Quickboost provides a very large array of aftermarket detail parts, uniformly outstanding in quality and fidelity to detail and scale. This QB product is just one of several that can be used to detail the Tamiya A-1H kit.

Tamiya provides a rather simple part in their A-1H kit ( # 61058) that represents the Boot Enclosure in its stowed position. The Tamiya part in question is Part A6 which is added to the airframe in step 11 in the Tamiya instructions.

In a side-by-side comparison of part A6 and the QB Boot, the boot has the proper length and width and matches the length of part A6, or that bit of A6 in question. All that is necessary is to clip off the “hood” area of A6 and replace it with the QB part.

In under a minute one can improve the appearance of the cockpit significantly by using this QB product.

Background

Scale Aircraft Conversions (SAC) produces white metal landing gear for various aircraft models in 1/144^th, 1/72^nd, and 1/48^th scale. Most sets are direct replacements for the kit parts.

The Parts

The Revell F-89D/J has been around since the early 1990s (my boxing has a copyright date of 1992). Revell of Germany has recently re-issued this kit, and no matter which boxing you get, it is a nice model of the F-89D/J. The SAC landing gear for the F-89 are direct replacements for the kit parts. The white metal parts have some mold lines that will need to be cleaned up, but are otherwise is great condition. Due to the nature of the material used, I do feel that some of the finer details of the landing gear are not as crisp as their plastic counterparts. However, after some paint and weathering this should not be an issue.

History

Much has been written about the Gloster Gladiator, and information is available everywhere, so this sketch will be understandably brief. The Gladiator was designed to a 1930 Air Ministry specification, and the prototype first flew in 1934. A development of the Gloster Gauntlet, the Gladiator differed in having more power and an enclosed cockpit, along with other aerodynamic improvements. The initial production order was for 23 aircraft, but eventually a total of 378 Gladiators was built between 1936 and 1937. An improved version, designated Gladiator Mk. II, has a three bladed fixed pitch Fairey-Reed metal prop and detail differences. 270 Mk. II’s were built between 1938 and 1940, when production ended.

Couple of thank you notes up front; to Hornby for bringing Airfix back from the abyss and turning it around; an Injection-molded 1/48 Javelin is one we could only dream of in the past, and here it is! And to Hornby America, who provided IPMS USA this great model of an iconic British cold war fighter. (And thanks to Dave and Dick for the build opportunity!)

The last time I built a “flatiron” as these were called, was the old Dynavector 1/48 vacuum molded kit about 15 years ago. It had a wealth of detail, and was actually very easy to build. The kit is still viable (I have another one sitting on the shelf waiting to e built), but the Injected version is far better in the full-Monty detail realm. The only tricky part was installing the forest of vortex generators on the wings, as these were brass tiny brass tabs with small spears to push into holes on the wing… surprisingly enough, they worked well on the soft plastic and were very durable. Ah, the old days….

Quickboost is known for producing finely cast resin details. This seat is no exception. The details are very good but some are fragile, such as the ejection rings, which quickly broke off and disappeared. This isn’t so much a function of the piece, but of careless handling on my part. They are easy to break, so be prepared to make up your own if you snap them off.

Removing the seat from the resin casting plug was easy enough with a razor saw. However, I eventually had to cut more, about 1/8”, from the seat bottom to get a decent fit in the Hasegawa 1:72 F-104C kit. I don’t know if this is a function of the kit or the seat.

Once painted, and with a subtle wash, the seat details pop out. After modifying the seat bottom as above it was a drop fit into the cockpit.

The Quickboost replacement seat is far better than the simple plastic form that Hasegawa supplies, plus, it has seat belts cast in. A worthy addition to your Starfighter.