Reviews of scale model kits.

Review Author
Steven J. Corvi
Published on
Company
Arma Hobby
Scale
1/48
MSRP
$41.00

What is in the Box

  • 3 gray injection molded plastic sprues
  • 1 clear sprue
  • 1 set of pre-cut masks
  • 1 decal sheet with 3 markings options
  • 1 instruction book

Construction

The Arma 1/48 Hurricane IIC starts with an unconventional build sequence, wings first, which was like their 1/72 kit. The parts are cleanly molded with crisp detail and accurate scribing. There was no flash, the parts are molded with no sink marks, and what few ejector pin marks I did see were all in areas that were not visible on the model. There is an errata in the kit to change the fit of the wing. It is minor but something to be aware of. Also, there is an error on the ejector ports for the 20mm cannons. One must be filled while another has to move in the same area. This is up to the individual modeler to make an absolutely accurate Hurricane.

Review Author
Scott Hollingshead
Published on
Company
Zoukei-Mura
Scale
1/32
MSRP
$22.00

Zoukei-Mura is a name recognizable to many aircraft modelers, mostly for their incredibly detailed 1/32 and 1/48 scale planes. Their first offering in the armor genre, or Super Weapons Series, was the 1/32 scale Kleines Kettenkraftrad (typically shortened to just Kettenkrad). This kit includes markings for use of the vehicle by the Luftwaffe to tow planes in the later stages of WWII and will look great alongside any of the 1/32 scale German aircraft offerings from Zoukei-Mura.

Review Author
Bill Kluge
Published on
Company
Gallery Models
Scale
1/200
MSRP
$829.99

Now that the major subassemblies are complete, it was time to put the pieces of the jigsaw puzzle together. I naively thought that it would all be downhill from here, even if it was a gently sloping downhill. I didn’t quite realize how many lengthy flat spots there would be along the way.

Review Author
Bob LaBouy
Published on
Company
ICM
Scale
1/35
MSRP
$61.00

A Very Brief History the Typ 320 (W142) Cabriolet

WWII German Staff Car (from Manufacturer’s kit notes)

“The Mercedes-Benz 320 (W142), developed by Daimler-Benz AG, was launched in 1937. It was equipped with a six-cylinder engine with a volume of 3.2 liters (3.4 liters in later versions), which had 78 horsepower. It was available with a short (2880 mm) or long (3300 mm) wheelbase. The Mercedes-Benz 320 (W142) was the most prestigious of the three 6-cylinder middle-class models. One of the body variants for long-wheelbase cars was the Cabriolet. In turn, there were also several versions of this version of the Mercedes-Benz 320, which differ with number of seats, doors, and side windows. The four-seat Cabriolet B version had two doors and four side windows. This car was used by the Wehrmacht as a staff car and was also used as a vehicle for the transportation of senior commanders.

Review Author
Damon Blair
Published on
Company
ICM
Scale
1/48
MSRP
$29.00

Ryan Aircraft was awarded a contract to develop a new, second-generation target drone based loosely on the Q-2A drone. It vaguely resembled its Q-2A ancestor in general outline. The BQM-34 would spawn a whole family of remotely controlled drones, from the original aerial target, up to reconnaissance variants.

Molded in light grey plastic, there are 42 pieces in all, four of which are not used in the build. The only major problem with the kit is that the intake lip, for some reason, is a separate piece.

Review Author
Floyd S. Werner Jr.
Published on
Company
ICM
Scale
1/48
MSRP
$105.99

Boxing up multiple kits into a single boxing and offering a discount is not a new concept, however, it has yet to be as effective as what ICM currently offers in their product range. This offering offers two great aircraft and a set of figures to compliment them. A diorama waiting to be put together.

As there are three kits in this boxing, the O-2A Skymaster and the OV-10A Bronco along with USAF Personnel in Vietnam, I’ll offer three reviews in one as well.

