Another addition to the Quickboost line for the Kinetic S-2F Tracker is a replacement set of engines. The set comes with four parts – two engines and two holders. They are cast in familiar gray resin and are perfectly molded.

The installation is simple. Assemble the nacelle as per kit instructions. Sand down the backing ring so it slides into the opening, paint it up and glue the engine in place, and then the cowling, and you're done.

One thing noticeable in the comparison pictures is that the Quickboost engines are missing the rods connecting the valve covers and engines. They are easily made, and if you add ignition wires you have a superb upgrade.

In summary, this is a more detailed simple upgrade which is cast perfectly and fits very well and is very visible on the finished kit. A couple simple push rods and you're there. These are definitely recommended. My thanks to Quickboost and IPMS/USA for the chance to review them.

Adding to the Quickboost line of 1/32nd scale ejection seats is this latest offering for the Trumpeter F-8 Crusader. The seat, cast in their normal gray resin, comes in two pieces. The main body and the pull ring are both perfectly cast, and the pull ring has a resin protector cast in front of it. To assemble, cut the bottom plug off the seat, trim the pull ring and attach it, and paint it up. As with all Quickboost seats, the belts are molded in and have a nice draping effect to them. I included several shots of the seat plus a shot of the kit seat and the Aires seat. The kit seat is styrene and does have a set of PE belts, and for a kit seat is pretty nice. The Aires seat is, not surprisingly, very similar to Quickboost's, but the belts are multiple PE parts, as well as some seat detail. In looking at the seats, either the Aires or Quickboost are much better defined and accurate.

Background

In 1979, Ridley Scott introduced moviegoers to a new genre of cinema, the Sci-Fi Horror film. Set on an isolated spaceship, the film’s spook value was enhanced by minimalist glimpses of the alien life form that picked off the crew one by one. In the final confrontation, it was the determination of the female action hero (and her cat) that enabled her to survive the ordeal and eliminate the threat.

MPC originally released a 1/9th scale model of the Alien creature. I bought my first one from the local Sears department store in Pembroke Mall in Virginia Beach, back in the day when they carried everything. The legs were immobile, with only head at the neck and the arms at the shoulders articulated. From that kit, I started to learn the skills of cutting, re-positioning, and posing figures.

History Brief

The Nakajima B6N1 Type 11 attack/torpedo bomber Tenzan, Allied code name “Jill”, was introduced in 1943 as a replacement for the B5N Kate. It was a big improvement over the Kate and, although faster and more maneuverable, it was still no match for the U.S. Navy’s carrier-based fighters. The losses were so great that only one Jill is known to be in existence today.

There were two main production variants of the Jill – the earlier Type 11 and the later Type 12. The Type 11 had the more powerful Mamori Model 11 power plant, a 14-cylinder radial (rated 1870 hp at takeoff), but it proved to be unreliable. The Mamori engine was dropped in favor of the more dependable but considerably weaker Kasei powerplant in the Tenzan Type 12 design.

This is the second product in Eduard’s FABRIC line of seatbelts I have had the pleasure of reviewing. Earlier. I reviewed the 1/32 WWII USAAF fabric seatbelts at http://web.ipmsusa3.org/content/wwii-usaaf-fabric-seatbelts

This set is very similar to the USAAF one, with additional detail to reflect the higher complexity of Luftwaffe belts. As with the USAAF set, the belts themselves are made out of some sort of fine gauze-type material, and have only small attachment points keeping them on their fret. The material is pre-colored, with the belts in a light tan, pads for under the buckles in a slightly darker color, and one leather tab in a brown color. Very faint stitching lines and fabric weave details are evident as well. There is even stenciling and data plate info printed onto the fabric.