review Author
Pablo Bauleo
Published on
June 15, 2012
Company
MiniArt
Scale
1/35
MSRP
$69.00

MiniArt has released a model of the 1941 GAZ-MM. These trucks are very similar to the Ford A and they were widely used in World War 2 by the Soviet Army.

This model is not a limited run release. There was no flash at all, and the connector gates are small. There are few locating pins and the plastic is a bit soft, so be careful when removing parts from the sprues. I know that by experience, as I managed to damage and/or bend some very small parts when releasing them from the sprues.

You get 14 sprues, including a small photo-etch fret for a total of 371 parts. There is a very small decal sheet, which only applies to one of the three finishing options. Instructions covers 35 steps, not counting sub-assemblies required within several steps. The instructions are a bit vague at moments. Make sure you dry fit all parts and consider looking at the subassemblies in later steps, to be sure you are putting them together right.

Review Author
Dave Steingass
Published on
June 15, 2012
Company
MiniArt
Scale
1/35
MSRP
$9.99

This kit consists of 4 identical sprues molded in light grey styrene and containing 140 parts and a double-sided instruction sheet, which is vital, since the kit has so many options.

4 different configurations of fence and gate options are given in the instructions, but you can make any combination of those options with the available parts. I would highly recommend studying the rear of the box art and the instruction sheet to get the most out of this versatile kit.

Absolutely no flash or warpage was present on any of the parts, which is typical of Miniart's excellent injection molding process. Very fine mold lines are present, and they are quite noticeable on the rounded parts, so a thorough sanding of every piece is highly recommended for the best finish.

Review Author
Rod Lees
Published on
June 15, 2012
Company
True Details
Scale
1/48
MSRP
$18.99

Outstanding detail, great support of the plastic modeling community, etc… all apply to Squadron Mail order and MMD distributors. We at IPMS/USA appreciate and thank you for providing us items to review!

When I purchased the Revell Ventura kit, I thought, “wow, a decent, out of box build even I can sink the ol’ teeth into…” I did not know that True Details was working to upgrade the kit…and, with this cockpit, the detail level went up.

The major items replaced are the instrument panel, throttle/fuel mixture quadrant panel, the basic floorboard, back bulkhead, seats, and middle “island” instrument and switch panel. There are also two side fuselage panels that replace the truly understated sidewall detail in the cockpit. Several kit parts are required: the seat legs for the right-hand seat, control wheel arms to attach the control yokes, and the lower steps to the forward fuselage.