Pilots & Technicians

First off, the personnel. This single sprue contains the parts for five figures found on a USAF flight line.

Finding figures in 1/48th scale for Vietnam is a pretty hard chore. Whether you want to depict USAF or Army helicopter pilots your choices in the past have been pretty slim. Well thanks to ICM there is at least a new option.

Review Author
Doug Cole
Published on
Company
Atlantis Model Company
Scale
1:4
MSRP
$32.99

Atlantis Models gets credit for another Tom Daniel classic save by resurrecting the Glowing Ghost of the Red Baron kit Atlantis M6742-Model Kit. At 1:4 scale it’s easy to work with and It’s a great kit for beginners too.

Attesting to its popularity the kit’s been re-released a few times in various versions as well as, but this fresh new 2023 offering by Atlantis Models is the first reissue in decades.

Originally released as kit #PC220 in 1969, and according to Tom, “I thought we could do something fun with the chrome helmet again (at the time) and sketched out this skeleton "ghost" design on a place mat at a Mexican restaurant.”

Also included is a beautiful new waterslide decal sheet featuring the Iron Cross markings from WWI and a rubber band to activate the “bobble bone” and invoke the jittering eyeballs.

The original, “far out” instructions now printed in red and black, detail the 10,740 steps required for construction.

Review Author
Doug Cole
Published on
Company
Italeri
Scale
1:24
MSRP
$52.99

For the 1974 racing season, four Porsche 911 Turbo Carrera RSR cars were produced for the Martini Racing Team introducing a turbo boost to the 911 platform. Powered by a 2.1 L turbo-charged engine providing nearly 500 HP, the #22 car driven by Muller & van Lennep took second place at the 24 Hours of Le Mans race.

This 2023 model kit re-release has been issued numerous times by various manufacturers. Italeri gives it a skill level 2 rating. It’s a simple kit to build in out-of-the-box (OOB) form (minus the decals). The kit contains 42 pieces. The body is molded in a silver color. The rest of parts are on one tree molded in black, and there’s a clear window piece with headlight lenses. The model features soft rubber tires and colorful Cartograph waterslide decals. There are instructions for 2 versions with full-color decal placement images and paint callouts.

Review Author
Eric Christianson
Published on
Company
Vargas Scale Models
Scale
1:35
MSRP
$69.95

Vargas Models specializes in unusual 3-D printed, limited-run armor models, and is now offering the M2A1 Medium tank, the forerunner to the venerable line of early-WWII medium tanks.

The unmistakable lines of the M3 Grant/Lee hull are evident in the M2A1, and the lower chassis and running gear point straight at the M4 Sherman, the most-produced Allied tank of the war. The M2 was armed with four 30-caliber machine guns mounted in revolving sponsons bracketing the turret, two additional, fixed 30cal machine guns in the front hull, and a turret-mounted, 37mm main gun. The M2 carried an impressive 12,250 rounds of ammunition for a simple reason; at the time of its design, medium tanks in the US Army were employed not as tanks proper, but as infantry support weapons. To this end, the 4 revolving machine guns and the 2 fixed hull machine guns would have greatly helped it in that role.

Review Author
Andy Taylor
Published on
Company
ICM
Scale
1:35
MSRP
$26.00

ICM continues to announce new models despite the ongoing Russian initiated war in Ukraine. While most subjects released by ICM are welcome, the current conflict subjects are even more relevant and welcome. When anything military engineer-related hits the market, I am intrigued; this kit is a double hit for me.

Unexploded munitions, Improvised Explosive Devices (IEDs), booby traps and mines are hallmarks of modern warfare. Breaching obstacles and cleaning up battlefields often fall to sappers and combat engineers. This fantastic ICM kit begs to be opened upon arrival. Upon opening the colorful lid and cover of the typical sturdy ICM box, there is a reinforced white inner box that does a good job of protecting the single sprue containing the three Sapper figures and dog, along with an advertisement folder for ICM acrylic paints.